How to set up CABLE internet connection

Hi,
I just installed Solaris 10 version. I am using Cable modem for internet.
Can somebody tell me how to set up internet connection please?
Thank you

Hello,
1. Please make sure that you are able to ping to the cable modem by setting both IP of both cable modem and system in the same range.
Hint: Please read the catalog come with cable modem to find default IP and change the System IP to the same range.
Normally the IP will be 192.168.1.1 or 192.168.0.1
2. Access the cable modem through browser with the URL http://192.168.50.50 and make necessary changes.
2. Set the DNS in your system by editing /etc/resolv.conf. touch if it is not there.
3. Set the proxy in your browser if ISP have.
3. Then reboot the system.
Please follow the steps and let me know details.
Thanks,
Sal.

Similar Messages

  • Windows Mobile 6 & BT stack - How to set PC - PDA - Internet connection

    Hello,
    My configuration : another manufacture laptop with True Mobile 350 (Toshiba stack)
    and a PDA Windows Mobile 6 PocketPc (Phone Edition)(TyTn)
    I would like to use my PDA as a PAN server to use its internet connection with my laptop (PC -> PDA -> Internet. I've paired the two devices, but when I activated the Internet sharing on my PDA i've no feature on my laptop to access the PAN created by the PDA.
    "The auto discovery is the only way to set up services. However, the PAN service doesn't display unless the devices are paired.
    Toshiba can only Pair with devices seen during discovery.... "
    http://forum.xda-developers.com/showthread.php?t=297561&highlight=bluetooth+intern et+sharing
    I'm not the only one to have a problem and I have already installed the v5 of the stack.

    Hi
    Did you already check this Toshiba Bluetooth "FAQ" and "How to" area??
    http://aps.toshiba-tro.de/bluetooth/
    There you can find useful HOW TO documents for example about:
    - InternetAccess on PDA via PAN using Notebook as Gateway
    - Browse Notebook-share via PDA and PAN
    - etc
    Maybe you will find some useful advices.
    PS: Sorry Im not a BT expert and therefore I cannot say much about this case

  • Please, help me to set up wireless Internet connection. M...

             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?

    Pensive wrote:
             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?
    hi pensive ,
     Seems interesting , first do this -  push the reset button on the back of router .
    push it till 30 seconds , unplug the power cable and plug in the power cable back in After completion of 30 seconds.
    then try to log into , 192.168.1.1 again . with the password "admin".
    see if it reply?
    Else -
    strt>cmd>ipconfig /all - post the result ?
    pe@c3
    Message Edited by meteor on 01-09-2008 05:58 AM
    ~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

  • How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • Asking to set up an internet connection when we press approve button

    Hi friends can u expalin me
    when i press approve button in the notification it is asking for set up an internet connection wizard
    i am attaching the screen shot can u have a look please
    thanks
    sesh

    Probably you are working on the server itself (windows) i.e the same machine on which you have installed Oracle Applications and the time you press the notification it is trying to send a email for which the wizard comes up.
    Anyways i did not see any screen shot.
    Sam
    http://appstech-sam.blogspot.com

  • How to switch off the internet connection via GPRS by iphone 3G

    how to switch off the internet connection via GPRS by iphone 3G?
    need help.
    thanks

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • How to share an airport internet connection with XP thru a crossover cable

    Any help appreciated - My iMac is connected to the internet and home network through airport. I would like to connect an XP machine to the iMac through ethernet with a crossover cable. I'd then like to be able to share the iMac's internet and network connection with the XP and file share between computers.
    How should I configure the machines? I can get them to share files (with a manual IP address) but even though "Internet Sharing" is clicked on the iMac the XP does not connect to the internet.
    iMac is running 10.5.6
    thanks for any help!

    Yes, I do have "internet sharing" turned on. It is set to share the connection from Airport to computers using Ethernet. But there is no internet on the PC. Should they both be set for DHCP? (they are)

  • How do i get an internet connection from my Mac to my iPad using a usb cable?

    I have a Mac connected to the internet through a modem. However, i also want my iPad to share this connection through the usb cable. Is this possible? If not, is there any other way i can get my iPad to share the internet connection from my Mac?

    It look like you can turn your mac into a hotspot and connect your ipad to it via wifi.
    http://computers.tutsplus.com/tutorials/quick-tip-use-your-mac-as-a-wi-fi-hotspo t-and-more--mac-46462

  • Setting-up the Internet Connection

    Hi All, my systems has the following Linksys products:
    modem - ADSL2MUE
    wireless router 1 - WRT54GS (1st floor)
    wireless router 2 - WRT54G (2nd floor)
    switch - SR2024 (for cable connections)
    I was able to connect all the PC to the internet. My problem is I could not make all the PC be in same Gateway number in which I could not share the network printers and files to all PCs. Is there any way to solve this problem? Below are settings to each device:
    ADSL2MUE - Bridge Mode only
    WRT54G - IP Address (192.168.1.1), PPPoE
    WRT54GS - IP Adress (192.168.2.1), DHCP
    * ADSL2MUE Internet Port is connected to WRT54G Internet port
    * WRT54G Ethernet Port 1 is connected to SR2024 Ethernet Port
    * WRT54GS Internet Port is connected to SR2024 Ethernet Port
    * Printer 1 is connected to SR2024 Ethernet port (2nd floor)
    * Printer 2 is connected to WRT54GS Ethernet Port (1st floor)
    * All PCs in the 1st floor is using 192.168.2.1 gateway number thru WRT54GS wireless connection.
    * All PCs in the 2nd floor is using 192.168.1.1 gateway number thru WRT54G and SR2024.
    I need your help on this.
    Best rgds, joven

    It does not matter how you set the internet connection type on the second router when nothing connects to the internet port. The internet connection type is used for the configure of the connection through the internet port. As nothing is connected in the internet port the setting is basically inoperable and makes no difference whatever you set there. You should not set a static IP address as that may affect the routing tables on the router even if the internet interface is down. Thus, just leave it on Automatic/DHCP and it should be fine.

  • Setting up secure internet connection

    how can i create a secure internet connection on my imac 10.5.8?
    I notice when i click on the airport icon at the top of the screen there are other networks in the neighborhood that a listed but each one has a lock next to it requiring password. Any guidance would be great. thanks

    In addition to Ralph's excellent advice, I've got a couple of questions:
    What type of internet connection and modem do you have and who is your ISP?
    If you have cable or FioS and the Mac is within ethernet cable distance from the modem, that type of connection is faster and more reliable (fewer signal dropouts than wireless).
    Or are you trying to set up a wireless home network?
    In that case, you need a wireless router; follow Ralph's suggestions. Most routers do not come with Mac-friendly setup software, so you will need to log into the router's website (should be in your manual and usually something like 192.168.x.x; user name and password usually preset, but should be changed once setup is complete). After logging in, you can go through the settings and security is best at WPA2.
    +I notice when i click on the airport icon at the top of the screen there are other networks in the neighborhood that a listed but each one has a lock next to it requiring password.+
    Or are you simply trying to use your neighbors' internet connection? You won't be able to.

  • How to set up wifi hotspot connectivity

    I have an old laptop that was upgraded from XP to Vista Business. It runs OK but is very slow. I have Fios wireless at home and it connects fine, but the In-house Agent won't run properly (blank pages for the Internet & Phone sections...Chat tech was unhelpful). My question is: how can I set up the hotspot connectivity without having to use the worse-than-useless In-house agent?

    the link I gave is for a windows machine 
    Droid has it's own app, and boingo is what Verizon uses - so you can safely download boingo and then when it asks for your login, you put your VZ log in info.   
    you DO have to create a seperate WIFI log in though,  So you should go to www.verizon.net/
    Hover over my verizon and then select VIEW all from the my services menu  > then select internet on the left hand side menu > then select manage under the verizon wifi section.
    Manage gives you two options 
    Find Wifi Hotspots 
    WiFI how to demos
    Select Wifi how to demos and then click and follow the registration link
    when you get there, it wants you to sign in, you sign in with your main account, and then you go through the Wi-fi registration steps to make a Verizon WIFI username  
    these are going to be seperate usernames, one used for your account and online access, you already have this one
    and the next is one specifically for wifi hotspot access, you are creating this one (if you haven't already done so) 

  • 10.6.1 Server - how to set up as internet gateway with dynamic IP?

    Hi,
    I installed Snow leopard server 10.6 on a macpro, to share server services (address book, ical, web, mail and VPN) over my office local network, wirelessly (less than 10 computers, all macs).
    I would like to set it as a gateway, as indicated on the manual "getting started", so: Internet > adsl modem > server > Time capsule/extreme (for sharing wirelessly the internet connection and all the services provided by server).
    I don't have a static IP address and i don't have a DNS managed from ISP.
    I tried to read many posts, discussions and apple/resources manuals, but i didn't find out the right way to fix this, with proper configuration of DNS, to keep it standing.
    Which steps should i follow?
    Note: There is a thread from Singapore for setting up server without a static IP, but the configuration is: internet > DSL modem > airport > server (it's not specified how users can connect from outside the network)
    i would like instead to set up the configuration explained above: internet > adsl modem > server > Time capsule/extreme
    Thanks in advance for your help
    Pietro

    Check out this reference material. http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.6.pdf
    It's a little lengthy and in-depth, but not terribly difficult to walk through.
    In short:
    1.- pick an address range (192.168.1.1-254, for example)
    2.- assign a static ip to your server (192.168.1.1)
    3.- configure your server's network interface to point at your current router (adsl modem), and use your server's static ip for dns lookups
    3.- turn on the dhcp service and configure a scope (192.168.1.20-254, to give you a few addresses at the bottom of the range outside the leasing scope)
    4.- turn on the dns service and configure a forward and reverse lookup zone for your internal domain name (internal.yourcompany.com)
    5.- configure your clients to pull addresses from dhcp
    I'm sure I missed some important stuff, and don't be upset if your neighborhood gets access to your internal resources due to a misconfiguration of your routers acl's.
    If you're still not clear on what to do, bring in an I.T. consultant for a short engagement to initialize and stand up all your services and show you how to support them.

  • How to set my Firebox email connection? Must I use explorer?

    I AM A NEW CUSTOMER OF FIREBOX.
    I WANT HELP IN SETTING A FIREBOX HOME PAGE FOR LAMPMAN99 /
    My previous browser was Internet Explorer: I DO NOT WANT INTERNET EXPLORER,
    ... I DO WANT FIREBOX BROWSER WITH A FIREBOX EMAIL ADDRESS CONNECTION
    FOR [email protected]
    Do I have to add something to identify myself as [email protected] ??
    I am keeping my old email browser with my old (OTHER NAME ) email address.
    I do not know how to set my pc up for this new FIREBOX SYSTEM.
    HOW WILL I GET YOUR REPLY IF I CANNOT ACCESS MY FIREBOX EMAIL...
    my other email address is [email protected] [email protected]
    My FIREBOX email is: [email protected] ( I HOPE AND I THNK ???)

    Check hete
    *http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • How do I change itunes internet connection to firefox

    how do i change internet connection from internet explorer to firefox?

    You posted in the iPod Touch forum.  I think you need to post in the itunes forum.
    Try going to preferences in FireFox and set Firefox as the default browser. 

  • How do I fix this internet connection with Mobile Me setup?

    Hi to the forum,
    I purchased an apple ipod touch from Officeworks a few months back, and finally decided to set it up to work today.
    I would like to get the Mobile me setup going, so I can locate my ipod if I accidentally lose it somewhere.
    The only problem, is that after I have entered my password [which I am believing is the same as my apple itunes password to download intunes], I get this message saying:
    "Verification Failed. The internet connection appears to be offline."
    I am not sure how to join my ipod touch to the internet. I have it connected to my computer and I have itunes going, and my ipod is showing it is connected to my itunes program. I just can't workout how to actually have my ipod connected to the internet.
    I am using Windows 7, and it is 64 bit.
    Thanks if anyone has any clues as to what I should do here.
    best,
    Steve :-)

    Hi Vazandrew,
    thanks kindly for your reply. I will check out the link.
    thanks and best,
    Steve :-)

Maybe you are looking for