How to set up connection for directv receiver, TV, and home theater system?

Can some one please show me the CORRECT way to connect my Directv receiver (it has no HDMI), Panasonic Viera HDTV (has 3 HDMIs) and my Samsung home theater HT-Z510 (has 1 HDMI)? The second question is with the set up that you advise, can I play the TV sound through my home theater speakers? and How do I do that each time I want to listen the TV sound through my home theater speakers? I am new and confused about all this so please provide or explain step by step please. Thanks in advance.

Making sense of your connections on a message board is never easy. Hopefully you can piece this information together.
Direct TV box to Panasonic TV using S-video cable....assuming it's standard definition. Component video if the box is HD. Run standard stereo RCA cables to the appropriate input for sound threw the TV speakers.
Your Panasonic TV will have a set of stereo(left/white,right/red) outputs. Run cable from that output into the same inputs on the Samsung surround unit. Use the sound units effects to acheive simulated surround. This is assuming you have no digital outputs on your box. If you do, you'll be able to get 5.1 when available using a digital connection.
Good luck.
Disclosure: Former BBY employee.

Similar Messages

How to connect Apple TV to projector and home theater system?

I have an Optoma HD20 projector that I have a long hdmi cable connected to and plugged that into my Apple TV. I also have an older home theater system that does not have an optical audio input. So I bought an adapter to go from optical audio to RCA cables. When I get it all plugged in and turned on I can't even get the video on my screen. What am I missing?
This is the adapter...
http://www.amazon.com/gp/aw/d/B005F20756

Darn. Ok. Then do you have any suggestions for other options to connect the two? My projector is mounted to the middle of the ceiling with a whole for the wires that go along inside the ceiling to the other side of the room.

Please help with TV and home theater system for very large basement room....

I'm looking to get my boyfriend either a TV or home theater system for the basement. I know he eventually wants a 3d TV. Right now he has a set up where he has 2 tv's so he can play video games and watch sports.
The basement that the tv and home theater system will be in is large (I'd estimate at least 15 ft x 30 ft...maybe more) so I want to make sure the home theater system will be enough for the room. We live in a ranch so basically the basement is almost the size of the house with some of it being storage.
I've started to look at products online but there are so many and technology isn't really my thing.
If anyone could help with recommendations for the home theater system and/or the tv I'd appreciate it!
Thanks so so sooo much!!!!

What will he be using the HT system for? Just watching sports or skipping the movie theater and watching them at home. If you plan to watch them at home your going to be on a tight budget with the home theater system but it is possible. Spend good money on the sub, that is one speaker you don't want to skimp out on. With such a big space you have a lot of room to fill and the cheap subs aren't going to cut it. You will probably need two subs as it is. The speakers I recommend on a tight budget Polk or Klipsch. My list includes a Denon receiver as I am a Denon fan but Yamaha, Onkyo, or Pioneer will suffice.
Here is a Option 1 will run you about 1700 with just one sub. You could always go up a model on each speaker if you feel the one sub is enough. I like an explosion sounding like it happened in front of me so that is why I mention 2 subs.
http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
http://www.bestbuy.com/site/Polk+Audio+-+Dual+5-1/4%22+2-Way+Floor+Speakers+(Each)+-+Black/8825453.p... speakers&cp=1&lp=12
http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Bookshelf+Speakers+(Pair)+-+Black/8825444.p?id=120... speakers&cp=1&lp=2
http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Center-Channel+Speaker+-+Black/8826149.p?id=120735... speakers&cp=1&lp=28
http://www.bestbuy.com/site/Speakers/Subwoofer-Speakers/abcat0205008.c?id=abcat0205008&&initialize=f...
Option 2 will cost $1400 before a subwoofer
http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-CC+Ompipolar+3-Way+Center-Channel+Speaker+-+Blac... speaker&cp=1&lp=11
and 4 of the below speaker
http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-SAT+4-1/2%22+2-Way+Satellite+Speaker+(Each)+-+Hi... speaker&cp=1&lp=15

How to connect mid 2012 MacBook Pro to home theater system

Okay so I'm looking at purchasing a home theater system and was wanting to know the best way to connect my mid 2012 MacBook Pro to the home theater system and TV. I am wanting to play both movies (Netflix etc) and music. Will my MacBook play 5.1 surround sound to the home theater system? Whats the best way to connect this all up? MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter? My thinking was to separate the video and audio to get the best picture and sound. Any help/advice on this would be greatly appreciated.

Will my MacBook play 5.1 surround sound to the home theater system?
Yes.
Whats the best way to connect this all up?
An AppleTV or any AirPlay-enabled AVR. AirPlay is wireless, though you could use wired Ethernet if you want to avoid all the potential problems associated with wireless. Make sure it specifically says AirPlay which is Apple's proprietary technology. There are quite a few of them to choose from today. Denon is one, I believe Pioneer, there may be others. Shop around. The AppleTV's price was recently reduced to $69 US and may actually be the most cost-effective solution, allowing you to research the best AVR for your needs. The AppleTV has both HDMI (audio and video) and optical audio outputs.
MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter?
Way too complicated But if you really don't want to use AirPlay, you can purchase an inexpensive (< $10) Thunderbolt to HDMI adapter and an equally inexpensive (<$3) HDMI cable to any HDMI input on your AVR.
My thinking was to separate the video and audio to get the best picture and sound.
It makes absolutely no difference. HDMI and optical audio use completely identical digital audio signals.

How to set different font for numbers in headings and TOCs

Hi,
I've noticed some people use a different font for numbers in headings and TOCs to get some extra magic. Is there any way to automate such use of fonts in the paragraph styles?
Oh, and any suggestions on what fonts would be good for numbers?
Thanks!

I was merely continuing on the original theme -- any digit in any character style. It was only later revealed that (a) the OP needed old style figures, and (b) those were available in his font from the start.
The negative lookahead is the answer to his question (copied in full now)
Based on the above InDesignSecrets tutorial, does anyone know what to do if some of the numbers end with a dot or a comma?
Like the Norwegian date format: 13. mai 2009
Or the Norwegian way of pricing items: 2900,-
and my example shows it can be done, but with an added caveat. If digits are to be set in red, using the exceptions the OP asks for, my example sentence will come out as
"Think of a number between 1 to 10, but don't use 9."
rather than the (here) intended
"Think of a number between 1 to 10, but don't use 9."

Connecting the Audigy 2 to a home theater sys

I've seen a lot of posts on this subject, but have seen a number of different answers. Hopefully I can get a definiti've answer...
I have an Audigy 2 ZS card (ordered as part of a Dell E50) in my PC and want to connect it to my home theater system. The home theater system has both analog, digital coax, and digital optical inputs. I want to get the best possible sound quality coming out of the PC to play music, thus I would like to have a digital connection between the PC and receiver.
The question I have is specifically what type of connector do I need to make this digital connection. I have seen people mention using a regular mini-plug to RCA connector, but didn't really say whether that got a digital signal or not.
I've looked on the Creative web site a bit, and saw some cables, but didn't know for sure which one was the right one. Please advise specifically what kind of cable I should get for this.
Thanks.

You will have to ask the store if they have a 3.5mm minijack to RCA cable. Somewhere within the Getting Started program of the Audigy 2 ZS Sound card they have a section which shows you illustrations on how to connect your sound card to different setu
ps.
The digital connection will give you the purest stereo signal for your music, but you will not get surround sound unless you are listening to a surround sound?digital feed which the Home Cinema Recei'ver can understand (i.e. Dolby Digital, DTS, or regular PCM). This means that unelss you are listening to DVD Videos?with Dolby Digital or DTS soundtracks, you will only get stereo sound out the speakers, no multi channel EAX, no DVD Audio or CMSS either. Best thing to do is to connect the sound card to the Home theater system using Analog Mutlichannel input. Get 3 3.5mm to 2 Phono Cables. Plug each 3.5mm end into Line out ,2 and 3 on the back of the sound card. At the other end of the cable, match the 2 phono plugs?to the respecti've sockets on the home cinema amp. For example Line out is the front left and right speaker so just match white with Front Left and red with Front Right. Line out 2 - white goes to Rear/Surround Left and Red goes to Rear/Surround Right, irrespecti've of the colour coding on your amp.
Line out 3 - white goes to Center, red goes to Subwoofer, irrespecti've of the colour?coding again?- am not too sure on this one so be ready to reverse the connections if the speaker test comes out wrong or the "Front Center" voice booms out of your subwoofer!?By connecting it through multi channel analog input, the sound card will do all the decoding, so you can enjoy CMSS, EAX, Neo:6 and any other multi channel pleasure that the Sound Card provides in all its glory. The digital connection will provide purer sound but NOT surround sound unless you invoke a multi channel source such as a Dolby Digital or DTS?DVD, this is of course assuming you have set up the DVD software to correctly channel the sound to the SPDIF out and then set the sound card to passthrough SPDIF signals through digital out!?Good luck and hope that hel
ps.

How to set the connection parameters for SQL

How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi ‏21 KB
Doc1.doc ‏45 KB
db1.mdb ‏112 KB

Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

How to set a   background for jFrame?

Hai.i have a code for background image.i.e
* TextOver.java
* Created on June 23, 2008, 1:53 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
import java.awt.Dimension;
import java.awt.Graphics;
import java.awt.image.BufferedImage;
import java.io.IOException;
import java.net.MalformedURLException;
import java.net.URL;
import javax.imageio.ImageIO;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
public class TextOver
private static final String IMAGE_PATH =
"http://upload.wikimedia.org/wikipedia/commons/b/b5/HMS_Cardiff_%28D108%29_1.jpg";
private BufferedImage image;
private JTextArea textarea = new JTextArea(20, 40);
private JPanel mainPanel = new JPanel()
@Override
protected void paintComponent(Graphics g)
super.paintComponent(g);
if (image != null)
g.drawImage(image, 0, 0, this);
public TextOver()
URL imageUrl;
try
imageUrl = new URL(IMAGE_PATH);
image = ImageIO.read(imageUrl);
Dimension imageSize = new Dimension(image.getWidth(), image.getHeight());
mainPanel.setPreferredSize(imageSize);
JScrollPane scrollpane = new JScrollPane(textarea);
textarea.setOpaque(false);
scrollpane.setOpaque(false);
scrollpane.getViewport().setOpaque(false);
mainPanel.add(scrollpane);
catch (MalformedURLException e)
e.printStackTrace();
catch (IOException e)
e.printStackTrace();
public JPanel getPanel()
return mainPanel;
private static void createAndShowGUI()
admin_login_code a=new admin_login_code();
a.setVisible(false);
JFrame frame = new JFrame("TextAreaOverImage Application");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.getContentPane().add(new TextOver().getPanel());
frame.pack();
frame.setLocationRelativeTo(null);
frame.setVisible(false);
public static void main(String[] args)
javax.swing.SwingUtilities.invokeLater(new Runnable()
public void run()
createAndShowGUI();
i want to give this backgground to my existing jFrame something like
import java.sql.*;
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class admin_login_code extends javax.swing.JFrame {
String admin_name;
String password;
Connection con;
Statement stmt;
ResultSet rs;
public admin_login_code() {
initComponents();
jPasswordField1.addKeyListener(new KeyAdapter() {
public void keyTyped(KeyEvent e) {
char c = e.getKeyChar();
if (!(Character.isDigit(c) ||
(c == KeyEvent.VK_BACK_SPACE) ||
(c == KeyEvent.VK_DELETE))) {
getToolkit().beep();
e.consume();
jFormattedTextField1.addKeyListener(new KeyAdapter() {
public void keyTyped(KeyEvent e) {
char c = e.getKeyChar();
if (!(Character.isLetter(c) ||
(c == KeyEvent.VK_BACK_SPACE) ||
(c == KeyEvent.VK_DELETE))) {
getToolkit().beep();
e.consume();
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
jLabel1 = new javax.swing.JLabel();
jPanel1 = new javax.swing.JPanel();
jLabel2 = new javax.swing.JLabel();
jFormattedTextField1 = new javax.swing.JFormattedTextField();
jLabel4 = new javax.swing.JLabel();
jPasswordField1 = new javax.swing.JPasswordField();
jPanel2 = new javax.swing.JPanel();
jButton1 = new javax.swing.JButton();
jButton3 = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jLabel1.setFont(new java.awt.Font("Tahoma", 1, 36));
jLabel1.setForeground(new java.awt.Color(255, 0, 0));
jLabel1.setText("ADMIN LOGIN");
jLabel2.setFont(new java.awt.Font("Tahoma", 1, 24));
jLabel2.setText("Admin Name");
jFormattedTextField1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jFormattedTextField1ActionPerformed(evt);
jLabel4.setFont(new java.awt.Font("Tahoma", 1, 24));
jLabel4.setText("Password");
jPasswordField1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jPasswordField1ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(39, 39, 39)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jLabel4)
.add(jLabel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 161, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(43, 43, 43)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPasswordField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 190, Short.MAX_VALUE)
.add(jFormattedTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 190, Short.MAX_VALUE))
.addContainerGap())
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(47, 47, 47)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 34, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jFormattedTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(60, 60, 60)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jLabel4)
.add(jPasswordField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
jButton1.setText("Login");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
jButton3.setText("Exit");
jButton3.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton3ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel2Layout.createSequentialGroup()
.add(38, 38, 38)
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 93, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 110, Short.MAX_VALUE)
.add(jButton3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 93, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(55, 55, 55))
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.add(38, 38, 38)
.add(jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jButton3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 32, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 32, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(30, Short.MAX_VALUE))
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(574, 574, 574)
.add(jLabel1))
.add(layout.createSequentialGroup()
.add(459, 459, 459)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))))
.addContainerGap(521, Short.MAX_VALUE))
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(149, 149, 149)
.add(jLabel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 66, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(43, 43, 43)
.add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(42, 42, 42)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(250, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void jPasswordField1ActionPerformed(java.awt.event.ActionEvent evt) {
private void jFormattedTextField1ActionPerformed(java.awt.event.ActionEvent evt) {
private void jButton3ActionPerformed(java.awt.event.ActionEvent evt) {
Object src=evt.getSource();
if(src==jButton3)
dispose();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
Object src=evt.getSource();
if(src==jButton1)
admin_name=jFormattedTextField1.getText();
password=jPasswordField1.getText();
try
Class.forName("oracle.jdbc.driver.OracleDriver");
con=DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:orcle","scott","root");
stmt=con.createStatement();
rs=stmt.executeQuery("select admin_name,password from admin_registration where admin_name='chandana' and password='8989' ");
while(rs.next())
if(admin_name.equals(rs.getString(1))&&password.equals(rs.getString(2)))
admin_registration a=new admin_registration();
a.setVisible(true);
dispose();
else
JOptionPane.showMessageDialog(null,"Please enter admin name & password ");
catch(ClassNotFoundException e)
e.printStackTrace();
catch(SQLException e)
e.printStackTrace();
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
admin_login_code a=new admin_login_code();
a.setVisible(true);
// Variables declaration - do not modify
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton3;
private javax.swing.JFormattedTextField jFormattedTextField1;
private javax.swing.JLabel jLabel1;
private javax.swing.JLabel jLabel2;
private javax.swing.JLabel jLabel4;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPasswordField jPasswordField1;
// End of variables declaration
Can any one can help me how to set a background for jFrame?
Thank you in advance.
Edited by: forums.com on Jul 14, 2008 1:40 AM

90% of the code you posted is not relevant to your question.
If you want further help post a Short, Self Contained, Compilable and Executable, Example Program (SSCCE) that demonstrates the problem.
And don't forget to use code tags when posting code.

How to set up NAT for two servers using same port with ASDM ASA 5505

Hi there,
We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. Here is the scenario: On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server:
Outside user enters FQDN:5004 and this translates to Database server # 1 as 192.168.1.40:5003
and
Outside user enters FQDN:5003 and this translates to Database server # 1 as 192.168.1.38:5003
If so, what is the easist way to get this done? Or is there a better what to handle this scenario?
Thanks in advance,
James

I would create two objects and use object NAT
object network Obj_5004
host 192.168.1.40
object network Obj_5004
nat (inside,outside) static service tcp 5003 5004
object network Obj_5003
host 192.168.1.38
object network Obj_5003
nat (inside,outside) static service tcp 5003 5003
Of course you will need to open your outside interface for tcp ports 5003 and 5004 to make this happen

How to set share folder for mac 8.6 in windows

I know how to set share folder for mac 8.6 in windows xp. I installed the NetBIOS. But i still can not found windows share file in mac 8.6. Need to install 'DAVE'?

I want to setup file sharing. Then, I will setup share printer for mac8.6. I tried to config File Sharing control panel. But it do not scuccessful. Do have you way to solve file sharing and share printer problem. Not use NetPresenz.
I follow the website to setup file sharing. But I is not successful.
the website:
http://homepage.mac.com/car1son/os9xnet_nfilesharing.html
I go to appletalk control panel to connect via choose ethernet bulit-in. It appear a error. The error is 'An error occurred attempted to use Ethernet bulit-in. Make sure your network connection are correct.'
Thank you very much for your help.

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to set background color for selected days in DateChooser

How to set background color for selected days. I created
checkbox for each day [Son,Mon,Tue,Wed,Thu,Fri,Sat] and a
DateChooser, I want to change the background color for the selected
day when i click on a button after selecting the desired checkboxs
[ monthly wise/yearly wise]
Thanks in advance

There is no button involved in the following code, but it may
be of use to you:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()">
<mx:Script>
<![CDATA[
private var origColor:uint;
private function init():void {
origColor = dc.getStyle("selectionColor");
public function setBackGrdColors(newColor:uint):void {
dc.setStyle("selectionColor", origColor);
if(dc.selectedDate){
var dayOfWeek:Number = dc.selectedDate.day;
else{
return;
switch(dayOfWeek) {
case 0:
if(sun.selected)
dc.setStyle("selectionColor", newColor);
break;
case 1:
if(mon.selected)
dc.setStyle("selectionColor", newColor);
break;
case 2:
if(tue.selected)
dc.setStyle("selectionColor", newColor);
break;
case 3:
if(wed.selected)
dc.setStyle("selectionColor", newColor);
break;
case 4:
if(thu.selected)
dc.setStyle("selectionColor", newColor);
break;
case 5:
if(fri.selected)
dc.setStyle("selectionColor", newColor);
break;
case 6:
if(sat.selected)
dc.setStyle("selectionColor", newColor);
break;
default:
break;
]]>
</mx:Script>
<mx:VBox horizontalAlign="center" verticalGap="20">
<mx:DateChooser id="dc" textAlign="left"
change="setBackGrdColors(cellColor.selectedColor)"/>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="sun" label="Sun"/>
<mx:CheckBox id="mon" label="Mon"/>
<mx:CheckBox id="tue" label="Tue"/>
<mx:CheckBox id="wed" label="Wed"/>
</mx:HBox>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="thu" label="Thu"/>
<mx:CheckBox id="fri" label="Fri"/>
<mx:CheckBox id="sat" label="Sat"/>
</mx:HBox>
<mx:HBox width="300" horizontalAlign="center">
<mx:Label text="Background Color" />
<mx:ColorPicker id="cellColor"
selectedColor="#FF00FF"/>
</mx:HBox>
</mx:VBox>
</mx:Application>

HT5622 hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

The iPhone has a feature called "Activation Lock" described here:
http://support.apple.com/kb/PH13695
Without that Apple ID, you will not be able to use that iPhone.

How to set up connection for directv receiver, TV, and home theater system?

Similar Messages

Maybe you are looking for