How to set up DDNS with a BEFW11S4 wireless router

I dont see any obvious way to set up a DDNS server on this product. Any help?
Message Edited by bixfisher on 06-11-2009 08:24 AM

The Router offers a Dynamic Domain Name System (DDNS) feature. You can choose which services you want to use. The two choices are :
DDNS.org : http://www.dyndns.com/
TZO : http://www.tzo.com/
You have to sign up with the Service DynDNS or TZO...
Access your router's web interface and go to the DDNS tab under the Main tab 'Setup'

Similar Messages

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

How to set this filters with 'or' relationship

Hi Pros,
      I have a query as follows, rows and columns are all in structures.
                                                   regular_employees
             active_employees
             lay_off_employees
     I want to set up filter as ' employ_status = 0 or employ_subgroup =2' for this query, please tell me how to set this filters with 'or' relationship.

Hi Yifei,
Create a formula and enter this (let's name this FORMULA_KF):
((EMPLOY_STATUS = 0) OR (EMPLOY_SUBGROUP = 2)) * enter value IF_TRUE + enter value IF_FALSE
Then create the condition to HIDE the rows having those values to be filtered (if this is your purpose)..
Like,
FORMULA_KF <> 1
Is this what you want mate?
Regards,
Loed

How to set task description with paragraphs at runtime

Hi Experts, How to set task description with paragraphs at runtime. Now, i can set single content in task description.however, not sure, how to set content which have paragraphs.

Hi,
You can use HTML tags in the Task descritption.
Open the task not the workflow and there you can provide
<p> content/containers </>
You can use even <u>- Underlined text.
<h> for bold text
Thanks,
Sarayoodharan.K

How do i configure my airport to work with my other wireless router

how do i configure my airport to work with my other wireless router? I want to be able to listen to itunes through my speakers wirelessly.

Please check out the following Apple Support article for details on the many methods to use an AirPort Express for iTunes streaming.

How to set up Express as a relay wireless base station ? System: Yosemite

How to set up Express as a relay wireless station ?
OS: Yosemite.
Airport utility: 6.3.4
Base station: Extreme, connected to modem. Configured as "create a wireless network"
Remote stations: Express, connected wireless as "extend a wireless network"
Need relay station between Extreme and Express units.
Airport utility doesn't give the "relay" option.

Sorry, but Apple does not provide a "relay" option. The network can only be extended one time, not two.
Move the remote station closer to the main station, or move the main station closer to the remote station, or move both closer together.

I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

Hello all.
I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
Is anybody able to help me please.

You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

Using Airport Extreme with a Netopia Wireless Router 2247NWG

Hi, I'm trying to set up an airport extreme base station (AEBS) with a netopia wireless router and my XP SP3 Laptop. I have the extreme plugged into the router and the set up of the AEBS went fine. I have a solid green light on the AEBS and it appears to be working OK. When I move to another room in the house, I have two wireless networks available - the netopia wireless router and the AEBS. Whichever of the networks I connect to, the signal strength is extremely poor and the other is showing available with 5 bars. When I connect to the strong network, the signal goes weak and the original network is available with 5 bars. I've tried disabling the wireless on the router but this doesn't help. The router network is still showing as available with 5 bars but I can't connect to it.
First day with my MAC gear (haven't even opened the MacBook box yet) and I need help!!!!!!!!!!!

So, today I finally broke down and plugged them both into the two available ports in the back of the AEBSn via ethernet cables. My question is: Do I have to "turn off" the airport connection in order to make the ethernet connection the default connection?
That might help but it isn't necessary. You can simply rearrange the order of items in the Network preference pane.
Search on the internet and you will find many ways to check the speed. One is http://us.mcafee.com/root/speedometer/default.asp

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

How to set 'error' status with DB poll Adapter in OSB

1. Configured DB Adapter to poll rows with status 'notprocessed' and set the status to 'processed'
2. Configured FTP Adapter to write fetched rows from DB into a CSV file
Now my requirement is if any error like FTP server is not available, how to set the status in DB table to 'error'

Yes Vlad you are right, this will avoid another DB connection created in Error Handler.
I hope this will provide some lights on the usefulness of "Transaction"
http://www.nysolutionsltd.com/transaction-handling-in-oracle-service-bus/
http://kd-blog-tech.blogspot.com.au/2010/12/transaction-management-for-osb-service.html
Regards
RK
Edited by: RK.. on 27/03/2013 17:10

(Bash) How to set a variable with text from a file? [SOLVED]

I'm having a little problem.
I have textfile with a single line of text. What I want to do is set a variable with that line of text. How do I go about doing that?
A simple var="text" wont work in this case, since the text in the file changes with another script of mine.
Thanks in advance.
Last edited by Aziere (2007-03-27 09:07:03)

if you have a file with more than one line but you only want the first line you could use 'head'
VAR=`head -n 1 file`
Last edited by SiD (2007-03-27 05:58:33)

How to set new extreme with old extreme

how do I set up a gen 3 airport extreme using ethernet wire to newest extreme just bought it yesterday, not set up yet) to extend wireless network to far side of house

I am using my IMac osx 10.8 to make any changes to network and will use it to set up new AEBS,
Got it, the new AEBS will be the "main" router on the network.
where I want to put my 3 gen AEBS as a wired extender of network
Got it, the older 3rd Gen AEBS will connect to the new AEBS using a wired Ethernet connection and extend the nework.
Anyway. is this how I should set up my network to extend it with using my gen 3 APBS and with my new APBS 6h gen?
Once you have the new AEBS set up and working as your "main" router, other than making the physical Ethernet connection and typing in a device name that you want to use on the 3rd Gen AEBS, AirPort Utility will take care of all the settings for you automatically. You do not need to worry about any of this.
2nd question, if I get a new AXAC will I get better speeds or will I just get N speeds?
Not sure what you are asking. Only the new AEBS (and Time Capsule) will deliver 802.11"ac" speeds. Your 3rd Gen AEBS will deliver "n" speeds as will an AirPort Express.
3rd. can i after I set up a roaming network then use my old AX (A1264) to stream music to speakers/stereo?
Yes
will it be able to be wireless, or will the dreded Apple rule of not using 3rd repeater come into play?
Wireless
Also do you have any fixes for Roku 3 not playing well with the new APBS
Sorry, I have no "hands on" experience with any Roku products, so cannot help on that.
Suggested plan:
First, get the new AEBS set up as your new "main" router and check it out for proper operation. AirPort Utility will guide you through the setup.
Post back when you have done this and then I will provide tips on how to set up the 3rd Gen AEBS to extend the network using Ethernet. Setup is very easy if you follow the steps.
Once the 3rd Gen AEBS is setup and working, then the A1264 AirPort Express will get attention. Setup will very easy using AirPort Utility.

How to Set Default Open With?

Bridge keeps opening my .png screen shot files with Fireworks, I want them to open in Photoshop — CS4.
The .png file icons defaults are set to open with Ps.
Bridge> Preferences> File Type Associations don't even list .png (if that is the place to do it).
Forum search seems to be hitting on everything but what I am typing in.
Bridge Help doesn't understand what I am asking.

Same issue - when I double click a "RW2" file in Bridge my Photomatix application opens the file. Nowhere in the file associations do I see Photomatix or the "RW2" file format for that matter. I reset to default association - still no joy. The only app showing in the "Open With" pull down in Bridge is "Photomatix (default)". How so I change this default to PS4?

I lost my ipod touch and never set up gps how to set it up with out having my ipod

i lost my ipod touch and never set up the gps. How do i set it up with out having my ipod touch

You can't. You are SOL.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

How to set up DDNS with a BEFW11S4 wireless router

Similar Messages

Maybe you are looking for