How to set up Disco 10g in an existing 10gAS installation

============
Server has
Oracle 10gAS
Infrastructure (inlcuding OID/SSO)
Midtier (forms / reports) for 4 environments/databases
Version 10.1.2.3 Standard Edition
Oracle databases (environments)
DEV, TEST, TRAIN, UAT, OIDLDAP (for infrastructure)
============
This is a development environment that currently as no Discoverer set up.
============
I need to set up Disco 10g Viewer etc, for 4 dbs (and end user layers)
[1] Should I use the existing mid-tier, or install an additional tier exclusively for Discoverer
[2] How do I set up four Disco 10g configurations for the 4 databases (1 end user layer per database)
[3] How do I integrate Disco with SSO
Edited by: user7380263 on 20-Nov-2008 04:54

Hi Paul,
Actually, I set up a databased connect by local sqlplus. I am testing form application. no error and no data.
from sqlplus, i can user userid string in formsweb.cfg logs into database and get data by sqlplus
I think I need to set datasource in application Server inside.
I use buttom of create like
But I get message as "Commit Failed - The Transactional(XA) Location and the EJB Location are required when configuring an Emulated data source."
How to fill information in below fields:
JNDI Locations
For an emulated Data Source, please specify all three location attributes. It is recommended that you reference the EJB Location attribute in your code to look up this Data Source. For a non-emulated Data Source, the location attribute is all that is needed.
* Location
Transactional(XA) Location
EJB Location
any wrong?
Jimmy
Edited by: user589812 on Dec 3, 2008 2:50 PM

Similar Messages

How to set up the path for report in 10gAS?

I have a report which can be run in one folder A but not in the other folder B, both folder are included in the forms_path in default.env of AS. How can I set up the path for the report in AS so that the report server knows to look for the report in the folder B?

Hello,
If you don't specify the "full path name" for your reports, the file will be searched in the directories listed in REPORTS_PATH or in the directory specified in the property sourceDir
For more details :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/envvars/envvar_reports_path.htm
and
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm
Regards

How o set envoirmental settings of OAS 10g (10.1.2.0.2)?

Hi,
I am first time installing the OAS 10g (having OSS and OID) on OEL 5.5 x86 , and after that I will go to integrate it with EBS (12.0.6) with database 10g.
I have 3 machines:
1: One for oracle Application server (EBS r12 (12.0.6)) ----> Red Hat Linux 4.6 x86 ---------> Install and functioning.
2: Second for oracle database server (oracle 10g (10.2.0.3)) ---> Red Hat Linux 4.6 x86 ---------> Install and functioning.
3: Third for OAS 10g(10.1.2.0.2) with "OAS Infrastructure" and "OAS Middle Tier" (On same machine with different ORACLE_HOME). ------> OEL 5.5 x86 ------> Not Installed .
So, I had installed the "OAS Infrastructure" , but not install the "OAS Middle Tier",, and I restart the OS , after that my envoirnment is not loaded and I cannot startup the OAS services.
Please guide me about my above plan is correct or any helpful suggessions from ur side, I will appretiate in advance?
Please also guide me how to set the envoirnmental setting for OAS?
Thanks.

export STAGE_PATH=............
export INFRA_INSTANCE=............
export BIF_INSTANCE=................
export ORACLE_BASE=/suo1/oracle/.....
export ORACLE_HOME=/su01oracle/infra.......
export ORACLE_SID=iasdb
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/local/lib
export DISPLAY=............
PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/Apache/Apache/bin
PATH=$PATH:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin
export PATH

How to Set a page as home page in Oracle portal 10g

Hi,
I have one doubt.
How to set a page (Not Page group) as home page in Oracle portal 10g?
whether it should be a HTML Portlet or some other?
Thanks & Regards
Suthan.Sathya

Hi,
Welcome to SDN
By defining the Sort Sequence of Navigation Nodes, you can do this, check the links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/53/89503ede925441e10000000a114084/frameset.htm
If you need more help, just ping back.
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

How to set the debug port for Eclipse for OracleAS 10g Enterprise

Hello All,
I am using OracleAS 10g Enterprise, and using dcmctl to startup the server.
But i do not know how to set the debug port in the startup script for debugging with Eclipse.
I have tried to add the following options to the dcmctl.bat, but still failed:
-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=4000
i.e in the dcmctl.bat script:
set jvmargs=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=4000
set ex=%ohome%\jdk\bin\java -Djava.net.preferIPv4Stack=true %jvmargs%
Do anyone know how to configure the debug port setting?
Thank you for your great help!.

Hi, have you double checked that your oc4j is started with Sun's JVM or any other JVM that recognizes the kind of remote debug option as above? You can find the JVM used by oc4j in the ORACL_HOME/opmn/conf/opmn.xml.
To double check that your oc4j is started in debug mode, you can test with another remote debugger. Say, with the jdb in sun's jdk jdb -connect com.sun.jdi.SocketAttach:hostname=yourHost,port=4000 (Personally, I also use Jdeveloper or Jswat to double check.) If you can connect with jdb, then you have to check your Eclipse. Can its remote debugger connect to any java application at all?

EM 10g Release 3 Grid - how to set up thresholds/notifications

Hello --
We have installed EM 10g Release Grid control and I would like to set up all the necessary thresholds and notifications. I would like to set those up for one instance only. So I went to Preferences --> Notification Rules and set up (what I thought) notifications for this one database. However, I keep getting alerts for ALL databases. Is there a way to set this up just for one?
Also, on the home page in the Related Links section I see the following links related to metrics:
Metric Collection Errors
All Metrics
Metric and Policy Settings
Metric Baselines
User-defined metrics
What are Metric Baselines? How do set those up? Are these also "global" - if I modify those it will affect all of the databases? Is there a quide (like a miniumum) on thresholds - how do you decide on the values? Any insight on this would be greatly appreciated.

Yes it is easy to be confused. Maybe this will help -
1) Notification Rules are set to provide you notification when a metric and policy setting is in warning, critical or clear status - (side note here is that clear is clear for warning and clear for critical- so if you set notification to page on clear you can get warning clear and critical clear pages)
2) Metric and Policy Settings establish warning and critical thresholds - you dont have to have notifications on them.
3) Baselines can be taken on the live database to establish normal operating thresholds. I am a little weak in the Baseline Space.

How to set event trace in 10g

Hi,
How to set event in oracle 10g, its 11i apps.
Support says that we have to set
To help confirm the analysis if related to\bug can you put in an errorstack forever
on 1426 and 6502.
eg: event="1426 trace name errorstack forever, level 3"
event="6502 trace name errorstack forever, level 3"
Also immediately after the error see if you can run below statement:"
Do i need set this event parameters in init.SID.ora, Please let me know

Danny,
It depends on the level of trace you want to enable. Also, please note you can set the same at the session level, so it depends on what issue you have. If this is a database generic issue, then set it in the init.ora file and bounce the database. If it is a client/session issue, set it at the session level -- See Note: 218105.1
Since the support suggested something specific, then just follow their suggestion.
Regards,
Hussein

How set the oracle 10g path in xp environment variables

am new to java.
am practicing the jdbc, but while running the program it compied, but it does not execute the program.
it says
package oracle.jdbc.driver does not exist
DriverManager.getregister(new oracle.jdbc.driver.OracleDriver());
then how to set the path of oracle 10g in xp environment variables.
plz send any body the answer.
its urgent.

tster wrote:
sunnyyld wrote:
then how to set the path of oracle 10g in xp environment variables.right click on my computer -> properties -> advanced -> environment variables.
Not that it would work, as the kid doesn't seem to understand what exactly it's doing wrong.
Had it worked through some basic tutorials it would have understood so I'm not going to tell it, just tell it to work through some basic tutorials.

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

How to set Email Body in srw.add_parameter(myPlist,'MESSAGE'....

Hi, i have created following procedure to send email using event driven Publishing API,
it works fine, i have using "message" and "body" in add_parameter ,but it send email with no body/message,blank email body.
Please help out how to set email body....
im using
- AS 10g(10.1.2)
- Windows Server 2003
--procedure
CREATE OR REPLACE PROCEDURE testemail
is
myPlist SRW_PARAMLIST;
myIdent SRW.Job_Ident;
myStatus SRW.Status_Record;
BEGIN
--srw.start_debugging;
myPlist := SRW_PARAMLIST(SRW_PARAMETER('',''));
srw.add_parameter(myPlist,'GATEWAY','http://myserver:7778/reports/rwservlet');
srw.add_parameter(myPlist,'SERVER','myrepserver');
srw.add_parameter(myPlist,'REPORT','D:\Reports\abc.rdf');
srw.add_parameter(myPlist,'USERID','abc/xyz@mydb');
srw.add_parameter(myPlist,'DESTYPE','mail');
srw.add_parameter(myPlist,'DESFORMAT','PDF');
srw.add_parameter(myPlist,'DESNAME','[email protected]');
srw.add_parameter(myPlist,'SUBJECT','Test Mail');
srw.add_parameter(myPlist,'MESSAGE','This is test email');
srw.add_parameter(myPlist,'FROM','[email protected]');
myIdent := srw.run_report(myPlist);
myStatus := srw.report_status(myIdent);
--srw.stop_debugging;
end;
/

1. Current work flow :-In web site the user have to register themselves in the web site and enters his details along with user id, password and email id. Once user
is registered then he will login with his user id and password. The user id is picked from login control and that set in “SPWeb.CurrentUser” as user id and system uses "Membership.ValidateUser" method to Authenticate user for login.
2. New Requirement: we would like to facilitate the user to login with Email id as well as user id.
Problem:
We replaced "Membership.ValidateUser" method to our own method to Authenticate user with email id/user id and password.
When user is login with user id and password it is working successfully but in the case of email id and password –“the email id is picked from user control and set as
"HttpContext.Current.User.Identity.Name" but we are not getting “SPWeb.CurrentUser” and it shows null value.”
We are able to get user id from database using email id of user. Please help us how we can set user id in "SPContext.Current.Web.CurrentUser".
Mohan Prakash

How to do something in 10g that I did in 3.0.9?

I am proficient in 309, but skipped over Rel 2 and am now trying to work with 10g.
I had an easy set of steps for making pages for different departments on our 309-based intranet:
- made new content area for department
- made folders under new content area
- made new content area page for new content area
- altered the default nav bar of the CA to include folder links to provide navigation within the department.
... Result was a great, simple department page with same nav bar across folders. When clicking on folder links w/in this navbar, the only change was the new folder was displayed. Navbar, header,portlets all stayed the same otherwise.
How do I do this in 10g? TEmplates?

hi,
this same task is still as simple in OracleAS Portal 10g as it was in 3.0.9. The architecture of Portal and Application Server changed completely so that also the terminology changed for objects in portal.
Content Area now maps to Page Groups and Folders now map to sub-pages in this page group.
You will find loads of information on how to work with Portal 10g on OTN: http://portalcenter.oracle.com.
Specially the Documentation page offers a lot of help when starting with 10g: e.g. the Getting Started Tour and the Users Guide.
http://www.oracle.com/technology/products/ias/portal/documentation.html
To give you an idea of your specific requirements:
Create a new page group (CA) as the container of your department pages. Now create sub-pages (Folders). Those sub-pages are split into regions. A region can contain items or portlets. A region can also display the sub-pages (folder structure) - edit the region to configure this. You can base your pages on templates to give a page a certain structure and style (corporate standards).
If you have a specific question let us know.
regards,
Christian

Status Agent Not Reachable - How to set a fix port number?

My EM 10g was working fine http://localhost:5500/em
Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
I had even installed another DB called REPOS other than the default ORCL.
All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
Thanks in advance.

Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
I did not uninstall the db.
Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
Everything is on my local machine.
Following is from the portlist
Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (orcl) = 5500
Enterprise Manager Agent Port (orcl) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Enterprise Manager Console HTTP Port (ORCL) = 5502
Enterprise Manager Agent Port (ORCL) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

How to set the option Bit-mapped indexes to true ?

Hi,
I a not a an Oracle Administrator. Usually, I just use Oracle as developper. I have got a Oracle 10g database. I can not import data in my database because the Bit-mapped options is not set.
When I type
select banner from v$version
I get this result :
BANNER
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
I run the import and I get this error :
IMP-00017: following statement failed with ORACLE error 439:
"CREATE BITMAP INDEX "ID_ACC_DO" ON "ES_AUDIT_CONNEXION_ARCH" ("DATE_OUVERTU"
"RE" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 33554432 FREELIST"
"S 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "IND_XL" LOGGING"
IMP-00003: ORACLE error 439 encountered
ORA-00439: feature not enabled: Bit-mapped indexes
I typed the command :
SELECT * FROM V$OPTION WHERE PARAMETER LIKE 'Bit-mapped%';
I get the result :
PARAMETER
VALUE
Bit-mapped indexes
FALSE
How to set this parameter to true ?
Best regards,
Xavier

I beleiev that you are on Standard Edition.Bitmap indexes can be used only when you are working with Enterprise edition.
SQL> select * from V$option where parameter like '%Bit%';
PARAMETER
VALUE
Bit-mapped indexes
TRUE
SQL> select * from V$version;
BANNER
Oracle Database 11g *Enterprise Edition* Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL>I guess you see the entry coming of Enterprise Edition in my banner.This is missing in your V$version, so you are using Standard Edition install.
You need to move to Enterprise edition to use Bitmap Indexes.
HTH
Aman....
Edited by: Aman.... on Dec 11, 2008 3:09 PM
added a little more.

How to set the default button of an ALERT

Can someone help me how to set the alert propety to change the default button from button1 to button2.Not from the prioperty palette, but inside the code using like set_alert_property.I am using the Oracle Forms 10g.
Thanks in advance.
Srini

To the best of my knowledge, the default button cannot be set at runtime. This must be set at design time in the Builder.
Refer to the Forms Builder online help for details:
http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builts/setatpro.html

How to set up Disco 10g in an existing 10gAS installation

Similar Messages

Maybe you are looking for