How to set up email access on N95 8GB?

Hi
I have an N95 8GB.
I have recently added a data bolt on for accessing work email from my phone and would like to receive a text/message when I receive a new email.
Problem is I can't find any information on how to set this up.
This link looked perfect:
http://www.knowyourmobile.com/nokia/nokian95/nokia​n95internet/2533/setting_up_email_on_the_nokia_n95​...
but  following it through on my phone doesn't come up with the same options etc.
So far I have gone to 'messaging', selected 'change me', then - Options - Email Settings - Connection Settings - Incoming e-mail.
Here I am stuck.
Is my username my email address?
Is my password my email account password?
What is my incoming mail server?
What is my access point in use?
What setting should security ports be on?
The settings also say that I cannot have email notifications and email retrieval together. What does this mean?
I would really appreciate it if anyone out there can help.
Thank you

Hi, I'm a newbie at this, so pls be patient with my terminology...  I want to install 2 or 3 of these cameras in my mother's home, and I will have AT&T DSL service (one dynamic IP address) there with only a modem/wireless router.  I want to access the cameras from my laptop or from my Blackberry Tour when I am traveling.  Also want to allow access for my other relatives.  I do not have another home computer to serve as a WHS, and my laptop is obviously not connected to the internet all of the time.  Can I use the DDNS setup with DynDNS to provide access?  The instructions that I read seemed to imply that I needed a WHS in order to forward ports, etc.  Thanks in advance for your help.. Garry

Similar Messages

  • Setting up email on Nokia n95 8gb

    Can anyone help with my problem. I have an ntl email account which I have set up on my nokia n95 8gb. I am on the vodafone network. I can send email no problem but I cannot receive them on my mobile. I have asked vodafone for help but got no where. They suggested I go to nokia website and use advance settings to configure my phone for ntl email to be set up which I have done. But because i still could't receive emails they then told me to take it to a vodafone store for them to look at which I did, they altered the settings but the problem not able to receive emails is still there. I keep getting asked for my user name and password over and over after I click ok. I have checked they are correct numerous times. Vodafone says its a problem that lies with the nokia handset and ntl !! If the ntl server isn't compatible with the handset how come I can send emails but not receive and how come nokia website gave me a code to configure my phone to set up ntl email using vodafone network. Any advice would be appreciated.
    Solved!
    Go to Solution.

    Dear Eve,
    With great interest I read your post about your email issue with your Nokia N95. Could you help me out by checking the following link to see if this has to do with your problem...? I would like to thank you for any effort beforehand.
    /discussions/board/message?board.id=smartphones&me​ssage.id=97611#M97611
    Best regards,
    Fernao

  • NEED info on How to Set Router to access just one website???

    Ok here we go again, Finally found out it's my Linksys not letting me onto one website..I had a 310N and thought that was the problem so went out and bought a 610N ..same darn thing just won't let me access one website I need to sell my goods for income. I remove linksys from my modem and plug it directly into one of my computers and I got the website..Yes it's a Linksys problem !!!
    I need some info on how to set up a access point in my router's setting to let me log on to this website www.denofangels or http://74.86.166.210/
    Is it time for me to call the support team??????????????
    I'm running XP on my computers, have 3 of the 4 computers using wirelessN adapters and on the main computer is the WRT 610
    Help Please ....linksysDoll
    Gone Nutz trying to figure out Linksys again!!

    MY Internet provider is Time Warner / Roadrunner cable..Does this help you to solve my problem. Nothing wrong with the modem..just my wrt 610N settings, I'm guessing it carried over from my wrt 310N..this was working fine until a couple of months ago and then nothing for this one website.
    I'm running XP
    Thank you in advance for any help or info
    Gone Nutz trying to figure out Linksys again!!

  • How to set up email?

    I just got finished wiping my device because it had a previous owner. And I don't know how to set my yahoo account so I can get it on my phone. I have a curve 8310. Thanks for any help.:smileyhappy: 

    Do you have the BlackBerry Data Plan on your carrier account?
    If not, you will need that.
    Then, you will see an icon appear on the screen for "personal email setup".
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to set up Email in S60v3/5/^3 and bypass the N...

    There are many threads on this board that all say the same thing and usually are about how Nokia Messaging or email is not working or syncing.
    In an effort to have a base-line to assist with these, I have made the following tutorial to help users to bypass the Nokia Messaging (NM) as it is the auto-default to set up email on Nokia devices.
    NM allows for “push” email, which will not keep you constantly online and will allow for marking your server email with what you have on your device.  Ie-if it is read on the device, it will be marked as read on the server, deleted, then deleted, etc. 
    When you bypass the NM, you will lose the “push” but you can setup most email as an IMAP4 which will do the same thing, and you can select what folders to sync, and how often to have them sync, not keeping you online.
    This tutorial was done on a Symbian s60v5 device, and while some of the dialog may be different among devices, the process is relatively the same when bypassing NM.
    Open the email client, select options
    Select Settings
    Select E-mail
    Select Mailboxes
    Options
    New mailbox
    E-mal wizard will show up, tap Start
    Next screen, Preparing for installation:
    If asked, allow to use network.  It will default to network to allow for set-up of NM.
    If first time setting up email, this screen will show, “Welcome to E-mail setup”  after you have done it once, it may not show up.  Tap Start.
    Enter E-mail address, then tap OK
    Splash screen
    Enter Password, then tap Ok.
    Splash screen
    This is the screen where you can choose between the NM and the internal email client.  Aka, Terms of Service (on some devices you have to “agree”) (aka-TOS).  The default  is Yes! Activate my Nokia Messaging account, and if you have already set one up, it will say, “Add to my Nokia Messaging account.
    You need to select “No Thanks.  I’ll check for new messages manually.” Or “Create a separate account that uses manual delivery.
    Splash screen
    Confirmation screen. Select Ok.
    Your new mailbox may not show up in the next screen which is supposed to show all the mailboxes set up.  It is a slight glitch in some phones.  Just tap the back button and then mailboxes, then you should see it set-up in the mailboxes as shown.  Highlight your new mailbox and then select options to setup the settings of the email address. 
    You will need your inbound and outbound server settings and ports and securities if needed.  You should be able to google for the various email types and if it is a company email, you should be able to get this information from your system admins.
    The following are just some screen shots so that you can see the process to follow.  While the NM will sync and mark messages as read the same in the inbox, if you set up your email as an IMAP4, it will do the same and sync all the folders on the server as well.  There is an option to for how frequent you would like your email to auto-sync, just as with the NM.  AND what days you would like it to work!
    As there are older, the same, and newer versions of the Symbian and NM, this should help many people as least have the right guidance to bypass it if they wish and get on with consistent email service without using the NM.

    I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong. 
    I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't 
    I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

  • How to set up email in RAID Admin?

    Using RAID Admin 1.5.1, I need to know how to set up the it up for automatic email notification. Okay I got as far as clicking the Email icon adding my .mac address. Now what do I put under SMTP. It's asking for the "server" and the "from email address". Our company uses a Microsoft Exchange server whether or not that means anything. And what is up with the check box for SMTP Server Authentication?
    Thanks for any input. I appreciate it!
    jeffrey

    Thanks Donald for answering my question. I found the IP Address of our exchange server and I plugged that into the server field. And I plugged my own company email address into the "From Email Address" field. That didn't do it, so I plugged in my network username and password into the authentication fields. I clicked "Send Test Email" again. Still didn't work. But here is the key in case anyone else has problems. At least in my case, I had to click the "OK" button to verify my settings. Once verified, I went back into the email settings and clicked "Send Test Email" again. Voila! A test email ended into my .mac email account right onto my iPhone within 1 minute. I think this is so cool. I can be away from the office (whether I be skiing or golfing) and be notified instantly if one of the components start to fail on our Xserve RAID system. Awesome!!!!!!!

  • How to set up email account for 9360

    Hello,
    I have problem on setting up my email account.. I have a hotmail account but I can't access it through my blackberry.At first I tried to set it up via set up-email account etc but I couldn't. Then I opened my browser, clicked on communication and then integrate hotmail but the stage doesn't''t open at all.It appears the message unknown error, please try again. Can anyone help me???

    Hi and Welcome to the Community!
    It's a pity that all we have to go on is "but I couldn't"...error messages and step by step of what you try and what happens can be much more helpful in diagnosis. But, from what you describe, it sounds like you don't have an adequate BB-level data plan from your mobile service provider...so I recommend you ring them up (vodafone, according to your profile entry here) to sort this out.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to set up email notification

    Hi,
    How can I set up email notification in AV 10.2.3? I have gone through the admin and auditor docs but could not find any mention of it. Was not able to find the navigation on the AV console either. Someone posted a documentation URL link in the forum back in 2007 but unfortunately the link was broken. Can someone direct me to the email configuration page?
    Thanks.

    E-mail notification is not available as a feature in Audit Vault 10.2.3.1, the latest version available.
    However, it is possible to set up e-mail notification for alerts with some coding. Each alert raised by Audit Vault is placed on a queue in the repository. This is a standard Oracle Advanced Queue, and can be subscribed to using AQ APIs in PL/SQL or, with the JMS adapter, in Java. Once a subscriber is up and running, it will pick up any alerts that are raised and can route them to e-mail if needed.
    Sample code to do exactly this is provided in $ORACLE_HOME/av/demo/alert on the AV server.

  • How to set owner-only access file permissions both on Linux and Windows

    Hi everybody.
    I have the following problem. I need to store some private user information in file system. So I need to set owner-only access permissions for some directory in user home. I did not find API for doing this. As I understand this is platform specific thing. Could anybody tell me how can I do this both on Linux and Windows?
    Thank you in advance.

    More ideas just came back to me (of something I did before)
    Each OS requires a different control.
    For Windows you will need to set the .policy file for each user (a pain if you have more than a dozen of clients) granting access (R or RW) to files/directories.
    Then you have to write some native code (access via JNI) to access/modify your authorization.
    A more professional solution that I used was J-Integra (other similar tool exist).
    Basically it is a bridge between Java and COM. It magically give you access to the COM API from Java (and vice versa).
    In my case it was to read/write/modify Winword documents transfered between PC and server.
    From memory you have to run the com2java.exe to build the bridge (classes in Java language) between the 2 families. Compile those classes and you have a "driver" for the COM (Microsoft Objects).
    Here I must confess my ignorance on Microsoft.
    Those COM objets must give you some easy/integrated access to the API for LDAP or Microsoft Active Directory Service (for centralize control with more complex setup).

  • Step by step on how to set up email as output type

    Hello everyone,
    can someone pls help me with the configuration and the steps I have to do to set up email as output type for order confirmation, delivery and shipping. Also can you tell me the programs and forms I have to select from in the condition type. Do I need to get the ABAP guys involved and what do I ask of them, how finally is it interfaced with the email. Please give me step by step for the configuration and any other set up I have to do. I am working on ECC 6.0 and I need all the help I can get.
    Thanks

    Hi,
    Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
    http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
    I hope it will help you,
    Thanks,
    Raja

  • How to set push email on iPhone 6 plus (both on main email and alias) ?

    I already have gmail account which one was my main email and another one was my alias. I try to set push email on my iPhone 6plus but anyway  it's work only for my main account. How do I set it for my alias account.
    I try to set push email with other hotmail accounts. Both of it can set push email.
    Or the problem may cause from imap . gmail .com ?
    Please help

    I use google app for business which is not a free account. Is there any possible paid gmail account can set push on iOS application instead of gmail app?.

  • Problem with One Touch Access for N95 8GB

    Hi,
    I'm having problem connecting my N95 8GB to the Internet via NSeries One Touch Access PC Suite using my Bluetooth. I can connect via cable but bluetooth I cannot.
    This is the error message giving me:
    "Failed to connect to the network! One Touch Access could not connect to the selected device."
    Pls help and advise. Tnx in advance.
    Br,
    PeteMessage Edited by pmpinguel on 24-Nov-200712:31 PM

    I found a situation where your error message appears. It is the case when the nokia is connected using the data transfer mode and simultaneously the OneTouch Application is started. Then the device is not recognized by the modem software. The PC Suite mode is required for the OneTouch Application.
    In my situation I think I already saw all of the possible error messages described in the documentation during the various experiments.
    For example I tried to uninstall and reinstall the cable drivers. Unfortunately the driver page of N95 8GB does not include them only the page of N95. This was a step towards success - what concerns the OneTouch Application.
    Sometimes it is useful to switch off and on the phone, specially when it is not possible to connect with the modem driver.
    In my opinion the possibility of completly uninstalling the Nokia Suite is missing. You can uninstall all parts but after reinstallation the Nokia Phone Browser is no more available, the icon is not displayed. All the software packages are working fine even the modem drivers but not the Phone Browser.
    Franz

  • HOW TO SET UP EMAIL TO YOUR BLACKBERRY

    ProcedureTo set up your BlackBerry Internet Service or BlackBerry mail and messaging account, complete one of the following procedures:
    Create the BlackBerry Internet, BlackBerry mail and messaging, or BlackBerry Mail account from your BlackBerry smartphone
    Create the BlackBerry Internet, BlackBerry mail and messaging, or BlackBerry Mail account from your computer
    To set up your  BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail account from your BlackBerry smartphone
    You can set up your account from your BlackBerry smartphone or from your computer.
    Note (new BlackBerry Internet Service users only): New BlackBerry Internet Service, BlackBerry mail and messaging, and BlackBerry Mail subscribers can create their accounts on their BlackBerry smartphones without having to create a login user name and password to access their accounts. For more information on Automatic Login, see KB13955.
    To set up your BlackBerry Interent Service or BlackBerry mail and messaging account from your BlackBerry smartphone
    Verify your BlackBerry smartphone is connected to the wireless network. For information about network status indicators, see KB02334.
    Click E-mail Settings.
    Read the Legal Terms and Conditions carefully.
    Select Yes, indicating you have read and understood the Legal Terms and Conditions.
    Click I Agree, to be bound by the Legal Terms and Conditions to continue with the setup process.
    Note: The BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail account is now configured.
    Complete the appropriate steps to begin sending and receiving email messages.
    Add an existing personal or work email address
    Create a BlackBerry email address
    Add an existing personal or work email address
    On the Email Account Setup screen, enter your existing personal or work email address and password. Click Next.
    You will receive a successfully configured access to your email account message. Click OK. The Services - Email Account screen appears.
    The Services - Email Account screen provides an overview of the following:
    Integrated email addresses
    Add An Email Account option - allows the subscriber to integrate third-party email accounts
    Services and Settings - designed to allow subscribers to manage their BlackBerry Internet Service accounts, including sending service books and changing the language
    Help - provides online help
    End User Agreement
    Create a BlackBerry email address
    On the Create a BlackBerry Email Address screen, enter a user name, password and confirm password, secret question and secret answer.
    Click OK.
    You will receive a successfully configured access to your email account message. Click OK. The Services - Email Account screen appears.
    From the Service - Email Account screen, you may edit or delete each email addresses, integrate another email account or go to the Service and Settings screen.
    To set up your BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail account from your computer
    Note: New subscribers who create their BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail accounts from the computer and create a login user name and password to access their BlackBerry Internet Service account will turn off the Automatic login feature. For more information on Automatic Login, see KB13955.
    Perform a Register Now operation on the BlackBerry smartphone. For instructions, see KB00510.
    Navigate to your wireless service provider's BlackBerry Internet Service account page.Note: To find your service provider's BlackBerry Internet Service web site, go to the Support section on the BlackBerry web site (http://na.blackberry.com/eng/support/software/internet.jsp) and click the link for your service provider in the Accessing the BlackBerry Internet Service Website section.
    Click Create New Account.
    Read the BlackBerry Internet Service End User Agreement, and place a check mark in the box labeled I have read and understand the Legal Terms and Conditions. Click I Agree.
    Type the personal information number (PIN) and International Mobile Equipment Identity (IMEI) or electronic serial number (ESN) for your BlackBerry smartphone, and click Continue.Note: For instructions on how to locate the PIN, IMEI or ESN on your BlackBerry smartphone, see KB05026.
    Type a user name and password, and click Next.
    If the user name chosen has already been taken by another BlackBerry Internet Service subscriber, you must choose a different user name. Suggestions for user names that have not yet been taken will be provided. Once you have chosen an alternative, click Next.
    Your BlackBerry Internet Service account is now set up. You may begin adding email accounts or create a BlackBerry email address.
    Additional InfoFor a list of helpful articles and links regarding the BlackBerry Internet Service, visit BlackBerry Internet Service.
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

    I have registered my email and selected a blackberry email as well.  I had to go online to Tmobile and register my email as I only have 2 options at the "add email" screen.
    1) I want to use a work email account.
    2) I want to skip email setup.
    I do not have the option here for adding my own email.
    I have yet to receive email to my phone. 
    While at the Tmobile store, the rep registered my phone so I could get the email accounts set up.  When I look at my account online, I see the emails I have added to the account.
    I get no emails.  I sent one to my blackberry account, but still no emails.
    I had a pearl that I borrowed last year and it was no problem.  Actually got too many emails.  Now I get none, only text messages. 
    Suggestions?

  • How to set up email, add apps, use web through wireless modem?

    Hi,
    Have a new 8310. OS is v4.5.0.37 Platform 2.7.0.55I'm in Australia, currently with Telstra but in the process of changing.
    I have not purchased a data plan for the phone. I have a wireless modem for my desktop & wondering if I can use this to connect my phone to the web without purchasing data?
    Do I need a data plan to send emails? Can I use my existing online email acct(yahoo), or do I need to set up a special one for the phone? If so, please explain where/how? If not, what other info do I need to configure the existing one? It seems I need a PIN as well as e-addy & password(& assuming it's the yahoo password?)
    TIA
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    Some useful reading:
    http://na.blackberry.com/eng/support/blackberry101/
    http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
    loosie wrote:
     I have a wireless modem for my desktop & wondering if I can use this to connect my phone to the
    No
    loosie wrote:
    I have not purchased a data plan for the phone.
    Do I need a data plan to send emails?
    Yes. Basically, to do anything other than use the phone, you need a data plan. Period.
    loosie wrote:
     Can I use my existing online email acct(yahoo),
    Yes...see the above reading material.
    loosie wrote:
      or do I need to set up a special one for the phone?
    No...not required.
    loosie wrote:
     It seems I need a PIN as well as e-addy & password(& assuming it's the yahoo password?)
    PIN...hmmm...there are many definitions for that acronym in the BB world. The most usual one is a unique identifier, much like an IP address or phone number, that is assigned at the factory to your BB. It is used to register your BB for various services (yes, via a data plan) so as to identify your BB on the network.
    I hope that helps.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to set default email address for input

    G'day all
    Summary: I'm sick, it's difficult to type, and a combination of autocorrect, default Shift key settings for input fields and my iPad completely ignoring my default email account is making it laborious to input my email address. Help!
    (Edit: I had a micro-brainwave and checked my "Me" card in Contacts, since I have Safari set to autofill from that card. My default email address is not listed first in the card. I've now put it on top, Gmail second and "me.com" last. I'll comment later on if I see this help with point 3 below.)
    Details:
    I love my shiny new iPad2. I really do. But autocorrect is driving me crrrrrazy when I try to input my email address.
    Typing in general is an issue for me, because I am disabled and have difficulties with coordination and movement. On my laptop (MacBook Pro mid 2009), I used TextExpander. It lets you set an abbreviation for any text, so you can just type that abbreviation instead of the whole thing, and TextExpander automagically inputs the whole thing for you.
    I have a long email address, because my ISP has quite a long domain name. So only typing 4 characters (my abbreviation) instead of the whole 23 characters was a big help for me.
    Enter the iPad.
    I need to use the iPad now, because my laptop is now too heavy for my legs (and I do occasionally need a full-on laptop, so the MacBook Air isn't the solution). The iPad in general has been great for me. The simplification of the interface (while annoying at times, e.g. not being able to view full headers in an email) saves brain cycles, so I can read for longer.
    However, where on my laptop I only needed to input 4 chars for my email address, on my iPad I have to input the whole 23 chars. How many places online are you asked to input your email address? Way too many. Safari may eventually catch up and record some of them, but currrently, I'm using too much of my day's energy just on trying to input my email address. (Note: this post is written on my laptop, so I can use my abbreviations.)
    TextExpander is available for iOS, but due to Apple's current refusal to allow integration with its apps, TextExpander isn't allowed to input stuff directly. Just like with the indispensable password program 1Password, you have to switch from Safari to the other app., search for and select and copy the text you want, then switch back to Safari, select the field and press Paste.
    Grrr.
    I may get desperate enough to go through those steps each time, if things don't improve with my email address. My problems are:
    1. Very few email-address fields in webpages currently have the appropriate settings to instruct the iPad keyboard not to start with the Shift key down. This means every time you try to input your email address, it will start with an upper-case letter.
    Half the time I don't notice until I've got part-way through typing my address, so I have to delete all those chars and start again. About a quarter of the time, after deleting, I don't notice that the Shift key has been activated again, so I go through the whole process again.
    2. Even when the email-address field turns off the Shift key, or when I remember to do it myself before entering text, autocorrect will insist on changing the first letter back to upper-case, because my username is also my first name. Cue more deleting and getting confused.
    3. This is the big one: once my username is up there, autocorrect insists on entering my "me.com" email address. This is the email address I use least. When I laboriously (again) delete this text and start again, it will either insist again on "me.com", or input my Gmail address. That is the email address I use second least. Autocorrect never inputs my main email address, set as my default account in the Mail-Con-Cal Settings. (This is a POP-only account.)
    4. Even if I do manage to input my whole email address correctly, autocorrect will insist on capitalizing the first letter of the domain name (which is also a location). Cue yet more deletion and retyping.
    Are there any ways to avoid wasting so much energy on trying to input my email address?
    Is there any way to set the default input email address? Or to tell the iPad/Safari that an email address field doesn't require the Shift key?
    I've had my iPad for nearly three months now, using it for my day-to-day activities, and I've been hoping this problem would gradually go away, that the software would finally catch on to my main email address (from the default account) which I have input over and over (and OVER) into email-address fields.
    Evidently not.
    Any ideas?
    Thanks in advance for any help you can offer.

    As Roosevelt suggested, you can turn off Auto Correction in the keyboard settings. Go to Settings>General>Keyboard>Auto Correction>Off.
    This will also turn off spell check (unfortunately) and there is no fix for that. Auto Caps can also be turned off as well and so can the keyboard shortcut for the space/period. Frankly, all of these features drive me nuts and I wish the iOS allowed for more control, but it does not.
    As fars as typing your email address, be aware that even if you type your email address in all caps it still works. So if Autofill insists on capitalizing the first letter in your name in the email address - and it will insist on doing so - you can just let it go as is and it will still work. Doesn't really get to the heart of the matter but it would save you the laborious deleting and retyping.
    Having said that, when the Auto Correction suggests a word or wants to set a capital latter, you can tap the "x" in the pop up suggestion to ignore that word, cap, whatever. The dictionary is then supposed to "learn" your word if you refuse that suggested word enough times. This is another feature that seems to have a mind of it's own at times since sometimes it may take more than a few attempts to get the Auto Correct to not come up and instead allow your chosen word to be freely typed as desired.
    Lastly, with regard to your correct email address popping up, that is another case of if repeated time and time again, It should be another case of the iOS "learning" through repetition that your default email should popup when you begin entering the address.
    You could try to rectify all of this by resetting all of your settings and clearing Autofill but you would be starting all over again which is something I think you would rather avoid.
    Settings>General>Reset>Reset All Settings
    Settings>General>Reset>Reset Keyboard Dictionary
    Settings>Safari>Autofill -tap names and passwords>Clear all
    As Roosevelt suggested, submit feedback, and I hope you find some resolution to this.
    Quick Note - I originally typed this post on my iPad and when I read a few of the words that were substituted by auto correct - I quickly turned to my iMac to change the words. I do feel your pain with regard to auto Correct!
    Message was edited by: Demo

Maybe you are looking for

  • About Smartform as PDF

    hi, all   I want to display the smartforms as pdf in web dynpro abap, bu there are error at runtime. Source code: method DISPLAYFORM .   data : l_x(1) value 'X'.   data: lv_text type char3,   lv_syucomm type char1,   ls_pdf type xstring,   lv_fm_name

  • Delta Skymiles AMEX Gold Approved with Bankruptcy!!

    Just got an instant approval online!!  Credit line is $2,000.  I have applied about 4 times for this card over the past few years, declined each time.  They checked Experian my Fico score is 664 and I have 30+ inquires (i'm a credit junkie too...I ha

  • Extracting embedded thumbnails from JPEG

    Hello, I need to extract and display the thumbnails that are embedded in JPEG files. Does anybody know how to do that with Java 1.3.1? Thanks, Stan

  • Applet, Packages and archives

    Dear all, I am having problems getting an applet to fire up when I place it on the web server (it runs fine from local file system). I have a single archive (MDE_new_demo.jar) that has multiple files in multiple packages. The main class is org.csiro.

  • Need simple code...

    Hello experts, I am currently having trouble modifying a report. In the part of the report that I am modifying, it is inside a loop and it gets vbelv and posnv from vbfa comparing it to mseg-mblnr and zeile respectively. now, I cannot use at new stat