How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

Hello,
I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.
I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
How can implement this for this sending outgoing faxes as well?
I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server.
Any help is appreciated. Thanks!

Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
The article is so easy to understand with detail procedure and guideliness
Exchange Queries

Similar Messages

How to check DFS replication status in windows 2008 r2 file server

Hi,
I have created File server DFS namespace between 2 windows 2008 R2 server. namespace mode is 2008. I have copied 3 TB data on file server 1. now it is getting replicated from file server 1 to file server 2. till now the data is not fully replicated.
My question is how can I check the status of DFS replication? how will I come to know that the initial replication is completed.

Scorpio. Yes you are right. Microsoft officially says it will not work. My apologies. Thanks for the correction.
Do Ultrasound and Sonar work with DFS Replication?
No. DFS Replication has its own set of monitoring and diagnostics tools. Ultrasound and Sonar are only capable of monitoring FRS.
Is there a way to know the state of replication?
Yes. There are a number of ways to monitor replication:
DFS Replication has a management pack for System Center Operations Manager 2007 that provides proactive monitoring.
DFS Replication has an in-box diagnostic report for the replication backlog, replication efficiency, and the number of files and folders in a given replication group.
Dfsrdiag.exe is a command-line tool that can generate a backlog count or trigger a propagation test. Both show the state of replication. Propagation shows you if files are being replicated to all nodes. Backlog shows you how many files still need to replicate
before two computers are in sync. The backlog count is the number of updates that a replication group member has not processed. On computers running Windows Server 2008 R2, Dfsrdiag.exe can also display the updates that DFS Replication is currently
replicating.
Scripts can use WMI to collect backlog information—manually or through MOM.
Miguel Fra /
Falcon IT Services
Computer & Network Support, Miami, FL
Visit our Knowledgebase and Support Sharepoint Site

How to activate Windows 8.1 on a Windows 2008 R2 KMS server when I don't have Windows 2012 R2 kms host key

I only have windows 8.1 kms host key but I can't add a client OS kms key to Windows 2008 R2 kms server. And I don't have Windows 2012 R2 license either. Is there any way I can activate Windows 8.1 using my existing kms server? Thanks.

I would like a yes no clarification answer. So does this mean that EVEN WITH THE PATCH. My Server 2012 Standard edition that currently hosts KMS VA for clients running Win7, Win 8, Office15, Server 2008, Server 2012. Will not be able to host windows 8.1?
I will have to install 8.1 and use as a host?
if you have a KMShost product key for WS2012R2, you can patch a down=level Server and be fine.
(the OP didn't renew SA or otherwise has no KMShost pkey for WS2012R2)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
I'm having similar issues and have a similar question that doesn't seem to be answered:
My KMS server is Windows 2008 R2 (Also is my domain controller). I want to activate Windows 2012 R2 and Windows 8.1 machines off this KMS server. I can install the 2012 R2 key just fine but receive error 0xC004F015 (The Software Licensing Service reported
that the license is not installed) when I try to install my 8.1 KMS key.
What I'm gathering from this thread is that I have to set up a Windows 8.1 host and set it up to be a KMS server exclusively for activating Windows 8.1. Is this correct? If so, Microsoft needs to fix that. I have a SERVER for activations for a reason: it
is a server, not a client. If I am mis-understanding, how do I get my Windows 2008 R2 server to accept the Windows 8.1 KMS key for activating 8.1 clients?
Thanks!
You don't need Windows 8.1 KMS key. Your 2012 R2 KMS key will be able to activate your Windows 8.1 machines. So your current set up is fine, no need to set up another Windows 8.1 KMS host.
My problem is I don't have 2012 R2 KMS key as I didn't buy any Windows 2012 R2 license. So I can't use 2012 R2 KMS key to activate my Windows 8.1.
Oh that's interesting. I guess I need to play around more because my 8.1 test machine isn't activating. I'll start a new thread for that if needed. Sorry for the confusion.

How to add Windows 2012 R2 RDS to Existing Windows 2008 R2 Terminal Server

I currently have a Windows 2008 R2 Terminal Server running and I am looking to add a Windows Server 2012 R2 server to it. All I see when I google the setup is only for Windows Server 2012 R2 RDS, cant find anything to integrate with a current 2008 R2 Terminal
Server.
Can anyone help with this or point me to a blog I possibly missed?
Thanks.

Hi,
Thanks for your comment.
Yeah, agree with diramoh; as already commented. If you want user session from RDS Server 2012 R2 then you need to install RDS License role on server 2012 R2, purchase and install RDS CAL (per user or per device) according your requirement and then you
can use user session for server 2012 R2 and also for lower version.
But as you already have Server 2008 R2 RDS CAL, then with that you can simply access lower version but can’t manage Server 2012\R2.
For more information, you can refer following document.
Licensing
Windows Server 2012 R2 Remote Desktop Services
Hope it helps!
Thanks.
Dharmesh Solanki

How to set the path variable on Windows ME?

I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.

Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.

How to set the fix size jframe window

when I run the jframe ,the jframe window size is very small
1)how to set the fix size jframe window??
2)how to set the jframe cannot change the window size??
thx~~

1. You can set the size by calling JFrame's method setSize. There are two versions of this method: (1) setSize(int width, int height) and (2) setSize(Dimension d). Note, that when you use this method to set the frame size, you don't have to call JFrame's pack method.
2. JFrame has a method called setResizable(boolean resizable) which you can call with the argument false.
Without any ill intent, these questions are regarding something that is very easily answered by looking at the documentation for the JFrame class. I suggest to anyone working with swing to at least look briefly through the base classes they're extending before giving up. In my experience it is always more gratifying to figure things out on my own than asking someone. But please don't take this the wrong way, I respect people who seek out help in order to further their knowledge, instead of just giving up.

How to set field type choice using csom (c#)

I have a field type: Choice (menu to choose from) which is not multichoice. How do I set a value?
I have found code for multiple choice but it doesn't seem to work for single choice.

Hi,
The following code snippet for your reference:
newListItem["ChoiceFieldName"] = "ChoiceValue";
newListItem.Update();
clientContext.Load(newListItem);
clientContext.ExecuteQuery();
If you are assigning a Value which is not in the Choice Column, You need to create a choice value then assign it to the item.
More information is here:
http://sharepoint.stackexchange.com/questions/124999/how-to-set-field-type-choice-using-csom-c
Best Regards
Dennis Guo
TechNet Community Support

How to set different icons for different windows which is seen in the top left corner?

Hi
How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
Is there any way to set icon by calling any dlls.
Thanks & Regards
Samuel J
[email protected]

Hi Sam,
no problem. See the attachment.
Mike
Attachments:
TestIcon_LV85.zip ‏44 KB

How to set iphone 5 bluetooth on windows 7 64 bit in notebook Toshiba

you can tell me how to set iphone 5 bluetooth on windows 7 64 bit in notebook toshiba qosmio f750

Unless you're trying to tether your Internet connection from the phone to the computer, you don't. That is not a feature of the iPhone.

I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

?? I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

Thanks, David. i thought i had it set correctly in Preferences in L&R. Being i was wearing my suspenders and belt at the same time i went back to L&R, cleared what was there and re-entered same to include unchecking and rechecking Time Format fgor 24-hour time. It works now. Thanks again.

What is an smpt password? I have problems sending photos using the stamp at the bottom because it asks for some smpt password and I have no clue to find out what it is, how to set one of find one if I somehow put one in and don't know what it it.

what is an smpt password? I have problems sending photos using the stamp at the bottom because it asks for some smpt password and I have no clue to find out what it is, how to set one of find one if I somehow put one in and don't know what it it.

It's the password for your outgoing mail in your Mail account. You need to set it up in your Preferences.
Regards
TD

Hi, I'm using windows 8 on my new PC and would like to sync my iPhone calendar with it. Is it possible? How do I do it? Thanks iPhone 4,

Hi, I'm using windows 8 on my new PC and would like to sync my iPhone calendar with it.
Is it possible?
How do I do it?
Thanks
iPhone 4,

Easiets thing to do is use iCloud. Download & install the Windows Control Panel:
http://support.apple.com/kb/dl1455

How to set up Oracle Alerts using Lotus mail

Hi there
Anyone there knows how to set up Oracle Alerts using Lotus mail

Hi All. We are looking to install 64-bit Oracle 11g
on 64-bit SUSE Linux Version 10 SP1. We would like to
start up with a 16GB SGA and possibly increase to 50GB. How you calculate you need to start database with 16 GB SGA , and latter need to increase it to 50 GB ?
Can anyone help us with a list of rpms and
kernel settings we would need to get started? ThanksCheck following link for rmp and kernel parameters
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/pre_install.htm#sthref85
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

How to set XPoweredByHeaderLevel to NONE using wlst

How to set XPoweredByHeaderLevel to NONE using wlst (by default the value is SHORT).
I mean, I have created a domain using wlst.
Now I want to set XPoweredByHeaderLevel of WebAppContainerMBean to NONE using wlst.
It will be helpful if a sample python(Jython) script is provided.
Please help.

Here is a quick Jython example of how to do what you want:
#assuming you already have correct imports for wlst module
#connect to the AdminServer using proper credentials and host information
wlst.connect(username, password, host_info)
#extract domain name
domainName = wlst.domainName
#start an edit session and navigate to the WebAppContainerMBean
wlst.edit()
wlst.cd("/WebAppContainer/" + domainName)
wlst.startEdit()
#set the value of the XPoweredByHeaderLevel attribute to "NONE"
wlst.cmo.setXPoweredByHeaderLevel("NONE")
#activate the change
wlst.activate()

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

Similar Messages

Maybe you are looking for