How to set up for wireless through time capsule

I have at&t u-verse but I disabled the wireless in u-verse modem and now have forgotten the steps to take to set up my time capsule but to wireless. I had my time capsule used as wireless router before we moved to a different state but it has been a few months not that I was using the at&t wireless router and I didn't like it and my time capsule would not back up so that's when I realized I must disable my wireless in the At&t modem and use the time caspule wirelss. Please help. Thank you

Power on the Time Capsule for a few minutes, then hold in the reset button firmly with a ball point pen or something similar for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Connect an Ethernet cable from one of the LAN <--> Ethernet ports on the back of the Uverse router to the WAN "O" port on the Time Capsule
On your Mac, open up Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices tab
Click on the Time Capsule
The setup utility will open up automatically and take a minute to analyze the connections then suggest a setup on a screen that looks like this:
Type in a simple name that you want to use for the Wireless Network Name
Type in a name that you want to use for the Time Capsule device
Type in a password
Verify the password
Click Next
The utility will set everything up for you in a minute or two. When you see the message of Setup Complete on the screen, click Done
You can now log onto the wireless network that you created by selecting the name and entering the password
Post back on your progress and we will next get backups going again

Similar Messages

Printing wirelessly through Time Capsule

Can I do that? My iMac is connected via ethernet to my time capsule. If I connect ANOTHER ethernet from time capsule to the printer:
A) Will MacBook recognize it as a viable printer
B) Will I be able to print?

Hi themothertucker,
Short answer, yes the connection to the iMac will be slower than if you were directly wired but based on how far you are away from the unit that difference might not be very noticeable.
Just to clarify... you have your modem connected to your Time Capsule, you're then wired from the Time Capsule to the rear of the iMac? I take it you currently use the Time Capsule as a backup solution for your iMac? Curious, why not just connect the printer via USB to the rear of the iMac? Was there a particular reason you wanted to print over WiFi? If you're wired to the Time Capsule then you must not be too far away from it.
The other option (theoretically) is you can wire the printer (via USB) to the Time Capsule and then have the iMac connect over WiFi to it. You can still backup to the TC and then print to the connected printer. Plus, you could then move your iMac somewhere else if you don't like where it is and have it located now out of convenience for the router/modem.
You can setup the printer via Bonjour which is a built-in service on the Time Capsule and iMac.

Can't print through Time Capsule, but I can using USB to my MacBook

I posted something similar in the Time Capsule forum, but thought I'd try here too. I just got a new Canon MF4690, and I can print to it using USB from my MacBook just fine. Not so when printing wirelessly through Time Capsule. I can see the printer, but the job stops every time. When I set up the printer the driver is "generic" using the Time Capsule connection, but has the specific model number when I add the printer using USB.
I can see the printer in the Printer preference pane, and in Airport Utility, but when I print a job, under "status", it says "stopped". I'm baffled that this is happening! I hope someone can help.

Joe P. wrote:
Would I connect my Canon to the TC and set up the printer? Do I choose IP, AppleTalk or Other?
If the TC is providing the wireless access and is your only Ethernet hub, then yes you would connect directly to it. If you have another Ethernet hub connected to the TC, then you could connect the Canon to it. Either way, you want to use the Ethernet connection of the Canon and set a valid ip address in it.
With an ip address set, you can then add the printer by using the More Printers > Canon IP (UFR2) menu. This window lets you enter the ip address of the Canon and a queue name of LP. Then when you press okay, the UFR2 software should select the correct driver for your printer.
PaHu

How to use AX1 for wireless audio and Time Capsule simultaneously?

I am trying AirFoil to Stream Pandora (Safari) to an amplifier and speakers in the next room connected to an older Airport Express.
I can play iTunes 11.0.1 (on a MacMini 2.26 GHz running 10.6.8) to this older Airport Express 802.11g (before N came out - Is this called AX1st?) with the audio out the Express connected to my amplifier and speakers and wirelessly play my music. To do this I have to choose the Airport Express as my network device which means I loose my Time Capsule, which is the device with my internet connection.
Can you tell me how to stay on the internet with Time Capsule and stream to this Airport Express?
If I try to extend to this Airport Express I get an error message: "The Network You Selected cannot be extended." (I don't know if that is a "g" "n" thing or what?)
Do I need a newer Airport Express, or a Netgear or how to get Pandora to an amplifier in a different room, wirelessly? Then the question will be, how to do this to three different amplifiers in three different rooms.

How do I
Make your Express 'join' your Time Capsule's WiFi network in AirPort Utility. This will work wirelessly however your Express will not function as an extender in this mode.
I'm Using Airport Utiity 5.6.1
In AU in "Aiport / WIreless tab" I hoped it would be as simple as the word 'Join' showing in the Wireless Mode drop down. But it does not.

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to set registry for sql client on win...

Hi.
how to set registry for sql client on win fro work with Ukranine
charset.
I got such problem
nls_language set to American_Ukranine.clmswin1251 on client
this give me ukraniane char.
but it override all my settings in initsid.ora this mean
nls_date_format=DD-MON-YYYY
nls_date_languages
twhen I type select sysdate vrom dual answer is 11-jun-99, but
not 11-(ukr month)-1999;
What should I correct in regestry? ( i don't like to do alter
session set..... each time I start sqlplus )
Thank You in advice
null

you can create method on Application Module and to Client listener
like
    public Object[] getData(Number n,Date d)
Object val[]= new Object[2];
String sp = "{? = call get_data(?,?,?)}";
            Connection conn = null;
            CallableStatement proc = null;
            try {
             //   conn = isConnSupplied ? userConn : ResourceManager.getConnection();
                proc = getDBTransaction().createCallableStatement(sp,0);
            proc.registerOutParameter(1, OracleTypes.Number);
            proc.setObject(2,12);
           proc.setObject(3,dateobj);
          proc.registerOutParameter(2, OracleTypes.VARCHAR);
            proc.executeQuery();
             int amttext= proc.getInt(1); //for return value
String msg=proc.getString(2);//for out param
val[0]=amttext;
val[1]=msg;
            catch(Exception e)
                System.out.println(e);
return val;
}and access this method from backing bean using following code-
            BindingContext bindingctx=BindingContext.getCurrent();
               BindingContainer binding=bindingctx.getCurrentBindingsEntry();
            OperationBinding operationBinding1 = binding.getOperationBinding("getData");
            operationBinding1.getParamsMap().put("n",anyno);
            operationBinding1.getParamsMap().put("d",dateobj);
            operationBinding1.execute();
            String vval[] =(String[])operationBinding1.getResult();

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Let's say that an iPhone is one of the wireless clients that you want to allow access to the network.
The Description of this device is anything that you want to specify for easy identification purposes. For example, the Description might be something like......
Rex's iPhone
The MAC Address, also known as a Wi-Fi Address is a unique indentifiction number that is assigned to every device. The number will always follow this form:
xx : xx : xx : xx : xx : xx, where "x" could be a number or letter.
To find the MAC Address or Wi-Fi Address of an iPhone or iPad.....
On the Home screen.....
Tap Settings
Tap General
Tap About
Wi-Fi Address is the item that you want
If you have a Mac computer......you can find the MAC Address or Wi-Fi Address as follows:
Open System Preferences (gear icon on the dock)
Open Network
Click on Wi-Fi on the left
Click Advanced at the lower right
The Wi-Fi Address for the Mac is located at the bottom of the window
Other wireless devices usually have the MAC Address or Wi-Fi Address on the label on the back or bottom of the device

Setting up new HP Laserjet CP1525nw wirelessly with Time Capsule

Im having issues setting up my new HP Laser printer via wirelessly with Time Capsule. I have tried with the Wireless Client Setup
Assistant but cannot get it to work. Any help or suggestions would be appreciated. Thanks

I tried to get the CP1525nw set up on my computer here at the office and found, much to my chagrin, that the CP1525 is not supported under 10.7 and retroactively not supported under 10.6. The way that I have found to get around the issue is to connect it wirelessly via a static IP address and use a generic postscript driver. I'm hoping that they will release a driver to Apple soon, but until then, generic is the only way to go and I have not found any print quality issues.

How to set password for BPEL domain

Hi,
I am new to SOA.
I want to setup client-server environment for few developers.
I installed SOA 10.1.3.3 in the server machine.
And I created few domains in BPEL, one for each developer.
It didn't ask me to set the password while creation of the domain.
Please let me know how to set password for newly created domain so that each developer login to his/her own domain and manage processes.
Thanks!!!

Thanks for the prompt response.
What roles should I give to my developers to allow them to manage their services in ESB control, BPEL control, WSM control.
And I would like to know how to set the password for a BPEL domain too.
Message was edited by:
user644377

How to set password for every application

Hi,
As a administrator how to set password for every weblication in sharepoint 2013.
Is there any way to set?
Thanks,

Who's password are you trying to set? Please provide more details.

How to set password for a zip file and should be checked when reading that

Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.J

Heyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply.

How to set password for Local are connection?

How to set password for Local are connection?

do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

HP 6300 all in one can't set up for wireless use

can't set up for wireless use

That is because the printer does not support wireless connectivity to a router. You can with an optional Bluetooth adapter to one computer wireless. However since this has an Ethernet connection you can connect it to your router via this or you can use the below information to convert your Ethernet wired printer to wireless.
Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Connect-your-wireless-printer-when-away...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to set up for wireless through time capsule

Similar Messages

Maybe you are looking for