How to set up iCloud so one user on my computer has it and the other doesn't.

I have two users on my laptop. How do I keep iCloud for User #1 but disable it (so it STOPS asking me to set it up) for User #2?

Hi,
Try doing a FULL restore of your device and then put everything back on it. Tell me if this works.
xxmitchxx90

Similar Messages

  • I was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    i was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    Problem here is you admit you cannot afford the service.
    And you want to blame Verizon for losing a job because you have no cell phone.
    If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
    No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
    Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
    Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
    Good Luck

  • HT4913 one of my two phones accepted imatch and the other says that i meed to subscribe. Why?

    one of my two phones accepted imatch and the other says that i meed to subscribe. Why?

    Try resetting the one dropping calls more often.  Hold the on/off and home switches together for about 10 seconds till the Apple logo appears.
    If that doesn't help, consider restoring it using iTunes.

  • I have two kinds of songs. one kind is buying from itune store, and the other kind is burning from CD. i got a new 5s, but it only shows the songs that i buy in itune but not the one that from the cds

    i have two kinds of songs. one kind is buying from itune store, and the other kind is burning from CD. i got a new 5s, but it only shows the songs that i buy in itune but not the one that from the cds

    Are the ones from the CD's on iTunes? You may just have to sync them over to the phone.

  • Firefox start with two pages. One says welcome to Firefox etc. And the other is my homepage (google). I want to stop the first page. How can I do this??

    Firofx (5.0) starts with two pages. One is the welcome to Firofox and also that there are Add-ons available. The other one is my homepage (google). I want to stop the first page. How can I do this?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • TS1969 What do I do if I am unsure who has iTunes open,. One account on PC is logged off and the other user is logged on, however iTunes will not open

    THere are two users on pc. One is logged off, however when I try to launch iTunes, The message pops up another user logged on, ask user to log off and try again. What do I do?

    Re-start the computer.

  • HT3702 I purchased two songs from ITunes. One amount has cleared and the other STILL hasn't posted to my account? Why is it taking so long. I have to change my cc number, but if this one still hasn't posted, then my cc won't go through

    I purchased two songs at the same time off of ITunes and only one has cleared my credit card...Why? What if I need to change my cc and my purchase still hasn't cleared?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Trying to connect two WRT54GS one has gateway and the other as router... HELP!

    Long story short i have 2 WRE54G v2 and still dont get the signal i want. My last ditch effort is picking up a WRT54GS v6 last friday with high gain dB antena to act as an extender. My current WRT54GS is v1 with high gain dB antena. Can i get these routers to talk to one another wirelessly?
    Help!!!
    Idleloud

    Mort is right.  They can not connect together with the linksys firmware.  Some third party firmware does allow that but third party firmware will void any warranty and you will not get any support from linksys.  I recommend adding a access point to increase the range from your WRT54GS.
    Richard Aichner (Ikester)

  • Subtracting two waveforms, one aquired using DAQ analog voltage input, and the other one being internally generated

    Hello NI Community,
    I am new to LabView and was hoping someone might be able to help with a question I have. Right now, I am using a DAQ unit to sample an externally generated sinusoid and I would like to alter that signal by adding to it another signal that I could control using the front panel. Whenever I try to just connect the input with something like the sine waveform vi and put a subtraction sign between them it doesn't work (I get an empty waveform graph). To get around this, I have resorted to sending out a signal (through an analog output) and then reading the signal on the Daq, and then finally I add the two together. Doing it that way works, but it wastes two channels and I imagine there is a better way. I have attached my VI, and I labelled the location of interest  "Where the Signals Get Subtracted", which is currently shown using the two inputs.
    Thanks,
    Leo

    What a mess.  I have no idea where you are trying to do the subtraction.  Can you make a very small VI (one whose Block Diagram fits on a single screen) that shows what you are trying to do?  Include the Sine Wave Generator, and you can include a "Black Box" that says "From DAQ".  But thank you, at least, for posting code, not a picture.
    Here's a suggestion that may help make things less messy -- do you know about the Diagram Cleanup tool?  See the icons at the top?  The right-most one looks like a broom next to a VI.  Save your VI first (in case you don't like what it does), Select All (Ctrl-A), then click this button -- you may like the result.
    Bob Schor

  • Is it possible to have two hard drives connected to my airport extreme and use one to store my itunes library/iphoto and the other to backup via time machine?  Will the second (larger) drive back-up both my mac HD and my other external airport drive?

    For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine.  This has worked fine without any issues.  What I would like to do now is to move my itunes and iphoto libraries off of my laptop (space constraints) and store them on a second external hard drive (HD2) connected to the airport extreme.  I have successfully connected the second hard drive using a Belkin powered USB hub.  What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?  I apologize if this has already been answered but i've read conflicting responses on various message boards and a number of responses were dated so I wanted to make sure I received the latest information. 
    thank you

    kosty wrote:
    For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine.  This has worked fine without any issues. 
    That may be true, but you need to know that backing-up that way is unreliable and not supported by Apple.   See:  Using Time Machine with an Airport Extreme Air Disk.  Do not be surprised if those backups suddenly turn up corrupted.
    What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?
    No.  Time Machine cannot back up from any network location.  The 3rd-party utilities CarbonCopyCloner and ChronoSync may be workable alternatives.

  • I have an iMac, iPad 2 and one child has an iTouch and the other an iPhone 4S.  How do we get separate facetimes?

    Hello, I have an iMac and an iPad 2.  one of my kids have an iTouch and the other an iPhone 4S. 
    When their friends call, it shows up on my iPad 2 and the list of friends is the list of friends for my child
    who has the iPhone 4S.    To my knowledge, we all have to share an APPLE ID to share music and apps?...
    So is that the problem....what happens if we have separate APPLE ID's....?
    Even though we are an APple fam, I am still not sure how the whole thing works....
    How do we get separate facetimes?  Thank you so much in advance.  

    Actually you can have separate apple ID's for icloud and facetime but use the family one for purchases so you can share your apps, music..
    Each owner opens up a Apple ID for only their device(s).. Log into icloud using new apple ID on each device for each person. Hit facetime in settings, and input your new apple id as facetime ID.. Done..
    Now go to settings > store and make sure your family account is inputed there on all the devices so you can share your purcahsed music, apps, videos, etc....
    I am sharing purcahses with my entire family but we all have separate icloud, facetime, apple ID etc.. Its imperative you have split Apple ID's for icloud otherwise all your phonebooks will mix and match.....
    Also as far as iphone goes.. Iphone can be set up to use apple ID to call or phonenumber (by default) So if you facetime a number it will ring only on that phone, if you facetime an apple ID that is on the iphone it will ring on all devices associated with that apple ID

  • Why is one slot saying 2.5gt/s and the other 5.0gt/s?

    Hello,
    I have a 2008 mac pro with 3.0 Ghz Harpertown processors. I thought these 2008 mac pros had two PCIe 2.0 slots, but yet according to my system profiler.. one slot is reporting at 5.0 and the other is 2.5 - what gives?
    ATI Radeon HD 4870:
    Name: ATY,MotmotParent
    Type: ATY,MotmotParent
    Driver Installed: No
    Bus: PCI
    Slot: Slot-1
    Vendor ID: 0x1002
    Device ID: 0xaa30
    Subsystem Vendor ID: 0x1682
    Subsystem ID: 0xaa30
    Revision ID: 0x0000
    Link Width: x16
    Link Speed: 2.5 GT/s
    ATI Radeon HD 2600:
    Name: ATY,Lamna
    Type: display
    Driver Installed: Yes
    Bus: PCI
    Slot: Slot-2
    Vendor ID: 0x1002
    Device ID: 0x9588
    Subsystem Vendor ID: 0x106b
    Subsystem ID: 0x00a6
    Revision ID: 0x0000
    Link Width: x16
    Link Speed: 5.0 GT/s
    Shouldn't both slot 1 and 2 be PCIe 2.0?? Why is one being reported as 1.1 and the other is being reported as 2.0? Is there something wrong with my PCIe slot?? I am saddened to hear this as I traded up my 2006 mac pro and now I see that i am not getting 2 x PCIe 2.0 slots as reported.

    DpArt,
    Are you sure that is what the problem is? When I get home from work tonite, I will try to swap the cards and see. Originally, my harpertown mac shipped with the ATI Radeon 2600 XT, a very mediocre card and its in slot 2 reporting 5.0, while the ATI Radeon 4870 is a 1GB slightly overclocked(applemacanix) flashed card and its in slot 1 reported as 2.5 which I am hoping that this is an oversight and not a mechanical failure or problem with my pcie slot.

  • We have two Apple ID's but share the same computer....that runs Itunes...How do i setup Icloud for ea. user ID?

    We have two Apple ID's but share the same computer....that runs Itunes...How do i setup Icloud for ea. user ID?

    You can't merge Apple IDs.  What you could do is set up your phone to use the same iCloud accout you are using on your Mac.  To do this, go to Settings>iCloud and turn all synced data (Contacts, Calendars, etc.) to Off.  When prompted, choose to keep the data on the phone.  When everything is off, scroll to the bottom and tap Delete Account.  Now add the iCloud account you set up on your Mac (with the same Apple ID) and turn syncing back on for Calendars, Contacts, etc.  When prompted, you will probably want to choose merge, to merge the data on your phone with the existing data on this iCloud account.

  • How to set two radius servers one is window NPS another is cisco radius server

    how to set two radius servers one is window NPS another is cisco radius server
    when i try the following command, once window priority is first , i type cisco radius user name, it authenticated fail
    i can not use both at the same time
    radius-server host 192.168.1.3  is window NPS
    radius-server host 192.168.1.1 is cisco radius
    http://blog.skufel.net/2012/06/how-to-integrating-cisco-devices-access-with-microsoft-npsradius/
    conf t
    no aaa authentication login default line
    no aaa authentication login local group radius
    no aaa authorization exec default group radius if-authenticated
    no aaa authorization network default group radius
    no aaa accounting connection default start-stop group radius
    aaa new-model
    aaa group server radius IAS
     server 192.168.1.1 auth-port 1812 acct-port 1813
     server 192.168.1.3 auth-port 1812 acct-port 1813
    aaa authentication login userAuthentication local group IAS
    aaa authorization exec userAuthorization local group IAS if-authenticated
    aaa authorization network userAuthorization local group IAS
    aaa accounting exec default start-stop group IAS
    aaa accounting system default start-stop group IAS
    aaa session-id common
    radius-server host 192.168.1.1 auth-port 1812 acct-port 1813
    radius-server host 192.168.1.2 auth-port 1812 acct-port 1813
    radius-server host 192.168.1.3 auth-port 1645 acct-port 1646
    radius-server host 192.168.1.3 auth-port 1812 acct-port 1813
    privilege exec level 1 show config
    ip radius source-interface Gi0/1
    line vty 0 4
     authorization exec userAuthorization
     login authentication userAuthentication
     transport input telnet
    line vty 5 15
     authorization exec userAuthorization
     login authentication userAuthentication
     transport input telnet
    end
    conf t
    aaa group server radius IAS
     server 192.168.1.3 auth-port 1812 acct-port 1813
     server 192.168.1.1 auth-port 1812 acct-port 1813
    end

    The first AAA server listed in your config will always be used unless/until it becomes unavailable. At that point the NAD would move down to the next AAA server defined on the list and use that one until it becomes unavailable and then move to third one, and so on. 
    If you want to use two AAA servers at the same time then you will need to put a load balancer in front of them. Then the virtual IP (vip) will be listed in the NADs vs the individual AAA servers' IPs. 
    I hope this helps!
    Thank you for rating helpful posts!

  • HT4759 How to set up iCloud Mail on Mac OS X Leopard 10.5.4

    I need instructions on How to set up iCloud Mail on Mac OS X Leopard 10.5.4

    Welcome to the Apple Community.
    Mail preferences > Accounts and set it up using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Entering iCloud email settings manually in Tiger

Maybe you are looking for

  • IDVD is looking for a server that no longer exists...

    When I try to start iDVD it goes out to look for media on a shared drive that no longer exists... How can I make iDVD forget about that drive?

  • Can I import just the audio from a DVD into itunes????

    I'm a beginner to this Itunes and have been wondering this. If I can take audio files off of CDs and put them into Itunes. Can I take just audio from a DVD and put that into Itunes. Example: Can I take the audio from a live concert DVD for just one s

  • Forms question ... EXTREMELY URGENT

    gurus, i have the following code in the pl/sql section of the insert button - declare p_rate_type dvi.ad_base_rate_types.rate_type%type; cnt_fnd number; err_rate_type exception; begin ** get the rate type p_rate_type := p_session.get_value_as_VARCHAR

  • ESS worksets not visible in second level navigation

    Hi all,                 I installed ESS 600 sp08 on EP 7.0. I dint changed anything.The ESS worksets should be visible in the second level navigation .But in my case they are not visible in the second level navigation.They are visible in the detailed

  • PO Translation

    Hi, For PO printout in spanish language, We have maintained the translations. But we are not able to see the output in spanish. let me know the settings to have PO printed in different language. Is the print logon relevant? i.e. if I login in English