How to set up Link Aggregation on Windows 7 ?

I am going to buy a new Switcher that is LACP (Link Aggregation Control Protocol) supported so I can get a little bit better internet by combining my two ethernet ports on my MacPro (Mid 2012) where i have Windows 7 Ultimate installed as well as Mac OSx. On Mac OSx it is easy to set up Link Aggregation takes only 30 sec by going to Manage Virtual Interfaces and click round (for doing this you need a Link Aggregation supported router or switcher), but on Windows it seems to be a little bit harder after looking around for a while now. Is there anyone here who knows how to do it or know if its possible to set up Link Aggregation on Windows 7 ?
I'll be thankful for any help i can get

hehe I thought over that too
But since I dont got a windows forum account I thought of asking here fisrst

Similar Messages

  • How to set the path variable on Windows ME?

    I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.

    Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.

  • How to set different icons for different windows which is seen in the top left corner?

    Hi
    How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
    Is there any way to set icon by calling any dlls.
    Thanks & Regards
    Samuel J
    [email protected]

    Hi Sam,
    no problem. See the attachment.
    Mike
    Attachments:
    TestIcon_LV85.zip ‏44 KB

  • How to set the fix size jframe window

    when I run the jframe ,the jframe window size is very small
    1)how to set the fix size jframe window??
    2)how to set the jframe cannot change the window size??
    thx~~

    1. You can set the size by calling JFrame's method setSize. There are two versions of this method: (1) setSize(int width, int height) and (2) setSize(Dimension d). Note, that when you use this method to set the frame size, you don't have to call JFrame's pack method.
    2. JFrame has a method called setResizable(boolean resizable) which you can call with the argument false.
    Without any ill intent, these questions are regarding something that is very easily answered by looking at the documentation for the JFrame class. I suggest to anyone working with swing to at least look briefly through the base classes they're extending before giving up. In my experience it is always more gratifying to figure things out on my own than asking someone. But please don't take this the wrong way, I respect people who seek out help in order to further their knowledge, instead of just giving up.

  • How to set iphone 5 bluetooth on windows 7 64 bit in notebook Toshiba

    you can tell me how to set iphone 5 bluetooth on windows 7 64 bit in notebook toshiba qosmio f750

    Unless you're trying to tether your Internet connection from the phone to the computer, you don't. That is not a feature of the iPhone.

  • How to set tomcat server path in windows XP

    hi frnds,
    I am new to java technologies.I am trying to learn all alone Hw am wandering how to set class path of tomcat server in windows xp.
    it shud be in user varibles r system varibles
    Thanks everyone in advance,
    cheers........
    roopa

    What exactly are you trying to accomplish here?

  • How to open form links in new window in Acrobat XI

    Does anyone know how to have a link within a form open a new instance of a browser?

    Answered through email:
    Hello,
    I don´t understand your problem. You have not tried the component mentioned in my replies, right? You have tried Launch URL component from WD Native. Because if you have, you would ask such a question. This component is a u201Cgroupu201D of a text field and a button. That means, that fits your problem completely IMHO. Place the component on your form layout, Set the presence of the text fox inside this Launch URL and you will see what address is being launch when clicked on the button.
    You said you have your address in the text field. So this is the same. Just change the source where the button takes the URL from or copy the value from your form into this one.
    Hope this helps.
    p.s.: looks like you have absolutely no exerience with JS coding.
    That means you need to read first and code later, right? Start here: http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf

  • How is target id linked to component window

    Hi,
    I've created a Navigation Profile and a Work Center, that I wish to link to a Component Window via a logical link.
    I need a target id to connect to the Component window. I created an inbound plug to the window but am not sure as to how to create the target id. Please let me how i need  to create the target id and how to link to component window.
    Thanks,
    Urmila

    Visit the following link it will help u to link the component.
    http://wiki.sdn.sap.com/wiki/display/CRM/AddyourcustomBSPcomponentasalinkinaWork+Center

  • How to set up link on icon to forward PDF file as email attachment

    HI,
    I need urgent help.
    I know this used to work but cant find it in Acrobat XI.
    We created a file for a client, on the last page is a twitter, facebook and linkedIn icon which are set as links in Indesign to forward to the matching social network. Works fine when I created PDF with Hyperlinks.
    We also set up an envelope symbol which shall get, now where it is set up as PDF,  a link, so the PDF itself can get forwarded as a email attachment.
    I can not find this function on a MAC nor on PC Acrobat XI.
    Hope you can help, much appreciated!!!!
    THANKS

    Have a look at this thread:
    http://forums.adobe.com/thread/1275490?tstart=0
    where there is a script for submitting the PDF by email.

  • How to set up RAID 5 in Windows 8

    What are the procedures and settings  to set up RAID 5 in Windows 8?

    What are the procedures and settings  to set up RAID 5 in Windows 8?
    I would not do it... Throw in one more spindle and build RAID10 (or Storage Spaces equivalent of it). There are very few workloads working well with parity RAIDs and also single parity RAID has own issues with modern high-capacity spindles (slow rebuild
    times, silent bit rot, high chances of a double failure etc). See:
    Why RAID5 is bad?
    http://community.spiceworks.com/topic/356486-why-is-raid5-so-bad
    Good luck!
    StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • How to set the link to the result which are executed my query from database

    Hi,
    i have successfully displayed the results which are available in the database by jdbc, query.
    Then, How to give the link like href to each & every result...
    note: The number of records may be change. depending upon the records availablity in the database. but every result have the link.
    Thanks in advance.
    Regards
    Kumar

    hai kumar..
    i post an example code ..
    <%
    ResultSet rs1=stmt.executeQuery("select fromu,subject,message,mdate,status,mesid from message where to='" + lname +"'" );
    while(rs1.next())
         l=rs1.getLong(6);
         out.println("<tr align='center'> <td> <a href='deletemessage.jsp?mesid="+ l + "'>Delete </a></td><td>" + rs1.getString(1) +"</td><td> <a href='viewmessage.jsp?mesid="+ l +"'>"+ rs1.getString(2) +"</a></td><td>"+ rs1.getString(4) +"</td><td>"+ rs1.getString(5) +"</td></tr>");
    %>

  • How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

    Hello, 
    I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.  
    I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
    to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
    there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
    How can implement this for this sending outgoing faxes as well?
    I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server. 
    Any help is appreciated. Thanks!

    Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
    http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
    The article is so easy to understand with detail procedure and guideliness
    Exchange Queries

  • How to set default size for .chm window?

    I know there is an answer at grainge.org, but it seems to be
    referring only to a .chm using skins, which I am not.
    Anybody know how to make the default size of the .chm larger?
    thanks, Leisa

    Lacona,
    The default window size is set in your windows properties
    dialog in RoboHelp. It can also be set manually in the .hhp file
    before you compile. If you open the .hhp file in a text editor,
    such as Notepad, you will see a [WINDOWS] section and for each
    window defined there will be a series of numbers. One of these is a
    vector [in square brackets] that defines the original position.
    These are absolute screen pixels.
    In older versions of RoboHelp, one of which I use, there was
    a limit to the size of the window RH would allow but when I changed
    the .hhp, RoboHelp didn't try to overwrite it unless I reopened the
    Windows properties dialog. I'm not sure how the latest versions
    handle this but you might try editing the .hhp with Notepad and
    then compiling the .chm.
    John

  • How to open a link in a Window NOT a Tab in OS X Mountain Lion

    For those of you who Hate having links open in tabs, especially when you have a window open and minimized to your doc.  The link will take that
    minimized window and use it to stick a tab in it and then open the link........WHAT A PAIN!
    Here's how to avoid that problem and have the links open in a Brand New Window.
    Safari/Preferences/Tabs
    Uncheck both boxes
    Now, the instructions below change to window instructions (not tab instructions)
    See the little window to the right of:  Opens pages in tabs instead of windows:  Click the little arrows and select NEVER! 
    Now you have to insert a checkmark in the 1st box:  (Butterfly) - click opens link in a new tab
    The below instructions will revert back to tab instructions, Do Not Worry.  All Is Good.
    The fact that you have selected NEVER, means that NOW, the links will open in Brand New Windows!  Yeah!!!
    Close the Preference Window and click away. 

    vveena123 wrote:
    Hi everyone,
    I immediately need help,plz help me.this is not the way to get help around here
    try stating the problem professionally, without the assumption that your problem is important to others
    I have a jsp which has a link that should open in a new window.
    when the user clicks again the same link it should not open in another new window instead it should open the previous window.this has nothing to do with java or jsp
    this is an html target question
    testing
    say if a user clicks the link 5 times it shud not open 5 windows instead only 1
    Thanks in advanceuse target="new" i think

  • How to set up user account in Windows 7/Premiere Elements 8.0/8.0.1?

    At the present time I have only the Windows XP Professional SP3 32 bit operating system which works from a User Account with Adminstrative Privileges when it comes to using Premiere Elements.
    I have read that in Windows 7, the default user account is one with standard rights. My first question is, when using Premiere Elements 8.0/8.0.1 in general in a Windows 7 32 or 64 bit environment, do you have to elevate the user account to one with adminstrative rights and, if so, how?
    My second question is, is there anything in the Windows 7 user account setup that would specifically target the Premiere Elements Project Archiver/Archiver "Trimmed" as well as Copy options to abort with the message "no user privileges to perform this operation"? The rest of the program performs OK. Supposedly inadequate hard drive space is not a factor.
    Thanks for any insights into these two questions.
    ATR

    SG
    Just an update to the question that I presented when I started this thread.
    You really never did say what type of a User Account you are using in your Premiere Elements 8.0/8.0.1 on Windows 7? But based on the information provided by several users, User Account with Administrative Rights seems to be the way to go since all of them were using it and had systems that were running well. I would have expected that based on the Premiere Elements Windows XP requirements. I have yet to have someone come forward to say that they are using Premiere Elements 8.0/8.0.1 on Windows 7 with a User Account with Standard Rights and the program is running well. Will you be that one?
    Besides me switching from Windows XP to Windows 7 in the near future, what motivated this line of questioning was the report that I had seen of a user with Premiere Elements 8.0/8.0.1on Windows 7 who was reporting "permission" error messages when trying to archive a project with the Project Archiver (Archiver "Trimmed" and Copy options). Further questioning brought out that the problem extended to the AutoSave feature as well. The user claimed to be saving to an external hard drive (formatted NTFS) with about 800 MB free space. And still further questioning brought out that the error message included a free space and/or permissions error. Yes, there were extremely large file sizes involved here (way over 4 GB)
    The story had a happy ending where the remedies were:
    1. User Account with Administrative Rights
    and the major
    2. Formatting the thought to be NTFS external hard drive from FAT32 to NTFS.
    ATR

Maybe you are looking for