How to set up maintenance budget per equipment and check budget avail.

Dear All,
My client have a requirement on maintenance budget per equipment.
Currently in SAP, as I checked around, its maintenance budget per order or group of orders.
Any technical advice on how to set up maintenance budget per equipment ?
The client wants to use budget to control whether the maintenance order
can be released or not.
Thanks in advance.
Kiran

Hi
To maintain budget for maintenance order please refer the following link.
[http://help.sap.com/saphelp_45b/helpdata/en/8f/6aec6eb435d1118b3f0060b03ca329/frameset.htm]
To check the Budget for every order refer the following link.
[http://aq33.com/quality-management/Articles-003668.html|http://aq33.com/quality-management/Articles-003668.html]
Regards
Makarand Gurjar

Similar Messages

  • How to set the correct shared pool size and db_buffer_cache using awr

    Hi All,
    I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
    Shared Pool Advisory
    * SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
    * Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
    Shared Pool Size(M)     SP Size Factr     Est LC Size (M)     Est LC Mem Obj     Est LC Time Saved (s)     Est LC Time Saved Factr     Est LC Load Time (s)     Est LC Load Time Factr     Est LC Mem Obj Hits (K)
    4,096     1.00     471     25,153     184,206     1.00     149     1.00     9,069
    4,736     1.16     511     27,328     184,206     1.00     149     1.00     9,766
    5,248     1.28     511     27,346     184,206     1.00     149     1.00     9,766
    5,760     1.41     511     27,346     184,206     1.00     149     1.00     9,766
    6,272     1.53     511     27,346     184,206     1.00     149     1.00     9,766
    6,784     1.66     511     27,346     184,206     1.00     149     1.00     9,766
    7,296     1.78     511     27,346     184,206     1.00     149     1.00     9,766
    7,808     1.91     511     27,346     184,206     1.00     149     1.00     9,766
    8,320     2.03     511     27,346     184,206     1.00     149     1.00     9,766
    Buffer Pool Advisory
    * Only rows with estimated physical reads >0 are displayed
    * ordered by Block Size, Buffers For Estimate
    P     Size for Est (M)     Size Factor     Buffers (thousands)     Est Phys Read Factor     Estimated Phys Reads (thousands)     Est Phys Read Time     Est %DBtime for Rds
    D     4,096     0.10     485     1.02     1,002     1     0.00
    D     8,192     0.20     970     1.00     987     1     0.00
    D     12,288     0.30     1,454     1.00     987     1     0.00
    D     16,384     0.40     1,939     1.00     987     1     0.00
    D     20,480     0.50     2,424     1.00     987     1     0.00
    D     24,576     0.60     2,909     1.00     987     1     0.00
    D     28,672     0.70     3,394     1.00     987     1     0.00
    D     32,768     0.80     3,878     1.00     987     1     0.00
    D     36,864     0.90     4,363     1.00     987     1     0.00
    D     40,960     1.00     4,848     1.00     987     1     0.00
    D     45,056     1.10     5,333     1.00     987     1     0.00
    D     49,152     1.20     5,818     1.00     987     1     0.00
    D     53,248     1.30     6,302     1.00     987     1     0.00
    D     57,344     1.40     6,787     1.00     987     1     0.00
    D     61,440     1.50     7,272     1.00     987     1     0.00
    D     65,536     1.60     7,757     1.00     987     1     0.00
    D     69,632     1.70     8,242     1.00     987     1     0.00
    D     73,728     1.80     8,726     1.00     987     1     0.00
    D     77,824     1.90     9,211     1.00     987     1     0.00
    D     81,920     2.00     9,696     1.00     987     1     0.00
    My shared pool size is 4gb and db_cache_size is 40Gb.
    Please help me in configuring the correct size for this.
    Thanks and Regards,

    Hi ,
    Actually batch load is taking too much time.
    Please find below the 1 hr awr report
         Snap Id     Snap Time     Sessions     Cursors/Session
    Begin Snap:     6557     27-Nov-11 16:00:06     126     1.3
    End Snap:     6558     27-Nov-11 17:00:17     130     1.6
    Elapsed:          60.17 (mins)          
    DB Time:          34.00 (mins)          
    Report Summary
    Cache Sizes
         Begin     End          
    Buffer Cache:     40,960M     40,960M     Std Block Size:     8K
    Shared Pool Size:     4,096M     4,096M     Log Buffer:     25,908K
    Load Profile
         Per Second     Per Transaction     Per Exec     Per Call
    DB Time(s):     0.6     1.4     0.00     0.07
    DB CPU(s):     0.5     1.2     0.00     0.06
    Redo size:     281,296.9     698,483.4          
    Logical reads:     20,545.6     51,016.4          
    Block changes:     1,879.5     4,667.0          
    Physical reads:     123.7     307.2          
    Physical writes:     66.4     164.8          
    User calls:     8.2     20.4          
    Parses:     309.4     768.4          
    Hard parses:     8.5     21.2          
    W/A MB processed:     1.7     4.3          
    Logons:     0.7     1.6          
    Executes:     1,235.9     3,068.7          
    Rollbacks:     0.0     0.0          
    Transactions:     0.4               
    Instance Efficiency Percentages (Target 100%)
    Buffer Nowait %:     100.00     Redo NoWait %:     100.00
    Buffer Hit %:     99.66     In-memory Sort %:     100.00
    Library Hit %:     99.19     Soft Parse %:     97.25
    Execute to Parse %:     74.96     Latch Hit %:     99.97
    Parse CPU to Parse Elapsd %:     92.41     % Non-Parse CPU:     98.65
    Shared Pool Statistics
         Begin     End
    Memory Usage %:     80.33     82.01
    % SQL with executions>1:     90.90     86.48
    % Memory for SQL w/exec>1:     90.10     86.89
    Top 5 Timed Foreground Events
    Event     Waits     Time(s)     Avg wait (ms)     % DB time     Wait Class
    DB CPU          1,789          87.72     
    db file sequential read     27,531     50     2     2.45     User I/O
    db file scattered read     26,322     30     1     1.47     User I/O
    row cache lock     1,798     20     11     0.96     Concurrency
    OJVM: Generic     36     15     421     0.74     Other
    Host CPU (CPUs: 24 Cores: 12 Sockets: )
    Load Average Begin     Load Average End     %User     %System     %WIO     %Idle
    0.58     1.50     2.8     0.7     0.1     96.6
    Instance CPU
    %Total CPU     %Busy CPU     %DB time waiting for CPU (Resource Manager)
    2.2     63.6     0.0
    Memory Statistics
         Begin     End
    Host Mem (MB):     131,072.0     131,072.0
    SGA use (MB):     50,971.4     50,971.4
    PGA use (MB):     545.5     1,066.3
    % Host Mem used for SGA+PGA:     39.30     39.70
    RAC Statistics
         Begin     End
    Number of Instances:     2     2
    Global Cache Load Profile
         Per Second     Per Transaction
    Global Cache blocks received:     3.09     7.68
    Global Cache blocks served:     1.86     4.62
    GCS/GES messages received:     78.64     195.27
    GCS/GES messages sent:     53.82     133.65
    DBWR Fusion writes:     0.52     1.30
    Estd Interconnect traffic (KB)     65.50     
    Global Cache Efficiency Percentages (Target local+remote 100%)
    Buffer access - local cache %:     99.65
    Buffer access - remote cache %:     0.02
    Buffer access - disk %:     0.34
    Global Cache and Enqueue Services - Workload Characteristics
    Avg global enqueue get time (ms):     0.0
    Avg global cache cr block receive time (ms):     1.7
    Avg global cache current block receive time (ms):     1.0
    Avg global cache cr block build time (ms):     0.0
    Avg global cache cr block send time (ms):     0.0
    Global cache log flushes for cr blocks served %:     1.4
    Avg global cache cr block flush time (ms):     0.9
    Avg global cache current block pin time (ms):     0.0
    Avg global cache current block send time (ms):     0.0
    Global cache log flushes for current blocks served %:     0.1
    Avg global cache current block flush time (ms):     0.0
    Global Cache and Enqueue Services - Messaging Statistics
    Avg message sent queue time (ms):     0.0
    Avg message sent queue time on ksxp (ms):     0.4
    Avg message received queue time (ms):     0.5
    Avg GCS message process time (ms):     0.0
    Avg GES message process time (ms):     0.0
    % of direct sent messages:     79.13
    % of indirect sent messages:     17.10
    % of flow controlled messages:     3.77
    Cluster Interconnect
         Begin      End
    Interface     IP Address     Pub     Source     IP     Pub     Src
    en9     10.51.10.61     N     Oracle Cluster Repository               
    Main Report
    * Report Summary
    * Wait Events Statistics
    * SQL Statistics
    * Instance Activity Statistics
    * IO Stats
    * Buffer Pool Statistics
    * Advisory Statistics
    * Wait Statistics
    * Undo Statistics
    * Latch Statistics
    * Segment Statistics
    * Dictionary Cache Statistics
    * Library Cache Statistics
    * Memory Statistics
    * Streams Statistics
    * Resource Limit Statistics
    * Shared Server Statistics
    * init.ora Parameters
    More RAC Statistics
    * RAC Report Summary
    * Global Messaging Statistics
    * Global CR Served Stats
    * Global CURRENT Served Stats
    * Global Cache Transfer Stats
    * Interconnect Stats
    * Dynamic Remastering Statistics
    Back to Top
    Statistic Name     Time (s)     % of DB Time
    sql execute elapsed time     1,925.20     94.38
    DB CPU     1,789.38     87.72
    connection management call elapsed time     99.65     4.89
    PL/SQL execution elapsed time     89.81     4.40
    parse time elapsed     46.32     2.27
    hard parse elapsed time     25.01     1.23
    Java execution elapsed time     21.24     1.04
    PL/SQL compilation elapsed time     11.92     0.58
    failed parse elapsed time     9.37     0.46
    hard parse (sharing criteria) elapsed time     8.71     0.43
    sequence load elapsed time     0.06     0.00
    repeated bind elapsed time     0.02     0.00
    hard parse (bind mismatch) elapsed time     0.01     0.00
    DB time     2,039.77     
    background elapsed time     122.00     
    background cpu time     113.42     
    Statistic     Value     End Value
    NUM_LCPUS     0     
    NUM_VCPUS     0     
    AVG_BUSY_TIME     12,339     
    AVG_IDLE_TIME     348,838     
    AVG_IOWAIT_TIME     221     
    AVG_SYS_TIME     2,274     
    AVG_USER_TIME     9,944     
    BUSY_TIME     299,090     
    IDLE_TIME     8,375,051     
    IOWAIT_TIME     6,820     
    SYS_TIME     57,512     
    USER_TIME     241,578     
    LOAD     1     2
    OS_CPU_WAIT_TIME     312,200     
    PHYSICAL_MEMORY_BYTES     137,438,953,472     
    NUM_CPUS     24     
    NUM_CPU_CORES     12     
    GLOBAL_RECEIVE_SIZE_MAX     1,310,720     
    GLOBAL_SEND_SIZE_MAX     1,310,720     
    TCP_RECEIVE_SIZE_DEFAULT     16,384     
    TCP_RECEIVE_SIZE_MAX     9,223,372,036,854,775,807     
    TCP_RECEIVE_SIZE_MIN     4,096     
    TCP_SEND_SIZE_DEFAULT     16,384     
    TCP_SEND_SIZE_MAX     9,223,372,036,854,775,807     
    TCP_SEND_SIZE_MIN     4,096     
    Back to Wait Events Statistics
    Back to Top
    Operating System Statistics - Detail
    Snap Time     Load     %busy     %user     %sys     %idle     %iowait
    27-Nov 16:00:06     0.58                         
    27-Nov 17:00:17     1.50     3.45     2.79     0.66     96.55     0.08
    Back to Wait Events Statistics
    Back to Top
    Foreground Wait Class
    * s - second, ms - millisecond - 1000th of a second
    * ordered by wait time desc, waits desc
    * %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
    * Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
    * Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
    Wait Class     Waits     %Time -outs     Total Wait Time (s)     Avg wait (ms)     %DB time
    DB CPU               1,789          87.72
    User I/O     61,229     0     92     1     4.49
    Other     102,743     40     31     0     1.50
    Concurrency     3,169     10     24     7     1.16
    Cluster     58,920     0     11     0     0.52
    System I/O     45,407     0     6     0     0.29
    Configuration     107     7     1     5     0.03
    Commit     383     0     0     1     0.01
    Network     15,275     0     0     0     0.00
    Application     52     8     0     0     0.00
    Back to Wait Events Statistics
    Back to Top
    Foreground Wait Events
    * s - second, ms - millisecond - 1000th of a second
    * Only events with Total Wait Time (s) >= .001 are shown
    * ordered by wait time desc, waits desc (idle events last)
    * %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
    Event     Waits     %Time -outs     Total Wait Time (s)     Avg wait (ms)     Waits /txn     % DB time
    db file sequential read     27,531     0     50     2     18.93     2.45
    db file scattered read     26,322     0     30     1     18.10     1.47
    row cache lock     1,798     0     20     11     1.24     0.96
    OJVM: Generic     36     42     15     421     0.02     0.74
    db file parallel read     394     0     7     19     0.27     0.36
    control file sequential read     22,248     0     6     0     15.30     0.28
    reliable message     4,439     0     4     1     3.05     0.18
    gc current grant busy     7,597     0     3     0     5.22     0.16
    PX Deq: Slave Session Stats     2,661     0     3     1     1.83     0.16
    DFS lock handle     3,208     0     3     1     2.21     0.16
    direct path write temp     4,842     0     3     1     3.33     0.15
    library cache load lock     39     0     3     72     0.03     0.14
    gc cr multi block request     37,008     0     3     0     25.45     0.14
    IPC send completion sync     5,451     0     2     0     3.75     0.10
    gc cr block 2-way     4,669     0     2     0     3.21     0.09
    enq: PS - contention     3,183     33     1     0     2.19     0.06
    gc cr grant 2-way     5,151     0     1     0     3.54     0.06
    direct path read temp     1,722     0     1     1     1.18     0.05
    gc current block 2-way     1,807     0     1     0     1.24     0.03
    os thread startup     6     0     1     108     0.00     0.03
    name-service call wait     12     0     1     47     0.01     0.03
    PX Deq: Signal ACK RSG     2,046     50     0     0     1.41     0.02
    log file switch completion     3     0     0     149     0.00     0.02
    rdbms ipc reply     3,610     0     0     0     2.48     0.02
    gc current grant 2-way     1,432     0     0     0     0.98     0.02
    library cache pin     903     32     0     0     0.62     0.02
    PX Deq: reap credit     35,815     100     0     0     24.63     0.01
    log file sync     383     0     0     1     0.26     0.01
    Disk file operations I/O     405     0     0     0     0.28     0.01
    library cache lock     418     3     0     0     0.29     0.01
    kfk: async disk IO     23,159     0     0     0     15.93     0.01
    gc current block busy     4     0     0     35     0.00     0.01
    gc current multi block request     1,206     0     0     0     0.83     0.01
    ges message buffer allocation     38,526     0     0     0     26.50     0.00
    enq: FB - contention     131     0     0     0     0.09     0.00
    undo segment extension     8     100     0     6     0.01     0.00
    CSS initialization     8     0     0     6     0.01     0.00
    SQL*Net message to client     14,600     0     0     0     10.04     0.00
    enq: HW - contention     96     0     0     0     0.07     0.00
    CSS operation: action     8     0     0     4     0.01     0.00
    gc cr block busy     33     0     0     1     0.02     0.00
    latch free     30     0     0     1     0.02     0.00
    enq: TM - contention     49     6     0     0     0.03     0.00
    enq: JQ - contention     19     100     0     1     0.01     0.00
    SQL*Net more data to client     666     0     0     0     0.46     0.00
    asynch descriptor resize     3,179     100     0     0     2.19     0.00
    latch: shared pool     3     0     0     3     0.00     0.00
    CSS operation: query     24     0     0     0     0.02     0.00
    PX Deq: Signal ACK EXT     72     0     0     0     0.05     0.00
    KJC: Wait for msg sends to complete     269     0     0     0     0.19     0.00
    latch: object queue header operation     4     0     0     1     0.00     0.00
    gc cr block congested     5     0     0     0     0.00     0.00
    utl_file I/O     11     0     0     0     0.01     0.00
    enq: TO - contention     3     33     0     0     0.00     0.00
    SQL*Net message from client     14,600     0     219,478     15033     10.04     
    jobq slave wait     7,726     100     3,856     499     5.31     
    PX Deq: Execution Msg     10,556     19     50     5     7.26     
    PX Deq: Execute Reply     2,946     31     27     9     2.03     
    PX Deq: Parse Reply     3,157     35     3     1     2.17     
    PX Deq: Join ACK     2,976     28     2     1     2.05     
    PX Deq Credit: send blkd     7     14     0     4     0.00     
    Back to Wait Events Statistics
    Back to Top
    Background Wait Events
    * ordered by wait time desc, waits desc (idle events last)
    * Only events with Total Wait Time (s) >= .001 are shown
    * %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
    Event     Waits     %Time -outs     Total Wait Time (s)     Avg wait (ms)     Waits /txn     % bg time
    os thread startup     140     0     13     90     0.10     10.35
    db file parallel write     8,233     0     6     1     5.66     5.08
    log file parallel write     3,906     0     6     1     2.69     4.62
    log file sequential read     350     0     5     16     0.24     4.49
    control file sequential read     13,737     0     5     0     9.45     3.72
    DFS lock handle     2,990     27     2     1     2.06     1.43
    db file sequential read     921     0     2     2     0.63     1.39
    SQL*Net break/reset to client     18     0     1     81     0.01     1.19
    control file parallel write     2,455     0     1     1     1.69     1.12
    ges lms sync during dynamic remastering and reconfig     24     100     1     50     0.02     0.98
    library cache load lock     35     0     1     24     0.02     0.68
    ASM file metadata operation     3,483     0     1     0     2.40     0.65
    enq: CO - master slave det     1,203     100     1     0     0.83     0.46
    kjbdrmcvtq lmon drm quiesce: ping completion     9     0     1     62     0.01     0.46
    enq: WF - contention     11     0     0     35     0.01     0.31
    CGS wait for IPC msg     32,702     100     0     0     22.49     0.19
    gc object scan     28,788     100     0     0     19.80     0.15
    row cache lock     535     0     0     0     0.37     0.14
    library cache pin     370     55     0     0     0.25     0.12
    ksxr poll remote instances     19,119     100     0     0     13.15     0.11
    name-service call wait     6     0     0     19     0.00     0.10
    gc current block 2-way     304     0     0     0     0.21     0.09
    gc cr block 2-way     267     0     0     0     0.18     0.08
    gc cr grant 2-way     355     0     0     0     0.24     0.08
    ges LMON to get to FTDONE     3     100     0     24     0.00     0.06
    enq: CF - contention     145     76     0     0     0.10     0.05
    PX Deq: reap credit     8,842     100     0     0     6.08     0.05
    reliable message     126     0     0     0     0.09     0.05
    db file scattered read     19     0     0     3     0.01     0.05
    library cache lock     162     1     0     0     0.11     0.04
    latch: shared pool     2     0     0     27     0.00     0.04
    Disk file operations I/O     504     0     0     0     0.35     0.04
    gc current grant busy     148     0     0     0     0.10     0.04
    gcs log flush sync     84     0     0     1     0.06     0.04
    ges message buffer allocation     24,934     0     0     0     17.15     0.02
    enq: CR - block range reuse ckpt     83     0     0     0     0.06     0.02
    latch free     22     0     0     1     0.02     0.02
    CSS operation: action     13     0     0     2     0.01     0.02
    CSS initialization     4     0     0     6     0.00     0.02
    direct path read     1     0     0     21     0.00     0.02
    rdbms ipc reply     153     0     0     0     0.11     0.01
    db file parallel read     2     0     0     8     0.00     0.01
    direct path write     5     0     0     3     0.00     0.01
    gc current multi block request     49     0     0     0     0.03     0.01
    gc current block busy     5     0     0     2     0.00     0.01
    enq: PS - contention     24     50     0     0     0.02     0.01
    gc cr multi block request     54     0     0     0     0.04     0.01
    ges generic event     1     100     0     10     0.00     0.01
    gc current grant 2-way     35     0     0     0     0.02     0.01
    kfk: async disk IO     183     0     0     0     0.13     0.01
    Log archive I/O     3     0     0     2     0.00     0.01
    gc buffer busy acquire     2     0     0     3     0.00     0.00
    LGWR wait for redo copy     123     0     0     0     0.08     0.00
    IPC send completion sync     18     0     0     0     0.01     0.00
    enq: TA - contention     11     0     0     0     0.01     0.00
    read by other session     2     0     0     2     0.00     0.00
    enq: TM - contention     9     89     0     0     0.01     0.00
    latch: ges resource hash list     135     0     0     0     0.09     0.00
    PX Deq: Slave Session Stats     12     0     0     0     0.01     0.00
    KJC: Wait for msg sends to complete     89     0     0     0     0.06     0.00
    enq: TD - KTF dump entries     8     0     0     0     0.01     0.00
    enq: US - contention     7     0     0     0     0.00     0.00
    CSS operation: query     12     0     0     0     0.01     0.00
    enq: TK - Auto Task Serialization     6     100     0     0     0.00     0.00
    PX Deq: Signal ACK RSG     24     50     0     0     0.02     0.00
    log file single write     6     0     0     0     0.00     0.00
    enq: WL - contention     2     100     0     1     0.00     0.00
    ADR block file read     13     0     0     0     0.01     0.00
    ADR block file write     5     0     0     0     0.00     0.00
    latch: object queue header operation     1     0     0     1     0.00     0.00
    gc cr block busy     1     0     0     1     0.00     0.00
    rdbms ipc message     103,276     67     126,259     1223     71.03     
    PX Idle Wait     6,467     67     12,719     1967     4.45     
    wait for unread message on broadcast channel     7,240     100     7,221     997     4.98     
    gcs remote message     218,809     84     7,213     33     150.49     
    DIAG idle wait     203,228     95     7,185     35     139.77     
    shared server idle wait     121     100     3,630     30000     0.08     
    ASM background timer     3,343     0     3,611     1080     2.30     
    Space Manager: slave idle wait     723     100     3,610     4993     0.50     
    heartbeat monitor sleep     722     100     3,610     5000     0.50     
    ges remote message     73,089     52     3,609     49     50.27     
    dispatcher timer     66     88     3,608     54660     0.05     
    pmon timer     1,474     82     3,607     2447     1.01     
    PING     1,487     19     3,607     2426     1.02     
    Streams AQ: qmn slave idle wait     125     0     3,594     28754     0.09     
    Streams AQ: qmn coordinator idle wait     250     50     3,594     14377     0.17     
    smon timer     18     50     3,505     194740     0.01     
    JOX Jit Process Sleep     73     100     976     13370     0.05     
    class slave wait     56     0     605     10806     0.04     
    KSV master wait     2,215     98     1     0     1.52     
    SQL*Net message from client     109     0     0     2     0.07     
    PX Deq: Parse Reply     27     44     0     1     0.02     
    PX Deq: Join ACK     30     40     0     1     0.02     
    PX Deq: Execute Reply     20     30     0     0     0.01     
    Streams AQ: RAC qmn coordinator idle wait     259     100     0     0     0.18     
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram
    * Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
    * % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
    * % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
    * Ordered by Event (idle events last)
              % of Waits
    Event     Total Waits     <1ms     <2ms     <4ms     <8ms     <16ms     <32ms     <=1s     >1s
    ADR block file read     13     100.0                                   
    ADR block file write     5     100.0                                   
    ADR file lock     6     100.0                                   
    ARCH wait for archivelog lock     3     100.0                                   
    ASM file metadata operation     3483     99.6     .1     .1                    .2     
    CGS wait for IPC msg     32.7K     100.0                                   
    CSS initialization     12     50.0                    50.0               
    CSS operation: action     21     28.6     9.5          61.9                    
    CSS operation: query     36     86.1     5.6     8.3                         
    DFS lock handle     6198     98.6     1.2     .1                    .1     
    Disk file operations I/O     909     95.7     3.6     .7                         
    IPC send completion sync     5469     99.9     .1     .0     .0                    
    KJC: Wait for msg sends to complete     313     100.0                                   
    LGWR wait for redo copy     122     100.0                                   
    Log archive I/O     3     66.7               33.3                    
    OJVM: Generic     36     55.6                              44.4     
    PX Deq: Signal ACK EXT     72     98.6     1.4                              
    PX Deq: Signal ACK RSG     2070     99.7               .0     .1     .0     .1     
    PX Deq: Slave Session Stats     2673     99.7     .2                         .1     .0
    PX Deq: reap credit     44.7K     100.0                                   
    SQL*Net break/reset to client     20     95.0                                   5.0
    SQL*Net message to client     14.7K     100.0                                   
    SQL*Net more data from client     32     100.0                                   
    SQL*Net more data to client     689     100.0                                   
    asynch descriptor resize     3387     100.0                                   
    buffer busy waits     2     100.0                                   
    control file parallel write     2455     96.6     2.2     .6     .6          .1          
    control file sequential read     36K     99.4     .3     .1     .1     .1     .1     .0     
    db file parallel read     397     8.8     .8     5.5     12.6     17.4     46.3     8.6     
    db file parallel write     8233     85.4     10.3     2.3     1.4     .4     .1          
    db file scattered read     26.3K     79.2     1.5     8.2     10.5     .6     .1     .0     
    db file sequential read     28.4K     60.2     3.3     18.0     18.1     .3     .1     .0     
    db file single write     2     100.0                                   
    direct path read     2     50.0                         50.0          
    direct path read temp     1722     95.8     2.8     .1     .5     .8     .1          
    direct path write     6     83.3                    16.7               
    direct path write temp     4842     96.3     2.7     .5     .2     .0     .0     .2     
    enq: AF - task serialization     1     100.0                                   
    enq: CF - contention     145     99.3     .7                              
    enq: CO - master slave det     1203     98.9     .8     .2                         
    enq: CR - block range reuse ckpt     83     100.0                                   
    enq: DR - contention     2     100.0                                   
    enq: FB - contention     131     100.0                                   
    enq: HW - contention     97     100.0                                   
    enq: JQ - contention     19     89.5     10.5                              
    enq: JS - job run lock - synchronize     3     100.0                                   
    enq: MD - contention     1     100.0                                   
    enq: MW - contention     2     100.0                                   
    enq: PS - contention     3207     99.5     .4     .1                         
    enq: TA - contention     11     100.0                                   
    enq: TD - KTF dump entries     8     100.0                                   
    enq: TK - Auto Task Serialization     6     100.0                                   
    enq: TM - contention     58     100.0                                   
    enq: TO - contention     3     100.0                                   
    enq: TQ - DDL contention     1     100.0                                   
    enq: TS - contention     1     100.0                                   
    enq: UL - contention     1     100.0                                   
    enq: US - contention     7     100.0                                   
    enq: WF - contention     11     81.8                              18.2     
    enq: WL - contention     2     50.0     50.0                              
    gc buffer busy acquire     2     50.0               50.0                    
    gc cr block 2-way     4934     99.9     .1                    .0     .0     
    gc cr block busy     35     68.6     31.4                              
    gc cr block congested     6     100.0                                   
    gc cr disk read     2     100.0                                   
    gc cr grant 2-way     4824     100.0     .0                              
    gc cr grant congested     2     100.0                                   
    gc cr multi block request     37.1K     99.8     .2     .0     .0     .0     .0     .0     
    gc current block 2-way     2134     99.9     .0                         .0     
    gc current block busy     7     14.3     14.3          14.3          28.6     28.6     
    gc current block congested     2     100.0                                   
    gc current grant 2-way     1337     99.9     .1                              
    gc current grant busy     7123     99.2     .2     .2     .0     .0     .3     .1     
    gc current grant congested     2     100.0                                   
    gc current multi block request     1260     99.8     .2                              
    gc object scan     28.8K     100.0                                   
    gcs log flush sync     65     95.4          3.1     1.5                    
    ges LMON to get to FTDONE     3                              100.0          
    ges generic event     1                         100.0               
    ges inquiry response     2     100.0                                   
    ges lms sync during dynamic remastering and reconfig     24                         16.7     29.2     54.2     
    ges message buffer allocation     63.1K     100.0                                   
    kfk: async disk IO     23.3K     100.0     .0     .0                         
    kjbdrmcvtq lmon drm quiesce: ping completion     9     11.1                              88.9     
    ksxr poll remote instances     19.1K     100.0                                   
    latch free     52     59.6     40.4                              
    latch: call allocation     2     100.0                                   
    latch: gc element     1     100.0                                   
    latch: gcs resource hash     1     100.0                                   
    latch: ges resource hash list     135     100.0                                   
    latch: object queue header operation     5     40.0     40.0     20.0                         
    latch: shared pool     5     40.0                    20.0     20.0     20.0     
    library cache load lock     74     9.5     5.4     8.1     17.6     10.8     13.5     35.1     
    library cache lock     493     99.2     .4     .4                         
    library cache pin     1186     98.4     .3     1.2     .1                    
    library cache: mutex X     6     100.0                                   
    log file parallel write     3897     72.9     1.5     17.1     7.5     .6     .3     .1     
    log file sequential read     350     4.6               3.1     59.4     30.0     2.9     
    log file single write     6     100.0                                   
    log file switch completion     3                         33.3          66.7     
    log file sync     385     90.4     3.6     4.7     .8     .5               
    name-service call wait     18          5.6     5.6     5.6     16.7     44.4     22.2     
    os thread startup     146                                   100.0     
    rdbms ipc reply     3763     99.7     .3                              
    read by other session     2     50.0          50.0                         
    reliable message     4565     99.7     .2     .0               .0     .1     
    row cache lock     2334     99.3     .2     .1                    .1     .3
    undo segment extension     8     50.0                    37.5     12.5          
    utl_file I/O     11     100.0                                   
    ASM background timer     3343     57.0     .3     .1     .1     .1          21.1     21.4
    DIAG idle wait     203.2K     3.4     .2     .4     18.0     41.4     14.8     21.8     
    JOX Jit Process Sleep     73                                   2.7     97.3
    KSV master wait     2213     99.4     .1     .2                    .3     
    PING     1487     81.0                                   19.0
    PX Deq Credit: send blkd     7     57.1          14.3     14.3          14.3          
    PX Deq: Execute Reply     2966     59.8     .8     9.5     5.6     10.2     2.6     11.4     
    PX Deq: Execution Msg     10.6K     72.4     12.1     2.6     2.5     .1     5.6     4.6     .0
    PX Deq: Join ACK     3006     77.9     22.1     .1                         
    PX Deq: Parse Reply     3184     67.1     31.1     1.6     .2                    
    PX Idle Wait     6466     .2     8.7     4.3     4.8     .3     .1     5.0     76.6
    SQL*Net message from client     14.7K     72.4     2.8     .8     .5     .9     .4     2.8     19.3
    Space Manager: slave idle wait     722                                        100.0
    Streams AQ: RAC qmn coordinator idle wait     259     100.0                                   
    Streams AQ: qmn coordinator idle wait     250     50.0                                   50.0
    Streams AQ: qmn slave idle wait     125                                        100.0
    class slave wait     55     67.3          7.3     1.8     5.5     1.8     7.3     9.1
    dispatcher timer     66     6.1                                   93.9
    gcs remote message     218.6K     7.7     1.8     1.2     1.6     1.7     15.7     70.3     
    ges remote message     72.9K     29.7     5.1     2.7     2.2     1.5     4.0     54.7     
    heartbeat monitor sleep     722                                        100.0
    jobq slave wait     7725                    .1          .0     99.9     
    pmon timer     1474     18.4                                   81.6
    rdbms ipc message     103.3K     20.7     2.7     1.5     1.3     .9     .7     40.7     31.6
    shared server idle wait     121                                        100.0
    smon timer     18                                        100.0
    wait for unread message on broadcast channel     7238                         .3          99.7     
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram Detail (64 msec to 2 sec)
    * Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
    * Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
    * % of Total Waits: total waits for all wait classes, including Idle
    * % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
    * Ordered by Event (only non-idle events are displayed)
              % of Total Waits
    Event     Waits 64ms to 2s     <32ms     <64ms     <1/8s     <1/4s     <1/2s     <1s     <2s     >=2s
    ASM file metadata operation     6     99.8          .1     .1                    
    DFS lock handle     6     99.9               .1     .0               
    OJVM: Generic     16     55.6               2.8          41.7          
    PX Deq: Signal ACK RSG     3     99.9     .0     .1                         
    PX Deq: Slave Session Stats     3     99.9          .0               .0     .0     
    SQL*Net break/reset to client     1     95.0                              5.0     
    control file sequential read     1     100.0          .0                         
    db file parallel read     34     91.4     8.6                              
    db file scattered read     4     100.0     .0          .0                    
    db file sequential read     6     100.0     .0     .0     .0                    
    direct path write temp     11     99.8     .1     .1     .0                    
    enq: WF - contention     2     81.8               18.2                    
    gc cr block 2-way     1     100.0          .0                         
    gc cr multi block request     1     100.0          .0                         
    gc current block 2-way     1     100.0     .0                              
    gc current block busy     2     71.4     28.6                              
    gc current grant busy     8     99.9     .0     .1                         
    ges lms sync during dynamic remastering and reconfig     13     45.8     20.8     33.3                         
    kjbdrmcvtq lmon drm quiesce: ping completion     8     11.1     11.1     77.8                         
    latch: shared pool     1     80.0     20.0                              
    library cache load lock     26     64.9     14.9     12.2     4.1     4.1               
    log file parallel write     2     99.9     .0               .0               
    log file sequential read     10     97.1     2.0     .6     .3                    
    log file switch completion     2     33.3               66.7                    
    name-service call wait     4     77.8          22.2                         
    os thread startup     146               100.0                         
    reliable message     4     99.9          .0               .1          
    row cache lock     2     99.7                    .0     .0          .3
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram Detail (4 sec to 2 min)
    * Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
    * Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
    * % of Total Waits: total waits for all wait classes, including Idle
    * % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
    * Ordered by Event (only non-idle events are displayed)
              % of Total Waits
    Event     Waits 4s to 2m     <2s     <4s     <8s     <16s     <32s     < 1m     < 2m     >=2m
    row cache lock     6     99.7     .3                              
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram Detail (4 min to 1 hr)
    No data exists for this section of the report.
    Back to Wait Events Statistics
    Back to Top
    Service Statistics
    * ordered by DB Time
    Service Name     DB Time (s)     DB CPU (s)     Physical Reads (K)     Logical Reads (K)
    ubshost     1,934     1,744     445     73,633
    SYS$USERS     105     45     1     404
    SYS$BACKGROUND     0     0     1     128
    ubshostXDB     0     0     0     0
    Back to Wait Events Statistics
    Back to Top
    Service Wait Class Stats
    * Wait Class info for services in the Service Statistics section.
    * Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
    * Time Waited (Wt Time) in seconds
    Service Name     User I/O Total Wts     User I/O Wt Time     Concurcy Total Wts     Concurcy Wt Time     Admin Total Wts     Admin Wt Time     Network Total Wts     Network Wt Time
    ubshost      60232     90     2644     4     0     0     13302     0
    SYS$USERS      997     2     525     19     0     0     1973     0
    SYS$BACKGROUND      1456     2     1258     14     0     0     0     0
    I am not able to paste the whole awr report. I have paste some of the sections of awr report.
    Please help.
    Thanks and Regards,

  • How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

    Hi
    I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
    The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
    Does anybody know where this file went or can somebody tell me an alternative place to get this file?
    Jacob

    Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
    Hope that works!
    Elise

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • How to set cookie value in one page and retrieve in another page using setA

    How to set cookie value in one page and retrieve in another page using setActionListener?
    I have tried with following code srcpage.jspx->destpage.jspx
    srcpage.jspx
    <af:table value="#{bindings.DepartmentsView1.collectionModel}"
    var="emp" rows="#{bindings.EMPView1.rangeSize}"
    first="#{bindings.EMPView1.rangeStart}"
    emptyText="#{bindings.DepartmentsView1.viewable ? 'No rows yet.' : 'Access Denied.'}">
    <af:column sortProperty="EmployeeName" sortable="false"
    headerText="Cookie Testing">
    <af:commandLink text="#{emp.EmployeeName}" action="success">
    <af:setActionListener from="#{emp.EmployeeName}"
    to="#{cookie}"/>
    </af:commandLink>
    </af:column>
    </af:table>
    espage.jspx
    <af:outputText value="Test Cookie Value: #{cookie}"/>
    ,Here Test Cookie Value prints the following instead of its original String value
    {JSESSIONID=javax.servlet.http.Cookie@7da288, oracle.uix=javax.servlet.http.Cookie@399f62}
    I have passed employee name "Robert" to cookie in srcpage.jspx,but it prints "JSESSIONID....." instead of "Robert" in destpage.jspx
    Thanks in advance
    Kalee

    Hi,
    "cookie" is a reserved name. If you want to write to a session scope attribute called "cookie" then you have to call #{sessionScope.cookie}. If you want to use EL to set and read from cookies then you will have to use
    #{cookie.cookieName}
    Note that #{cookie} writes to and returns a map
    check this: http://www.informit.com/articles/article.aspx?p=30946&seqNum=7
    Frank

  • How to set password for a zip file and should be checked when reading that

    Hi friends,
    how to set password for a zip file and should be checked when reading that file???
    thanks.
    Praveen Reddy.J

    Heyy man, i think, u did not get my problem.
    all i have to do is:
    i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
    Tanks for reply.

  • Can u tell me how to set the color of the button and its border

    hi to all,can u tell me how to set the color of the button and its border

    There are sample code on the java.sun.com
    http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html
    try this web page ... There are lots of examples... Good luck ... "Gan en "

  • Hi, Does anyone know how to set up facetime on my mac and iphone?

    Hi  Does anyone know how to set up facetime on my mac and iphone?

    Page 68 of the user guide:
    http://support.apple.com/manuals/

  • How to set up my new ipod touch and sync my music?

    How to set up my new ipod touch and sync my music?

    You can download a copy of the iPod Touch manual from here which includes a Getting Started chapter. There is also info on syncing music on this page

  • How do i find out what teachers editions and resources are available to compliment etextbooks?

    How do i find out what teachers editions and resources are available to compliment etextbooks?
    I'm researching the possibility of using iPads for our school but I need to make sure that we can get the appropriate teacher resources to go along with the textbooks. Where can I find these?

    I would contact the publisher of the textbook directly.  Apple is just a store, not a publisher.

  • How to set the portlet preference per user instead of global setting

    Hello All
    I am using IBM JSR168/ JSF, In my portlet Edit mode I am trying to set a value per user preference , but it always set for all other users even this is just a normal user, I think when an administrator set any preference value then those preferences value will be set for all the users. but in my case it is a normal user has right for the edit mode and hence the preference set by the user in edit mode will be set for his portlet instance only. So why it sets for all the users preference???...... Thanks a lot for your help!!!
    here is my code:
    ///////////portlet.xml//////////
    <preference>
                        <name>RowsPerPage</name>
                        <value>25</value>
                        <read-only>false</read-only>
                   </preference>/////////////////////////pageCode in edit mode do the save action/////////////////////////
    public String doSaveAction(){     
               FacesContext ctx = FacesContext.getCurrentInstance();
                  HttpSession session = (HttpSession)ctx.getExternalContext().getSession(false);
                  if(session != null) {
                       session.setAttribute("save", "save");
                       session.setAttribute("Number",Integer.toString(getNumber()));
               return "";
    }/////////////////////store the preference value///////
    public class MyPortlet extends FacesGenericPortlet {
    public void processAction(ActionRequest actionRequest, ActionResponse actionResponse) throws PortletException {
              try{               
                //String save1 = actionRequest.getParameter("save");
                String save = (String) actionRequest.getPortletSession().getAttribute("save");
                if (save != null){
                   PortletPreferences prefs = actionRequest.getPreferences();
                   String number= (String) actionRequest.getPortletSession().getAttribute("Number");
                   prefs.setValue("Number", number);
                   prefs.store();
              }

    Hope someone really can help me for this issue... I just wondering is this related to the user group config in portlet, since the interesting is that this issue is not apply to wpsadmin , but not sure where and how to set other user group that can set the preference no problem??
    Thanks for your time !

  • How to set to-mode to Fixed Value and give a date in RSDV transaction

    Hi
             I am working in BI7.0 environment. I am deploying HR Reporting Project. I need to load data to HR Info Cube 0PAPA_C02, to do this I need to maintain validity slice (RSDV transaction) for the Info Cube. After first load I need to set "to-mode-'Fixed Value'" and give a date such as 31.12.9999.
            Can anyone please let me know the steps on how to set- to mode to Fixed Value in RSDV.
    Thanks

    Here's the basic steps to follow:
    1) Go to tcode RSDV, enter the InfoCube name (0PAPA_C02) and Execute.
    2) If there is data already in the InfoCube you will get a validity table with default validty dates from 0CALDAY.
    3) Click on the Display/Change button so that you're in change mode and edit the validity date to be 31.12.9999.
    4) In the To-Mode column, set the value to 'F' for fixed.
    5) Put the fixed date value (31.12.9999 in your example) in Fixed to time.
    6) Click on Save.

  • Plsss help me: how to set default values in html:file and html:radio

    Hai,
    To set default value to text box i use the following code. It works well.
    <html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
    <html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
    how to set default selection in <html:radio>.

    No it won't help.
    You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
    The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
    Bottom line: you can't put a default value into the input type="file" control.
    And a good thing too ;-)

  • Setting the Client Count per WLAN and per AP radio

    Hi
    We use WLC 5508 with 7.4. We tried to set max allowed clients per AP radio to 30 through GUI. We have APs with 80 clients associeted though.
    Has anyone else tried this feature?
    When entering config wlan max-associated-clients max-clients wlan-id we got 
    "WLAN/Guest-Lan/remote-lan is enabled.Please disable to configure max associated clients."
    GUI doesn't show that message, should it?  In GUI, Is it necesary to disable WLAN before too?
    Thanks
    This is the show wlan output

    No, the GUI does some stuff automatically, like disablen/enabling the WLAN when you make the change.
    From teh CLI *you* have to do them.
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • How can set a customized search results template and all users see it

    Hi all ,,,,
    I Added new costume template search result
    And when I added this template it’s added only for the user how created this template ,And I need all users see and use this template can anyone tell how I can add template for search result and all users see it or if I can do synchronies for this template.

    I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
    Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
    Here is the modification of the code:
    <$if customTemplateId and not (baseTemplateId like customTemplateId)$>
              <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>          
              <!-- Modify START by Oracle-->
         <$else$>
    <!-- here add default fields -->
              <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>
    <!-- here add your custom fields -->
              <$columnsString=columnsString&",xComment"$>
              <!-- Modify END by Oracle-->
         <$endif$>

Maybe you are looking for

  • How can I restore an iTunes playlist from iPod Classic to iTunes INCLUDING folders and playlists?

    Afrikaans Albanian Arabic Armenian Azerbaijani Basque Belarusian Bulgarian Catalan Chinese (Simplified) Chinese (Traditional) Croatian Czech Danish Detect language Dutch English Estonian Filipino Finnish French Galician Georgian German Greek Haitian

  • Using package call in insert statement.

    insert into as_portal_credentials_test values('id', 'key','expid',UTL_RAW.CAST_TO_RAW('zTMwv2.[[?~d'))                                                                                                                                                    

  • Apps for SharePoint in intranet environment

    Hi All SharePoint Gurus, I am new to App development. Is the Developer Site mandatory if needs to deploy using Visual Studio 2013?  Regards, Khushi

  • Bluetooth is not working in my macbook pro

    Hello, I just bought a new macbook pro and i am trying to use the bluetooth to comunicate with other devices,  but  my mac  can´t detect other devices with bluetooth, i don´t think it´s broken, what should i do? Help.. Tavo...

  • How to Lock iPhone opened app

    At one time, I saw a way to lock the iPhone 4 with an app open. It wasn't some external app, but came with an update. You had to do a certain button push or combination. Does anyone remember?