How to set up multiple log4j configurations for multiple WAR packages?

hi all,
the EAR that i am trying to deploy has multiple WARs.
I need to configure separate loggers for each these WARs.
Could any of experts can help me out.

Hi
Depending on your needs, you may find that Set level offers the best approach:
Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
CCT

Similar Messages

  • NI9203 - Need to know how to set up the FPGA code for multiple NI9203 modules and how to calibrate the data

    Hi. I'm using the NI9203 module to detect pressure, temerature and flow rate of water in a cooling system. I have 17 different inputs coming in therefore i'm using 3 NI9203 modules. I've used the example provided with labview as a base for designing my code. The example can be found here : Program Files\National Instruments\LabVIEW 8.0\examples\CompactRIO\Module Specific\NI 9203.
    I've had no problems when testing this code out for a single NI9203 module but when i add code for 3 modules the code will not compile as my resources are over mapped. Is there a simpler way to program the FPGA code.
    That said how do you go about calibrating the data that's received from the module. Preferably i'd like to write a vi to do the calibrating. Just need help on how to go about writing this vi

    Hi havok,
    Firstly, I would use constants to configure the modules, it'll save some resources on the FPGA.  I'm not typically changing the settings on the fly, so using constants whenever possible helps.  I would also take a look at the following KnowledgeBase article on other changes you can make to the FPGA VI to compile the code:
    http://digital.ni.com/public.nsf/allkb/311C18E2D635FA338625714700664816?OpenDocument
    The best changes you can make are to use fewer arrays and front panel elements.  This can be done by using a DMA FIFO or constants on the block diagram. 
    Now actually calibrating the data will require you to do it on the host side.  There is an example VI called Binary to Nominal that changes the raw data to something more useful for datalogging, display, etc.  It can be found in some of the example VIs, or in the following link:
    http://digital.ni.com/public.nsf/allkb/E86D8D460C4C092F8625752F00050A61?OpenDocument 

  • How to execute a MTS (Master Test Script) in SAP ECATT Test Configuration for multiple variants.

    I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
    Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
    Below thread is similar to my requirement but I am not able to understand the solution properly.
    eCATT - how to run multiple test scripts with input variables in different test scripts?
    Any help in this case would be highly appreciated.
    Thanks & Regards,
    Vaibhav Gupta

    I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
    Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
    Below thread is similar to my requirement but I am not able to understand the solution properly.
    eCATT - how to run multiple test scripts with input variables in different test scripts?
    Any help in this case would be highly appreciated.
    Thanks & Regards,
    Vaibhav Gupta

  • How to set the default settment rule for the same kind project.

    hi experts:
       the project of the same kind of the project profile have the same settment rule to one account (G/L).
    how to set the default settment rule for the project of  this kind of the project profile.
    regards

    Hi,
      You need to define the settlement profile and allocation structure.
    next you need to define the  Strategy for settlement rule.
    navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
    --> Define strategy for settlement rule.
    Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
    Save this transaction.
    Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
    Now run CJB2 transaction for the project, settlement rule will generated automatically.
    even you can configure the same for profitability segment.
    Rgds
    Sudhir Reddy

  • How to set upper and lower limit for service notification in SPRO

    Hello everyone,
    Good morning....!!
    I am new to SAP PM and to SCN as well.
    I have a question on Service notification user status.
    I  have notification profile configured in SAP as below:
    Status no      Status          Short text              Lower limit          Upper limit
    5                  REGD          Registered                1                          70
    10                PCKS            Pack sent                  1                          70
    20                APRC            Application received  1                        70
    etc..
    I want the statusesto be set as  navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
    Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
    for more details please check my attachment.
    Thanks in advance..!!
    Regards,
    Sudha.

    Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
    Just I made replica of your profile. I could able to change (even without saving the order).

  • How can delayed delivery update be configured for Inbound delivery ?

    Hi All,
    How can delayed delivery update be configured for Inbound delivery ?
    There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
    Regards
    Jimmi

    Hello Jimmi,
    Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
    664316 Tips for the delayed delivery update for TO
    I hope this information helps!
    Martin

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to Set A Default Start Time For New Events In Calendar?

    How to Set A Default Start Time For New Events In Calendar?

    John,
    Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
    Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
    Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
    Works just fine. Snippet from the listener follows
    BindingContext bindingContext = BindingContext.getCurrent();+
    *if ( bindingContext != null )    {*+
    DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
    DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
    Row currentRow = iterator.getCurrentRow();+
    if ( currentRow.getAttribute("StartDate") == null)+
    currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
    if (currentRow.getAttribute("EndDate")==null)+
    currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
    *}*

  • How to set a default colour & thickness  for rectangle in preview?

    How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .

    Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.

  • How to set a new SCSI number for a second drive?

    How to set a new SCSI number for a second drive?
    Walter

    Walter,
    This web site gives a good diagram:
    http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
    On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
    AO . .
    A1 . .
    A2 . .
    If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
    If you short out the pins beside AO .__. , you have designated SCSI ID One.
    If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
    If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
    These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
    Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
    Jim
    PS
    CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

  • How to set up different ring tone for Facetime

    how to set up different ring tone for Facetime

    I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

  • How to set a default Billing type for a particular Delivery type

    Dear All,
    How to set a default billing type for a particular delivery type.
    My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
    When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
    Where we have to do this setting?
    In case of normal sales order, this control will be available in the Sales order document types.
    In case STO, how to set a default billing type for a delivery type (NL).
    Regards,
    Rajesh

    There is a customization available here no default or hard coded
    Normally in a sales doc type we mention which billing type system has to pick
    If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
    Go to your delivery type OVLK (say your delivery type is NL)
    In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
    This DL is called PSEUDO order type
    Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
    For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
    Then while you bill the delivery doc of NL system will take ZF8
    For intercompany delivery you can create ZIV billing type also Pure customization
    PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
    Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
    This manual is not reqd if the said assignments are done properly
    Hope it can assist you.
    Thanks & Regards
    JP
    Edited by: J Prakash on Jun 23, 2010 4:05 PM

  • HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

    In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
    I've tried everything to get a custom umask set for all apps. It just seems impossible...
    Is there a replacement for launchd-user.conf?

    Please file a bug report: https://bugreport.apple.com
    I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

  • How to set ORACLE_HOMES on Windows 2000 for 11i

    How to set ORACLE_HOMES on Windows 2000 for 11i
    As am newbie on windows.
    Its very urgent.

    To set ORACLE_HOME on Windows:
    C:\> set ORACLE_HOME=<location>
    i.e.
    C:\> set ORACLE_HOME=d:\oracle\proddb\10.2.0
    To verify:
    echo %ORACLE_HOME%
    In Apps 11i, you do not have to set it manually, just source the environment file and this will set all environment variables for you.
    - To source the application env file, run envshell.cmd under %APPL_TOP%
    - To source the database env file, run <SID>_<hostname>.cmd under %RDBMS_ORACLE_HOME%

  • How to set up an iTunes account for my new ipad?

    How to set up an iTunes account for my new ipad?

    If you already have an iTunes account, simply use that. You do not need a new account.
    Open the iTunes app on the iPad. Go to the bottom of the screen and tap Sign in.

Maybe you are looking for