How to set up new MBP to use D-Link print server

New to Mac. MBP found 2 of my 3 printers right away. Tried manually configuring the 3rd which is an older HP Laserjet 1320 connected via USB to a D-Link print server. In Win you config using the IP address and port name. Configuration appeared to work but nothing gets sent to printer. If this is an easy fix I would like to go that route but if the print server hardware is too old please suggest good alternative that will work for both Windows and Mac systems as I have both in the house.
Thanks

I was able to resolve this by rebooting the print server.

Similar Messages

How to set a new SCSI number for a second drive?

How to set a new SCSI number for a second drive?
Walter

Walter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

How to set a new session variable?

Hi all,
Can anybody say how to set a new session variable in istore?

Hi,
you can use either
pageContext.getAttribute(VAR, PageContext.REQUEST_SCOPE);
or
<%@page session="true" %>
session.putValue
session.getValue
Hope this will help.
Thanks
Gurjeet

How to create a new excel file using Excel Destination when Destination file not exists.

how to create a new excel file using Excel Destination when Destination file not exists.

Just need to set an expression for excel connectionstring and set delay validation to true and it will create it on the fly.
The expression should return the full path with dynamic filename in each case.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

I signed up yesterday with synch. I dont know my password and I need it to reset a new password. Please advise how to set a new password when I dont know old 1

I signed up yesterday with synch. I don't know my password and I need it to reset a new password. Please advise how to set a new password when I dont know old 1
I set it up on my "upstairs computer" and then came to my "downstairs computer" to synch and I can not get into the account because of the above password problem. I write down my passwords. I must have mistyped it or mis written.
I want to change my password

The new Sync version uses the Firefox account and stores the login data (username/email and password) under the https://accounts.firefox.com site heading in the Password Manager and use the signedInUser.json file in the profile folder to store the credentials once connected to the account to avoid having to enter the master password on each start.

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

HT3728 after soft resetting how to set a new password to my airport express

after soft resetting the airport exppress how to set a new password to my airport express

Hello, MevanK.
Thank you for the question. You may find this article helpful in changing or creating a password for your AirPort Express.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
Jason H.

How to set Border in the Excel using UTL_FILE ?

Hi all,
Any one aware of
How to set Border in the Excel using UTL_FILE ?
Am doing excel creation from a stored procedure.
Thanks
Dora

Hello Dora,
if you need more than simple csv: at Re: How to save a query result and export it to, say excell? you can find links to different solutions. At least the package behind the second link supports defining your own formats (and has a tutorial how to do it).
Regards
Marcus

How to set the full screen mode using setClip method

hi all,
how to set the full screen mode using setClip in that softkeys should not be used insteat on that need to create a own softkeys using commands.
thanks & regards
Bala.

In CS5 there are changes made to how the screen mode is reported. In CS3-CS5 the screen mode has a corresponding number. So for instance if the ScreenMode is set to "Preview Off" and you ask indesign CS3 or CS4 to display the screen mode, it will report "1936552047", while in CS5 it will report "PREVIEW_OFF".
try executing this simple command in respectively CS3, CS4 and CS5 and you will see what I am talking about:
alert(app.activeWindow.screenMode);
there is no difference if you do:
alert(app.activeDocument.layoutWindows[0].screenMode);
The CS5 solution is rather awkward to work with, unless I am missing something? PREVIEW_OFF is not a string, nor is it a number.
Example - doing:
myScreenMode=app.activeDocument.layoutWindows[0].screenMode;
and then trying to reset screenMode by something like:
app.activeDocument.layoutWindows[0].screenMode= myScreenMode
does not work in CS5 of course. It will throw an error. Neither will this line work:
app.activeDocument.layoutWindows[0].screenMode=ScreenModeOptions.myScreenMode;
Any way of working around this?

How to Set "DateOnly" property in DateTimeControl using Javascript.

How to Set "DateOnly" property in DateTimeControl using JavaScript.

Is there any specific reason you want to set it through JavaScript ? You can directly set the DateOnly property in the markup itself.
<SharePoint:DateTimeControl runat=server id="dtControl" DateOnly="true"></SharePoint:DateTimeControl>
Please can you elaborate on what exactly is the requirement for setting this through javascript?
Geetanjali Arora | My blogs |

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

Hi Ramy,
As a work around , you can create a VM without installing OS and configure the Vlan of VNic , then export it .
The new VM will be with Vlan ID when you import the "export file".(note : you need to select "copy the virtual machine " in the tab "choose import type" during importing ) .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to set up new icloud account

how to set up new Icloud account on Mac Mini and connect to all my apple devices

Mike..
Instructions here > Apple - iCloud - Learn how to set up iCloud on all your devices.

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

A number of vendor drivers written for OS X cannot be used when connecting via SMB to a printer that is shared by Windows. This is due to limitations of the driver.
In some cases, if you were to enable the LPD Print Service in Windows, you can connect to the share using the same syntax as SMB but on the Mac you would use the LPD as the protocol.
If you can reply with the brand and model of printer you have then we may be able to provide more information.

How To Set Up Airport Express To Use With iPad2 For My Needs ?

On the advice of several people in a audio forum, I just purchase an Apple Airport Express. I will be using it with my new iPad 2. What I need to accomplish is using my iPad2 to stream subscription based music from the internet to the Airport Express, and for the Airport Express to connect via toslink cable to the DAC in my audio system.
What I am not sure about is how to set up my Airport Express to accomplish this. I do have a wireless network in my home, but wish to keep the wireless connectivity between the Airport Express and the iPad2 separate from it.
I would greatly appreciate any assistance with this. Thanks.

Deggie, firstly, thank you for your attempt to help. I greatly appreciate it. I connected it via the ethernet cable to the router since when I reconfigured the Airport Express adding it to my existing wireless system, the iPad could not connect to anything until I unplugged the Airport Express. I set it up for an ethernet connection to my router based on that experience.
Either the Ipad does not seem able to send anything to the Airport Express, or the AEX is not passing anything on. I also tried streaming a song stored on the iPad 2 to the AEX with no result, so it is not an issue with the subscription channel.
I don't own a miniplug cable of any sort for further testing, but the toslink cable is brand new, and was literally taken out of its package and plugged in, so I feel it extremely unlikely it is the issue. I've also tested it in three inputs on the DAC, so it is definitely not an issue with it.
I have a question though. You said "when you start your subscription and go to Airplay, does the iPad see the AEX?" You may be on to something there. How do I "go to Airplay" I thought it was just automatic? Also, how do I "select it"? This may be the problem.

How to set up new MBP to use D-Link print server

Similar Messages

Maybe you are looking for