How to set up password with netgear DG834G
Hi
I want to set up a password to get onto the internet via my Netgear router.
How?
I don't get all this WEP, WPA or SSID business.
Please can someone give me beginners help?
I'm on Netgear settings page at mo...........
thanks for that.
i've been connected for about 3 years. no problems. so it's not a connect or set up problem.
but feel the need to have a password incase dodgy people want to log on and take over my life
am on netgear now and not sure where to go from here?
anyone?
Similar Messages
-
How to set the password with start-domain instruction in AS 8
Hello,
I am trying to add an instruction in /etc/init.d to start a domain automatically every time the server reboots but I have not found a way to set the master password of this domain. I know there is a --passwordfile option but it only has the choice of setting the adminpassword AS_ADMIN_PASSWORD.
asadmin start-domain --passwordfile /var/SUNWapp/password.txt application
cat /var/SUNWapp/password.txt
AS_ADMIN_PASSWORD=xxx // It does not work to start the domain. I need to set the master password
Is there any way to start the domain automatically??? how can I set the password without prompt?
Thank you,
RegardsYou can also have AS_ADMIN_MASTERPASSWORD in the password file.
"asadmin start-domain" will not prompt for the masterpassword. -
ATG 10.1.2 . How to set BCC password through CIM?
I'm new to 10.1.2 version, trying to installing and configure it properly to learn it. With CIM I configured and set Publishing, Production and Staging instances.
I ran BCC after installation (http://localhost:8180/atg/bcc) and was prompted for password - admin/admin or merchandising/merchandising set by default in previous ATG versions didn't work in 10.1.
I learned from ATGInstallGuide that there is no default passwords preset in 10.1.2 and I have to set them though CIM. (Or ACC)
Here what is says:
*"Through CIM. During the post-installation setup process, CIM prompts you to set the passwords for the*
*default profiles that your environment requires "*
I do remember I was once asked one for password for merchandising user only, and the password I set didn't allow me into BCC, so probably it was for something else.
Please, advise how to set BCC passwords for default account (admin, merchandising and etc) in CIM? I don't see this option in CIM - I everything in CIM and didn't find it
Just in case there is the list of options CIM provides me after running:
[1] Database Configuration - Done
[2] Server Instance Configuration - Done
[3] Application Assembly & Deployment - Done
[P] Product Selection - Done (Oracle ATG Commerce Reference Store &
ATG-Endeca Integration & ATG Site Administration)
[A] Select Application Server - Done (JBoss)
*[C] Custom CIM Plugin Launcher
I'm still not able to open BCC application
Edited by: 994398 on Mar 17, 2013 5:36 PM
Edited by: 994398 on Mar 17, 2013 5:37 PMCIM will ask for new passwords when you select Create Schema and Import data. If you have forgotten the pwd given by you, you can reset it.
Check the below threads regarding similar issue.
ATG 10.1.1 BCC -Default password for admin
not able to login into ATG Dyn admin
Cheers
R -
HT2589 How to set a password before buying an app
How to set a password before buying an app
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try to buy an app and you will be presented with a screen to create an iTunes/Mac App Store account if you have never created one. If you have an iTunes account, sign into the Mac App Store with the same username and password. -
Set local password with secure startup script
Since CPassword has been deprecated by MSFT, I need a secure method to set the password of the local administrator on all workstations. The workaround script that MSFT provided in
the kb article won't work because I have no control over when a computer is on or off. Hence my desire to use a startup script. I logon script would be fine too, but I suspect that wouldn't work since the
end users don't have access to set these passwords.
I can set the password with these commands:
$objUser = [ADSI]"WinNT://./LocalAdmin"
$objUser.SetPassword("NewPassword")
but that exposes the password in the script in plain text, which is worse than the CPassword problem that MSFT "fixed."
So, how can I do this same thing and use a predetermined password without putting it into a logon/startup script in plain text?
Thanks in advance!
Blog /
Facebook / TwitterHa, that's also what I'm doing right now. The simplest way to eliminate most of the threats, in my opinion, is:
1) move the script to a separate file share (since Domain\NetLogon is definitely a main target for hackers), and
2) set the permissions to allow Domain Computers Read Only. This will eliminate most of the threats.
If you're still not comfortable having the password in plain text, use the native PS Encryption (Convertto-SecureString and
Convertfrom-SecureString) and use your own key.
Dave Wyatt has a very informative post on this topic:
http://powershell.org/wp/2014/02/01/revisited-powershell-and-encryption/comment-page-1/
Remember this is not a 100% hacker proof solution, but should be good enough to keep away the novices. -
How to set up SAPconnect with email server
Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
PratikHi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra -
How to set min-password length on ASR1002?
How to set min-password length on ASR1002?
Try:
security passwords min-length
I'm not positive if it's supported in your version of IOS-XE but it is in some. -
I want to know how to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl
You have to connect via ODBC, then use code along the lines of what is described here:
http://scn.sap.com/thread/3526924
by me on March 28 and Jan on March 29.
Also see KBA: 1686419 - SAP Crystal Reports designer does not recognize Access *.accdb file
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
How to set a password on my airpot express?
I am using for more than 5 years and i still don't know how to set tha password on it. any one can help?
Assuming you mean the name and password of the Express itself, connected to the Express, open AirPort Utility on your computer, Select the Express from the list on the left side of the window, choose manual setup, the default password is public you can now rename the Express and change its password, and when finished Update.
Edit: let me correct what I said above, use the assist mode for this work, it is very easy that way. -
How to enable root on mac on 10.9.2 and how to set the password for the same ?
how to enable root on mac on 10.9.2 and how to set the password for the same ?
http://support.apple.com/kb/ht1528
Follow the steps for Lion.
But, why are you doing this? I've never found the need to do that. -
How to set a password's user in active directorywith jndi?
hi,
please, i want to see how to set the password of a user, and i want to ask about ssl if i must use it if want to change the password, please can you give a code example.
thank you.Hi,
Check the second post at
http://forum.java.sun.com/thread.jsp?forum=51&thread=229192&start=15&range=15&hilite=false&q=
-Amol -
How do you change password with out using cd on imac?
How do you change password with out cd on imac?
Please read:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ -
HOW TO SET RESCETRSION PASSWORD FORGET
hOW TO SET RESCETRSION PASSWORD FORGET
Try:
security passwords min-length
I'm not positive if it's supported in your version of IOS-XE but it is in some. -
So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!
Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual) -
How to set this filters with 'or' relationship
Hi Pros,
I have a query as follows, rows and columns are all in structures.
regular_employees
active_employees
lay_off_employees
I want to set up filter as ' employ_status = 0 or employ_subgroup =2' for this query, please tell me how to set this filters with 'or' relationship.Hi Yifei,
Create a formula and enter this (let's name this FORMULA_KF):
((EMPLOY_STATUS = 0) OR (EMPLOY_SUBGROUP = 2)) * enter value IF_TRUE + enter value IF_FALSE
Then create the condition to HIDE the rows having those values to be filtered (if this is your purpose)..
Like,
FORMULA_KF <> 1
Is this what you want mate?
Regards,
Loed
Maybe you are looking for
-
Mail Inbox no longer displays full email under "To".
I have multiple email addresses in use from different email services (cable, web based). Apple Mail draws from all accounts to populate my Inbox, but since switching to Yosemite, I no longer can see which of my email accounts is receiving a new mess
-
Library paths and environment variables
Hello, I am using 10g AS 9.0.4 on a Unix system. I am trying to convert an old JSP web application to work with 10g. It is not an EAR/WAR file so I am manually trying to set it up under the "default-web-app" folder. It uses a number of java class fil
-
Need help in analyzing size of a table
Hi, We have a table DUMMY_TABLE which has a clob column. We need to reduce the size of the table by updating the clob column. The table statistics before updating the clob column is showing 2MB of size as mentioned below. After we run the update scri
-
Bakup Error. errno 13: Permission denied
Hi All, we are having problems with our backups. This happen somedays, in general they work perfectly but sometimes they simply crash. BR0280I BRCONNECT time stamp: 2008-06-20 08.10.54 BR0280I BRBACKUP time stamp: 2008-06-20 08.37.24 BR0134W Unatten
-
Free batch video convert tool?
Hi. I've been going through the forums looking for a video tool to convert clips to a format that is very editable in Premiere CS5. Any advice would be most welcome. I've downloaded about ten tools so far, some better, some crashing, some producing r