How to set up Planning on Multiple Servers

Hi,
1) I am trying to install a Finance Planning application so that it runs on one Planning Web Server and the other operations Planning application on another Planning 9.3.1 web server. Is that possilbe?
2) May be unrelated question:
HP_Windows_Install.pdf has only a few lines explaining how to set up Planning on Multiple Servers. Is it as simple as that?
Here are the "few lines" from install.pdf:
Perform the same installation and configuration process on your secondary servers, making sure to choose
Planning Web Server component for any secondary server.
Make sure you select Reuse existing tables when prompted during the Configure a Database task
in the Configuration utility.

Tomcat.
But it will be nice to know the steps for Weblogic too - as Weblogic will be bundled "free" with future releases of Planning.

Similar Messages

How to set up NAT for two servers using same port with ASDM ASA 5505

Hi there,
We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. Here is the scenario: On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server:
Outside user enters FQDN:5004 and this translates to Database server # 1 as 192.168.1.40:5003
and
Outside user enters FQDN:5003 and this translates to Database server # 1 as 192.168.1.38:5003
If so, what is the easist way to get this done? Or is there a better what to handle this scenario?
Thanks in advance,
James

I would create two objects and use object NAT
object network Obj_5004
host 192.168.1.40
object network Obj_5004
nat (inside,outside) static service tcp 5003 5004
object network Obj_5003
host 192.168.1.38
object network Obj_5003
nat (inside,outside) static service tcp 5003 5003
Of course you will need to open your outside interface for tcp ports 5003 and 5004 to make this happen

How to set focus order of multiple Component in a Frame

I have created a Frame with contain some Label, Textfield, Choice and Buttons
How do set focus order on these Components

write an implementation of
import java.awt.*;
public class PanelFocusTraversalPolicy extends FocusTraversalPolicy
    public Component getComponentAfter(Container container, Component component)
        if(component.equals(cmp1))
            return cmp2;
        if(component.equals(cmp2))
            return cmp3;
        return cmp1;
    public Component getComponentBefore(Container container, Component component)
        //implentation of method
    public Component getDefaultComponent(Container container)
      return cmp1;
    public Component getLastComponent(Container container)
        return cmp3;
    public Component getFirstComponent(Container container)
       return cmp1;
    public PanelFocusTraversalPolicy()
}and set the focus traversal of frame.
setFocusTraversalPolicy(new PanelFocusTraversalPolicy())

How to set a template to multiple pages

Hello,
I'm using Oracle Portal 10.1.2.0.2 and I've created a hiearchy of pages and a template with regions for banner, navigation portlet and content area and I want to set up this template to multiple pages. Manually and uncomfortably, I can edit my page and in [Template] tab in [Properties] select my template. But how can I do it for example for a whole page group? Default template for page group doesn't work for me - though I've set up it in page group, in a particular page I still see [Page template]=none with no effect. Is it possible to do it through some sql query? (With specification of region, in which the page will be mapped?)
Thank you for your advice,
tb

Observation:
Pages from one page group can't see templates from another page group. In case of multiple page groups I have to put my templates in [Shared objects]. Unfortunately I didn't find a way (if even exists) how to copy template from one page group to another, especially to shared objects :(

How to set up and use multiple Ext HD compatible with Windows w/o emulating

I am in deep doodle and confused, sit down and get a cup of coffee cuz is going to be loooooong.
I need some suggestions for my present situation. I have posted a similar question but I only got partial answer and I need to complete this task.
I migrated to my Mac from Windows, and I still have a Windows XP laptop. At first, I formatted my Ext HD as FAT 32 but I noticed that it was too slow. I was suggested to reformat the drives back to Journal. However, recently I had to replace my internal HD and backed up all my data to several Ext. HD. Oh brother what a mistake, while my Mac was at Apple I couldn't get access to my files using my Windows XP laptop because all drives were formatted as Journal (only for Mac).
At the moment, I have the following:
1- Seagate (350 GB orig)- complete back up images 110 GB avail
2- Maxtor ( 500 GB orig) - " " second copy 330 GB avail
3- Old int w/ casing(150 GB orig) 3rd copy 78 GB avail - is working but not sure if it will last, I had this DR for a long time. All 3 DRs formatted as Journal
4- Western Dig 1TB (new FW) 1TB avail
I realized that at the rate that I am shooting I would be running out of space on the current Drives. So I bought 1TB Ext HD FW, but I am in great need from others with more experience than me in setting up a strategy to back up and using my Ext HD. I only use the Int. HD DR 250 GB for Apps only, anything else I use exclusively my Ext HD.
So I would like to know which drive should I use as my primary one, and how I should set up the other subsequent drives as shown above. Do you think that I should reformat all the drives back to FAT 32, (what a task)? I'm also aware the 4 GB limitations. Or should I just format to FAT 32 the 1 TB, and can I partition the this drive and Format each partition with different format,ie. a couple NTFS and one FAT32.
Thanks in advance to all

You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
http://www.ifelix.co.uk/tech/
You may want to use Bonjour for Windows on your PC
http://www.apple.com/macosx/features/bonjour/
Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

How to set delivery plan per day in components requirements

hi
As we know, the production order of finish goods includes started date and finished data such as Sep 1, and Sep 10. So, MRP calculate component requirement which includes delivery date such as Aug 28 (because of lead time).
however, purchase people hope to deliver these components day by day. fox example, total delivery Qty maybe is 1000ea. this production order needs to be produced in 10 days. so, the components should also be delivered 100ea per one day.
however, purchase order just include a delivery date. which have no detailed schedule.
anybody can tell me how to meet this problem?
Henry

Hi,
The order split is not allowed with the following status:
Created, delivered, finally confirmed, locked, technically complete, closed, deletion indicator set.
An order split is allowed with the following system status:
Partially released, released, partially confirmed.
Please check and come back.
Regards,
R.Brahmankar

How to set Page break in multiple tables ?

Hi ,
I have 3 tables in my SSRS report . 3 tables have different groups.
All groups are showing in different excel tabs as expected. Also dynamically generating each tab name based on the group name .
But 3 rd table group tab name not generating dynamically but taking 2nd table last group name .
In below example Johnhancock is my last group of table 2. From first group of 3 rd table onwards it will showing as Johnhancock2, Johnhancock3, Johnhancock4 etc. ( Data is correct only issue with tab name )
Note: I have used add a page break after option for all 3 tables . Please suggest if I need to change any settings.

Hi Kotim,
According to your description, you have three tables in a report with page breaks between those tables. When you export this report as excel, you have set the worksheets names showing each group name. Now you find all tabs of the third table shows the last
group name of the second table. Right?
In Reporting Service, when we export a report to an excel file, if we add page breaks for the report manually, then the report will be exported into multiple worksheets based on page breaks, and the report page names determine the name of worksheets. For
testing this scenario, we add page breaks between groups and tables, and put the group name into page name. It works fine when we export it to excel file. So we suggest you check the page name of the third table, make sure the page name is the group name of
the third table. If possible, please post some other detail information about report design. Here we also have a blog for your reference:
Report Design: Naming Excel Worksheets
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

[CS2/CS3 JS] How to set Default Font for multiple documents

Hello,
How do I set the default font for any new text frames I create.
I have several thousand InDesign templates in which the default font is set to a font that is no longer licenced and therefore requires changing.
I already have a script which will open each template and change the first insertion point of any (empty) text frame to a new font but any new text frames created in these templates still want to use the unlicensed font.
Thanks for any assistance.
Simon Kemp

for existing documents:
app.activeDocument.textDefaults.appliedFont = myDoc.fonts.itemByName ('Arial\tBold');
for newly created ones:
app.textDefaults.appliedFont = myDoc.fonts.itemByName ('Arial\tBold');

How to Set ORACLE_SID in a Multiple Database Server

Hi experts,
This server has 3 10.2.0.4 databases on Windows. Of course 1 of those is the default db.
When I need to oracle_sid to one of the non-default databases I have problems.
Just now I ran: set ORACLE_SID = ultrarpt
But echo %ORACLE_SID% still shows the default database (ultratst).
I'm sure this is easy - how can I point to this database and then confirm that ORACLE_SID is indeed referencing that database?
Thanks, john

user629010 wrote:
Hi experts,
This server has 3 10.2.0.4 databases on Windows. Of course 1 of those is the default db.
When I need to oracle_sid to one of the non-default databases I have problems.
Just now I ran: set ORACLE_SID = ultrarpt
But echo %ORACLE_SID% still shows the default database (ultratst).
I'm sure this is easy - how can I point to this database and then confirm that ORACLE_SID is indeed referencing that database?
Thanks, johnremove the spaces around the '='
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
c:\temp>echo %oracle_sid%
%oracle_sid%
c:\temp>set oracle_sid = mytest
c:\temp>echo %oracle_sid%
%oracle_sid%
c:\temp>set oracle_sid=mytest
c:\temp>echo %oracle_sid%
mytest
c:\temp>

How to set up email for multiple devices

What is the best way to synch e-mail on my wife's iPad with her Mac Book? I thought iCloud allowed her comcast inbox to update on all devices. Thank you.

As I understand from a quick search, the ComCast email is POP3, that is not multidevice email. And just because your wife also has an iCloud account does not mean that the email from ComCast on an iOS device is going to jump over to the iCloud account in the same iOS Mail app.
You should go to the ComCast email website and configure your wife's CC email account to forward her email to her iCloud account. Then configure her Macs and iOS devices with just the iCloud account. She will then have iCloud email synced across all of her devices.
I know this works, I forward two IMAP Gmail and one POP3 Hotmail accounts to my iCloud email account. It works perfectly with email forwarded from any of these accounts, across both of my Macs and both of my iOS devices.
Hopefully her Mac has Mac OS X Lion or she cannot have iCloud. But she can still get the iCloud email in another Mac OS X version and I can help you set that up if necessary.

How to set List title through multiple lines ?

Hi all,
I have a List which has a dynamic title based on the concatenation of the lastname and firstname of persons.
When the concatenation is larger to display in the screen then the List title is cut !
So how to make all the title content visible ?
Thank you very much indeed

Hi all,
I have a List which has a dynamic title based on the concatenation of the lastname and firstname of persons.
When the concatenation is larger to display in the screen then the List title is cut !
So how to make all the title content visible ?
Thank you very much indeed

How to set-up affinity to multiple CPUs

Is there a way to set CPU affinity of a process and all its LWPs.
I am using below configuration:
processor set 1 with n CPUs and allocated to p1,p2, p3 processes.
Inside processor set I want to set-up cpu affinity such that a process uses n/3 number of cpus with best effort.
--Don't want to create more processor set as at any time any of the process may use 100% of pset and other 2 remaining idle, don't want to apply strict boundaries between the processes.
--want to have cpu affinity for a process to more than 2 cores.
idea is to have parallel gc threads more than n/3 and maintain memory locality with best effort.

Is there a way to set CPU affinity of a process and all its LWPs.
I am using below configuration:
processor set 1 with n CPUs and allocated to p1,p2, p3 processes.
Inside processor set I want to set-up cpu affinity such that a process uses n/3 number of cpus with best effort.
--Don't want to create more processor set as at any time any of the process may use 100% of pset and other 2 remaining idle, don't want to apply strict boundaries between the processes.
--want to have cpu affinity for a process to more than 2 cores.
idea is to have parallel gc threads more than n/3 and maintain memory locality with best effort.

How to set warming for closing multiple tabs in FF4 beta 11

If I have multiple tabs opened , it doesnt warm me when I try to close firefox. I even have selected the option to warm me. It only warm me when I have two seperate firefox windows opened .... I found it weird !!

This is what did it for me!
1. Type '''about:config''' into the location bar and press enter
2. Then in the '''filter '''box type '''browser.showQuitWarning'''
3. click that to true and it fixed my problem!
all the other ones that TonyE was talking about were all ready on true, But '''browser.showQuitWarning''' Thank you TonyE for ur help !
i hope this helps some one else! i posted a few pics hope they help!

How to set up imessage on multiple devices?

It used to be simple: imessages showed up on all your devices. It seems that Apple wanted to make it more flexible, you can specify which addresses to use for which device. Now it is not the usual Apple user-friendly.
I have four Apple devices, and my wife has two. What I want is that any message I send from one of my four Apple devices show up on both her Apple devices, and vica versa. Right now, I never know where a message may show up. If I send a message from my iMac, it may go to her iPhone, but not her iPad, and her reply comes back to my iMac, but does not show up on my iPhone. I have added all email addresses to all devices, to no avail. The other day I used half an hour experimenting with her iphone, and finally managed to make messages from my iPad show up on her iPhone, by playing around with different settings. But I did not manage to make messages from my iPad show up on her iPad. This is not the way Apple is supposed to be.
So, my question: is there a simple way to completely synchronize all my four Apple devices so they show the same messages? As mentioned, I have already added all email addresses to all devices, so the settings should be the same (BUT: it used to be possible to add an iPhone phone number as an 'email' address to a non iPhone device. No longer it seems).

I would say to check this support document http://support.apple.com/kb/TS2755 about troubleshooting messages, this one addresses the iCloud account overall http://support.apple.com/kb/HT4436 and this one has to do with activations of iMessage http://support.apple.com/kb/TS4268. You might need to remove the iCloud account from one of the devices you are having difficulty with and re-establish it.

How to set Default database when multiple databases are residing in same server.

I am using solaris and 9i version.
Can you please provide me the steps.
i have selected the O/S category, you did not see that?
Rgds,
G. Rajakumar.

In the home directory of the user you log in as, there should be a file called .profile or .cshrc or possibly .login depending on your O/S. I believe that Solaris has .cshrc, but I don't use Solaris. You should be able to see it using
ls -lat
You need to add a line to this something like
export ORACLE_SID=<<yoursid>> or
ORACLE_SID=<<yoursid>> ; export ORACLE_SID or
setenv ORACLE_SID=<<yoursid>>
There is probably a similar line there already which you can just modify. The change will take effect the next time you log in.
HTH
John

How to set up Planning on Multiple Servers

Similar Messages

Maybe you are looking for