How to set up presentation service group based on groups defined in LDAP

Hello guys
we have successfully implemented LDAP authentication, and we imported 5 groups from LDAP to BI server. However, these 5 groups and their members are not displaying on presentation server under presentation catalog group, it still only has two groups "everyone" and "admin"..
To manuelly create these 5 groups and members will be too much work, so what can I do to get these 5 groups and members on presentation service with the proper data level security defined in admin tool?
Please advice
Thanks

Have you created an Init Block to populate the GROUP variable? See the following post:
http://oraclebizint.wordpress.com/2007/10/12/oracle-bi-ee-101332-and-oid-user-and-group-phase-2/

Similar Messages

How to set up location services on ipod touch

how to set up location services on ipod touch

Go to Settings>Privacy and turn it on.
For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, if the iPod does not know its location it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
You can confirm that by going to place with a know located router like Starbucks or McDonalds

BI Server group and Presentation Services group

Hi Experts,
I've created a BI Server group and a Presentation Services group - both named 'Reporting Superuser'.
Next I've created a user (User_1) in the BI Administration tool and added the user to 'Reporting Superuser'.
The Presentation Services group 'Reporting Superuser' has full control on the right folders and the corresponding dashboards.
I haven't added User_1 to the Presentation Services group 'Reporting Superuser'. According to the documentation that shouldn't be necessary.
Unfortunately when I log in using User_1, I don't see any of the dashboards User_1 should have access to through the group membership.
Is there anything I might have missed?
OBIEE Version 10.1.3.4.1.090414.1900
Thanks for your help
Regards
Andy

First check whether user is assigned with that particular group after logging in..
log in to presentation service with that user and go to my account.. and check for following:
Group Membership
This list shows the groups to which you belong.
Group1
Group2
check whether that user belonged group is there in that list or not...

How to setting Content Presenter?

I dont want the message show up when I move the mouse on the link, how to setting Content Presenter?
[https://communities.oracle.com/portal/server.pt/gateway/PTARGS_0_193021_269_216_224_43/http%3B/collaborationrs%3B7005/collab/docman/download/584917/0/0/0/]

Hi Yannick,
Going through the links which you have provided and will come back to you I face any problem.
Before going through the link I would like to know how to get content from ucms from specifying a query rather than getting from the entire folder.
Yes I am aware similar to the folder option you can specify a query but need help on writing a query and what parameters need to be mentioned in the query.
One more doumb question about where content presenter taskflow is present in the jdev so that I can drag and drop on my portal page.

In flex, How to set a value to one parameter, the parameter defined in a cffunction in a cfc file

In flex, How to set a value to one parameter, the parameter
defined in a cffunction in a cfc file, In the cffunction there are
much cfargument, I want set a value to one of them, such as the
cfc:
<cffunction access="remote" name="myShow" output="false"
returntype="struct">
<cfargument name="ID" type="numeric" default=0>
<cfargument name="GoodsID" type="string" default="">
<cfargument name="DestTime" type="string" default="">
<cfargument name="DestCount" type="numeric" default=1>
How I set a value to only parameter one of them , such as set
GoodsID when use mx:remoteObject.
Thanks for your help

Got maybe a solution for you, I have just tested it.
So, the idea is to use intermediate variables. Imagine Var1 and Var2 variables that you refresh with your more or less complicated queries. Then what you can do is to refresh your final variable Var3 with a query using your intermediate variables. Here is an example for Oracle:
select #Var1+#Var2 from dual
This way you can make a chain of dependent variables: Var3 is using Var2 and Var2 is using Var1.
Hope it helps.
Shamil

How to set the file path dynamically based on sytem, username, and date

Hi All,
My requirement is upload the data into one structure like xyz that is related to t.code MCSZ.
file will be in UNIx SERVER .
PATH IS: /sapif
file name is xy789 load .txt
I have to write code in one user-exit
how can i set the file path for this.
shall i put hard code file path?
because i have to writecode in user-exit.
plz tell me how to set the file path based ons syetem, username, date
Thanks in advance
Ram.A

Concatenate the field SY-SYSID, SY-UNAME and SY-DATUM for the file path

How to set up an exchange group inbox on iphone

I have access to a group (or delegated) inbox through my schools exchange server, but with email on my iphone I can not access it. Any help on how to set that up?

Hello Alicia,
You will have to check with your schools IT pages, or contact them directly.
They will tell you how to set up your Mail account, (if you have to use the Microsoft Exchange or Other in Add Account...)
They can also tell you if you there are any other security steps that might have to be taken as well to allow you access.

How to set only one Index-group for a Search-iView as default?

Hi Everybody,
i have a lot of index ID's for searching in different folders. Is it possible to set only one index-group as default for a search iView? Until now i get all groups as default in every search. It's inconvenient for the users to use the link of 'show options' in order to uncheck the other index ID's.
regards,
Seed
Edited by: seed_mopo on Jun 6, 2008 5:02 PM

hi Seed,
To achieve this you have to follow the below steps
1. Create a new set of search options, choose System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Search -> Search Options Set in the portal.
In that you have a field 'Index Groups', wherein you can specify which index group, the user has to search in. If there are multiple index groups, mention your index groups separated by comma.
See here for more information
http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/content.htm
2. You have to specify the option set that you created in step 1 in the default KM search iview. In the iview properties, under the field search option set, mention the option set that was created for this index group or multiple index groups.
This way, you can configure KM search iview to search in a single index group or multiple index groups.
Revert back in case of any queries
Regards,
Ganesh N

How can I conditionally present different pages based upon a promo code?

I am sending out a general mailing to a list of potential clients. I have broken this group into five unique subsets, and each mailing will include a specific (one of five) promo codes. When a user comes to my website, I want to allow then to enter the promo code, and then I will display one of five specific pages that is tailored to their needs. If anything else is entered into the field, a general error page will be displayed. I am using Dreamweaver CS4 and I have created several websites. I have experience using forms. I am assuming that I will need to utilize dynamic pages to accomplish this; if there is an easier way, please let me know. Given that there isn't an easier way, can someone please tell me how to (or where I can find) create and utilize dynamic pages? Omar

Hi Omar,
On a side note, should I close this question and move it to the Development forum? Being new to utilization of forums, I'm not quite certain of the etiquette.
It´s certainly not a matter of "etiquette" ;-) I think you´re right, because posting your question in the regular Dreamweaver Application Development forum instead will have one huge advantage :: over there you´ll address a huge number of fellow developers and hence get help and different suggestions much quicker, whereas in this forum (which is about a former Dreamweaver application development extension which has been discontinued in April 2009) I have regretfully become the only one who still answers stuff.
Cheers,
Günter

How to set the java service to "Core"

Hi,
I would like to set one of the java service to "core" but the check box is not editable. Can any one let me know if there is a way to make it core?
Thank you.

Hi Hareesh,
Hope you are doing good.
Thats great.
The application startup mode is set to decrease the initial load on the J2EE Engine and to minimize its startup time at each restart. The default value is "lazy" and you should use the most appropriate startup modes for your applications. This is because all WD applications are designed started lazily and they should be all stopped and get only started when they are triggered for the first time (i.e. by first invoke of the given WD application). The decision was taken that way because SAP wanted to prevent start-up time problems when Web Dynpro applications were started right with the server. This is why they always start upon first request.
So you can change the "StartUp" for the application you deem fit. 1 equals to manual, 2 equals to lazy and 3 equals to always (using configtool as mentioned earlier).
Specifying the Application Startup Mode
http://help.sap.com/saphelp_nw73/helpdata/en/25/0c08f3981343609d4045f8acaa0a76/frameset.htm
Thank you!
Kind Regards,
Hemanth

HCM F&P - How to set the field as Required based on drop down values

Hi Experts,
I have a requirement to set the Date field as mandatory when a particular value is selected in drop down list. I have already tried with MessageBox though it displays the error message but process moves further i.e. on clicking Check & Send button it throws an error message but still it moves further and i can see only Send button. Ideally it should halt there itself.
Thanks & Regards,
Jitesh Talreja

Thanks for your valuable inputs
Chintan
I have already tried this. It only highlight the field with the red border but still allow to move further.
Mukesh
Yes, we can definately control this from the backend but that would be the last option i should execute. Ideally, this is something to be controlled in front end itself
Poornima
By setting the field attrbiute Required will set the field mandatory as a whole irrespective of drop down values or any other UI element.
Regards,
Jitesh Talreja

How to set keynote presentation as a slideshow

I want to set a few keynote presenations on an iPad to slideshow mode for a tradeshow. Is this possible?

You would be better to ask in the community dedicated to iWork for iOS.

How to set column value to blank based on another column's condition in validation settings in sharepoint 2010?

I need to set a field to be blank when another field is blank:
when [Return Date] is blank [when item has not been returned]
[Received by] should be set to blank
I tried this:
=IF(ISBLANK([Return Date]),ISBLANK([Received by]),TRUE)
But it failed.
Is this possible through list validation settings?

Hi
you cannot reference another column in a formula that creates a default value for a column.
PF below link for the same.
http://ricardoramirezblog.wordpress.com/2013/05/02/calculated-field-formulas-for-default-value/
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

How to remove prefix from AD group names in ldap auth. provider?

Hi all,
I'm using weblogic 10.3.5 and LDAP authentication provider for accessing microsoft AD.
Group names in AD are created and look like this: PREFIX_basic_user, PREFIX_advanced_user...
but enterprise roles in ADF application are created like this: basic_user, advanced_user...
Is there a way to map AD groups to enterprise roles trough LDAP Authentication provider without adding PREFIX_ on enterprise roles in ADF application?
Thanks in advance

Powershell (or vbscript if you want to be old school).
You can trigger a powershell script which will remove the offending user(s) easily enough with out resorting to a TOLDAP pass. Nearly any script type thing would work but powershell is preferred. It can be triggered separately from the TO AD stuff and will take multiple objects to run in one pass if you can construct the command line (or create a text file and feed it in).
Otherwise, TOLDAP is the way to write to AD...
Peter

How to connect Essbase/Shared Services 11.1.1.1.3 to LDAP

Hi,
I just installed Essbase 11.1.1.1.3 with Shared Services. I have never connected it to a corporate LDAP environment before. I remember in the past version 6/7 etc.. there was a CSS file that needed edited. Is that still the case or do I have to go into Shared Services and configure etc...
Thanks

Hi,
You configure it all through shared services, have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/ch05s05.html
Cheers
John
http://john-goodwin.blogspot.com/

How to set up presentation service group based on groups defined in LDAP

Similar Messages

Maybe you are looking for