How to set up printer on iPad

I need help to set up printer for iPad

1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
3. Start printing from your iPad without wire
http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

Similar Messages

How to set up printer from ipad?

how to set up printer from ipad?
Johs.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

How to Set up Print As Image Registry Default.

This is a response to the archived post at:
martin hrubes, "How to customize printing by registry - print as image" #, 6 Nov 2007 2:28 am
I was trying to find out how to set the "Print As Image" advanced setting to be enabled by default. Here is what I discovered through trial and error.
1. The setting is stored per user and per printer. (i.e. it has to be set for each printer for each user.)
2. The registry setting is stored in the following key:
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\8.0\General\cPrintAsImage]
3. In this key, each printer has a separate binary value named s0, s1, s2, etc. The number increments by 1 for each printer added. If you open the value data, you will see it contains the name of the printer encoded in hex. (ex. hex coded for \\Server\Printer1)
My recomendation is to open a pdf file in reader, go to File -> Print ->Select Desired Printer -> Click "Advanced" Options -> Enable "Print As Image" -> Click OK - Click OK again. Repeat for each printer you want to
change.
**NOTE** If you don't click OK both times (i.e. cancel the print dialog), the change will not be saved. You have to actually print something to the printer. If you don't want to print something, make sure the printer is offline or not accessible (unplug the network, usb, parallel, serial cable) first. Once the printer has been changed, it will keep the setting until to you change it.
After you have set-up all of the desired printers, open RegEdit and navigate to the above key. Right click on it, and export it. Note the file name and location you are saving to. Close RegEdit. "Edit" (Right Click) the file just exported ("Opening" the file will just import it back into the registry.). Once opened, highlight and copy the registry key and all of the registry values. Paste the key and values at the end of the file. In one of the keys change "HKEY_CURRENT_USER\" to "HKEY_USERS\.DEFAULT\". Save and exit the file.
When imported this file will enable the "Print As Image" setting for the currently logged in user plus add the setting to the default users profile so any new users to the machine will have it enabled by default also. However, it will not add it to any other user profiles that already exist on the computer. To do this, either use a login script for domain computers or add the reg file to the "All Users Startup" folder.
It would be nice to have a setting in the deployment custimazation wizard to handle this, but for now we're stuck with enabling it the hard way.

Yes Spyla, please see this link http://www.404techsupport.com/2008/09/09/make-adobe-reader-and-adobe-acrobat-use-print-as- image-setting-by-default-2/comment-page-1/#comment-3112.
Allan, many thanks for your post, it certainly helped point me in the right direction. what I found though is that you do not need to tick the print as image box at any point during the setting up of this. All you need to do is add the registry key for whichever version of Adobe you are using for this to work. So basically. what you are saying for each instance of Adobe is regardless of whether or not the print as image is selected, the registry key is saying always print as image for the printer as specified by the hex code. I have found that for network printers, you have to include the full path i.e. \\<servername>\<printername> e.g \\testserver\printer1 and convert all of that to hex. With later versions (9 up over), they have allowed for the string name of the printer so that it is just plain text which also makes life easier.
What I do is apply this registry entry via Group Policy on a per room basis so that we only ever need to add one printer to the list. you could do this globally by adding all printers sequentially using s0, s1, s2 or t0, t1, t2 etc depending on which version you are using. The screenshot shows the registry key for 1 printer for Adobe Reader 8.
The value data is the binary code for the actual full printer name
This works a treat.
Hope this helps
Thanks

How to set default print orientation in oracle reports 6i?

Can anyone please help how to set default print orientation of Oracle Reports 6i? Currently document is printed in Portrait orientation, but I need to print it in Landscape orientation. Is this possible?

It is solved now. Go to Layout Model -> Main Section, Press F4. In the property pallet select the Orientation that is required to be selected when print is taken for that report.

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

How to set up printer

How to set up a network printer on a Ipad ?

1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
3. Start printing from your iPad without wires

How to set default printing in black only

Greetings,
I'd like to set my default printing with Firefox at black ink only, which I can do individually prior to printing a page, but it reverts to color after that printing. But if I set the size at, say, 80%, that becomes the default setting, or if I set portrait/landscape for a single printing, that becomes the default setting. Why can't the desired black-ink only setting default like the size/portrait/landscape setting? What I want to do is set the printing permanently at black only, and the size at 100%, but allow one-time printing at landscape or portrait, or sizes less than 100% without those settings becoming the default. How can I do this? Thanks for any help
Best wishes, Tom
I've tried the help solutions on the website to no avail....

Greeting ideato,
Thanks so much for your reply. I've clicked on the Firefox button at upper left, then Print, then Properties, then Advanced, under which is listed Printer Features (I have only 1 printer), below which is a line with Print in Grayscale, clicking on which has has 3 options: Off (apparently default), High quality Grayscale, and Black Ink Only. I click on the latter, and click on OK for this window and others in the sequence, and it'll print in black only for the present printing, but will revert to color for the next printing, 'though like I said, if I change the size to 80% or from portrait to landscape, those settings will remain. I can't figure it out. Again, thanks for any help.
Regards, Tom

HT4623 How to connect my printer to iPad?

Khi can you connect your iPad to a printer, please

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How to connect c4480 printer to ipad

How to connect my hp c4480 printer to IPAD.

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to set the printer setting in VBscript

i have a folder which is containing 20 pdf files ,i want to print only 2nd page with 2 copies in all 20 PDF files.
i have VBscript
TargetFolder = "file path"
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(TargetFolder)
Set colItems = objFolder.Items
For Each objItem in colItems
objItem.InvokeVerbEx("Print")
Next
here all files are printing all page but how to set 2nd page with 2 copies in 20 pdf files

You don't mention what SDK you're using.
If you're running a Nokia SDK, for instance, you need to explicitly set the proxy URI somewhere else. Try running your MIDlet with Default Color Phone and see if it works.
Unfortunately, proxies do not use exactly the same HTTP request method as normal Web clients (i.e., browsers). Most caches are smart enough to try to be transparent, however. It might be worthwhile to ensure that your proxy is set up as a transparent one.
Worst case scenario, you can always host the files on a server inside your LAN, so it doesn't have to breach the proxy (or, indeed, on a little Web server running on the same machine as the emulator).
Jouster

Report 3.0 : How to set the printer margin??

Hi all,
In report previewer, I am able to set the printer page margin
mannally.
Then, If, I've get some reports by RUN_PRODUCT in batch mode,
how can I set the page margin??
Regards,
Andrew
null

Hi amole,
one more doubt,
Iam new to use BAPI_ENTRYSHEET_CREATE.
What are the mandatory fields that should be passed to it to create SES ( Service Entry Sheet ).
The data given to me is:
Purchase Ord number,
Activity Number,
Rate,
Quantity,
External Number.
Is the above data is enough to create SES.
please clarify.

How to Set Default Printer Just for Safari

I use 2 printers.
One prints paper docs etc. The other prints labels only. When i want to print the labels I have to select that printer in the print dialogue in Safari every time. Super annoying.
IS there a way to set a gedault printer just for Safari?
I tried using the localhost:641/admin method and all i get is Bad Request (the localhost address i mention here is not the actual version as i cannot remember it now, but it was something like that)
Using safari 6.0.2 and osx 10.8.2

Please see these docs.
How To Setup Default Printer for a User. [ID 153927.1]
How to Set Up a Default Printer for a User Within Oracle Applications [ID 1018856.102]
How To Define a Default Printer? [ID 1237254.1]
How To Setup Default Printer For Applications [ID 184109.1]
Thanks,
Hussein

Cannot figure out how to set up printer with iphone4

Hi -
I am trying to figure out how to set up my HP printer to print from my iphone 4, and clearly need help !! I downloaded the hp app on my phone, but it cannot locate my printer... Aaargh ! please advise

Hi,
Well, you rpinter is not an Airprint printer nor an ePrint printer, please try Cloud Print:
http://www.google.com/landing/cloudprint/
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TS3308 How can use the printer with iPad

How can you use the printer ( that is connected wirelessly to the same network ) with iPad

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

HT5557 How to set Night mode on Ipad Mini iBooks apps when reading PDF file?

How to set Night mode in iBooks (ver 3.1) for iPad Mini?

It's not available within the iBooks app for PDFs, the closest you can get is to the Invert Colours accessibility option (though pictures will appear negative) - you can set Settings > General > Accessbility > Triple-Click Home to 'Invert Colours', which means that you can then use a triple-click of the home button to go to white text on a black background.

How to set up printer on iPad

Similar Messages

Maybe you are looking for