How to set up RAID 5 in Windows 8

What are the procedures and settings to set up RAID 5 in Windows 8?

What are the procedures and settings to set up RAID 5 in Windows 8?
I would not do it... Throw in one more spindle and build RAID10 (or Storage Spaces equivalent of it). There are very few workloads working well with parity RAIDs and also single parity RAID has own issues with modern high-capacity spindles (slow rebuild
times, silent bit rot, high chances of a double failure etc). See:
Why RAID5 is bad?
http://community.spiceworks.com/topic/356486-why-is-raid5-so-bad
Good luck!
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Similar Messages

How to set the path variable on Windows ME?

I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.

Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.

How to set different icons for different windows which is seen in the top left corner?

Hi
How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
Is there any way to set icon by calling any dlls.
Thanks & Regards
Samuel J
[email protected]

Hi Sam,
no problem. See the attachment.
Mike
Attachments:
TestIcon_LV85.zip ‏44 KB

How to set the fix size jframe window

when I run the jframe ,the jframe window size is very small
1)how to set the fix size jframe window??
2)how to set the jframe cannot change the window size??
thx~~

1. You can set the size by calling JFrame's method setSize. There are two versions of this method: (1) setSize(int width, int height) and (2) setSize(Dimension d). Note, that when you use this method to set the frame size, you don't have to call JFrame's pack method.
2. JFrame has a method called setResizable(boolean resizable) which you can call with the argument false.
Without any ill intent, these questions are regarding something that is very easily answered by looking at the documentation for the JFrame class. I suggest to anyone working with swing to at least look briefly through the base classes they're extending before giving up. In my experience it is always more gratifying to figure things out on my own than asking someone. But please don't take this the wrong way, I respect people who seek out help in order to further their knowledge, instead of just giving up.

How to set iphone 5 bluetooth on windows 7 64 bit in notebook Toshiba

you can tell me how to set iphone 5 bluetooth on windows 7 64 bit in notebook toshiba qosmio f750

Unless you're trying to tether your Internet connection from the phone to the computer, you don't. That is not a feature of the iPhone.

How to set up Link Aggregation on Windows 7 ?

I am going to buy a new Switcher that is LACP (Link Aggregation Control Protocol) supported so I can get a little bit better internet by combining my two ethernet ports on my MacPro (Mid 2012) where i have Windows 7 Ultimate installed as well as Mac OSx. On Mac OSx it is easy to set up Link Aggregation takes only 30 sec by going to Manage Virtual Interfaces and click round (for doing this you need a Link Aggregation supported router or switcher), but on Windows it seems to be a little bit harder after looking around for a while now. Is there anyone here who knows how to do it or know if its possible to set up Link Aggregation on Windows 7 ?
I'll be thankful for any help i can get

hehe I thought over that too
But since I dont got a windows forum account I thought of asking here fisrst

How to set tomcat server path in windows XP

hi frnds,
I am new to java technologies.I am trying to learn all alone Hw am wandering how to set class path of tomcat server in windows xp.
it shud be in user varibles r system varibles
Thanks everyone in advance,
cheers........
roopa

What exactly are you trying to accomplish here?

How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

Hello,
I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.
I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
How can implement this for this sending outgoing faxes as well?
I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server.
Any help is appreciated. Thanks!

Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
The article is so easy to understand with detail procedure and guideliness
Exchange Queries

How to set default size for .chm window?

I know there is an answer at grainge.org, but it seems to be
referring only to a .chm using skins, which I am not.
Anybody know how to make the default size of the .chm larger?
thanks, Leisa

Lacona,
The default window size is set in your windows properties
dialog in RoboHelp. It can also be set manually in the .hhp file
before you compile. If you open the .hhp file in a text editor,
such as Notepad, you will see a [WINDOWS] section and for each
window defined there will be a series of numbers. One of these is a
vector [in square brackets] that defines the original position.
These are absolute screen pixels.
In older versions of RoboHelp, one of which I use, there was
a limit to the size of the window RH would allow but when I changed
the .hhp, RoboHelp didn't try to overwrite it unless I reopened the
Windows properties dialog. I'm not sure how the latest versions
handle this but you might try editing the .hhp with Notepad and
then compiling the .chm.
John

How to set up raid??

hi
can anybody help me with setting up a raid ?
i dont know alot about hardware so ill be so glad if anyone can help
thanks alot

I never used your specific board so you will need to go and find the specific settings yourself, but there is the prinicple behind it.
You have a RAID controller which displayes virtual HDDs to the operating system.
The operating system does not know how many physical disks make up each virtaul one (reffered to as an array).
The steps are:
-Install the disks
-Go to the RAID bios (if you have more than one RAID controller they all need to be connected to the same one and you need to use the right bios)
-Setup one or more arrays using these disks
-Start the operating system instalation and supply the RAID drivers when promptede (right at the begining when you are asked to press F6 to sipply RAID or SCSI drivers). These drivers must be on a floppy!
-Create a partition on the desired array and format it.
-Install the OS.

How to set up user account in Windows 7/Premiere Elements 8.0/8.0.1?

At the present time I have only the Windows XP Professional SP3 32 bit operating system which works from a User Account with Adminstrative Privileges when it comes to using Premiere Elements.
I have read that in Windows 7, the default user account is one with standard rights. My first question is, when using Premiere Elements 8.0/8.0.1 in general in a Windows 7 32 or 64 bit environment, do you have to elevate the user account to one with adminstrative rights and, if so, how?
My second question is, is there anything in the Windows 7 user account setup that would specifically target the Premiere Elements Project Archiver/Archiver "Trimmed" as well as Copy options to abort with the message "no user privileges to perform this operation"? The rest of the program performs OK. Supposedly inadequate hard drive space is not a factor.
Thanks for any insights into these two questions.
ATR

SG
Just an update to the question that I presented when I started this thread.
You really never did say what type of a User Account you are using in your Premiere Elements 8.0/8.0.1 on Windows 7? But based on the information provided by several users, User Account with Administrative Rights seems to be the way to go since all of them were using it and had systems that were running well. I would have expected that based on the Premiere Elements Windows XP requirements. I have yet to have someone come forward to say that they are using Premiere Elements 8.0/8.0.1 on Windows 7 with a User Account with Standard Rights and the program is running well. Will you be that one?
Besides me switching from Windows XP to Windows 7 in the near future, what motivated this line of questioning was the report that I had seen of a user with Premiere Elements 8.0/8.0.1on Windows 7 who was reporting "permission" error messages when trying to archive a project with the Project Archiver (Archiver "Trimmed" and Copy options). Further questioning brought out that the problem extended to the AutoSave feature as well. The user claimed to be saving to an external hard drive (formatted NTFS) with about 800 MB free space. And still further questioning brought out that the error message included a free space and/or permissions error. Yes, there were extremely large file sizes involved here (way over 4 GB)
The story had a happy ending where the remedies were:
1. User Account with Administrative Rights
and the major
2. Formatting the thought to be NTFS external hard drive from FAT32 to NTFS.
ATR

How to set focus in the parent window after a JOptionPane pop up ?

I am not able to set the focus back to a JTextField in the parent window after poping up a JOptionpane.showMessageDialog(). I tried requestfocus(),requestFocusInWindow etc......but not working. The code is given below.
if ((encryptor.encrypt(password)).equals(configuredPasswd)) {
                    validPassword = true;
               } else {
                    JOptionPane.showMessageDialog(saveUI,"The password entered is not correct.");
                    saveUI.getPasswdField().setText("");
saveUI.getPasswdField().requestFocus();
Sometimes the focus is coming to the JTextField.Sometimes it appears for a moment and then dissappears.Please give a solution

see if this makes a difference
if((encryptor.encrypt(password)).equals(configuredPasswd))
validPassword = true;
else
JOptionPane.showMessageDialog(saveUI,"The password entered is not correct.");
ActionListener al = new ActionListener(){
    public void actionPerformed(ActionEvent ae){
      saveUI.getPasswdField().setText("");
      saveUI.getPasswdField().requestFocusInWindow();}};
javax.swing.Timer timer = new javax.swing.Timer(100,al);
timer.setRepeats(false);
timer.start();
}

How to set focus on only one window?

Say, I have a main window with a button inside, and if the user presses on that button, another warning window with an OK button inside will then pop up. Now the question is how can I disallow the user from returning back to the main window unless the OK button on the pop-up window is pressed ?

What is a modal dialog? Appreciate if a simple example could be given to illustrate how it works. Thanx!

How to set Essbase Administration Server as Windows service?

Hi,I have installed the Essbase Admin Services 7.1.0.0 Build 261 under Tomcat application server. Now from Start menu I have to select "Start Administration Server". Is there any way to set this option as Windows Service.My system:Windows 2003 SP1,Essbase 7.1.0,Essbase Admin Services 7.1.0.0 Build 261Thanks,Grofaty

This information is in the Install Guide that comes with EAS.Running EAS as a Windows service is an option you can select when you install it. If you did not do that, you can set it up to run as service by doing the following: (From the EAS Install Guide)----------------------------------------Adding Administration Server as a Windows ServiceYou can add Administration Server as a Windows service, even if it was not installed as a Windows service.?To add Administration Server to the list of Windows services:1. From a command prompt, navigate to the following directory: EASPATH\eas\server\bin2. Run the following command: install_service.batAdministration Services installs the Windows service as Hyperion-Essbase_Administration_Server Windows service. A message displayed in the command prompt window indicates that the service is installed.3. Start the Hyperion-Essbase_Administration_Server Windows service. See ?Starting the Administration Server Windows Service? on page 49.The Hyperion-Essbase_Administration_Server Windows service is set to start automatically each time you reboot.

How to set the sga size in Windows NT Oracle Database

Hi,
Can any one tell me how to estimate the appropriate sizes for SGA and sorts..etc, Any estimate based on the total database size..?
Regards,
G. Rajakumar.

Hi All,
Got the answer. How I wish this can be define declaratively.
Code below for the soln.
OATableBean table01 = (OATableBean)webBean.findChildRecursive("table01RN");
table01.queryData(pageContext, true);
table01.prepareForRendering(pageContext);
DataObjectList aColFormat01 = table01.getColumnFormats() ;
oracle.cabo.ui.data.DictionaryData ColFormat01 =(oracle.cabo.ui.data.DictionaryData)aColFormat01.getItem(pageContext.findChildIndex(table01, "ColLabel"));
//Column Width
ColFormat01.put(WIDTH_KEY, "30%");
//Column Format - Right-aligned varchar
ColFormat01.put(COLUMN_DATA_FORMAT_KEY,NUMBER_FORMAT);cheers,
Elmer
Edited by: Elmer on Mar 8, 2010 2:46 AM

How to set up RAID 5 in Windows 8

Similar Messages

Maybe you are looking for