How to set up reminders and appointments on my iphone 5

I can't semm to either tell Siri to set up reminders & appointments or to it it manually. Any help would be appreciated.
Ali

What happens when you try? Any error messages?

Similar Messages

How to set up icloud and sync contacts on iphone?

I'm trying to help out my builder, who is a friend and occasional client of my business.
He has no decent way of keeping all his contacts organized, many are on his iphone, and others on a lot of yellow sticky notes. He wants to set up his contact list so he has clients, vendors, sub contrators, etc.
I have my contact list on my iMac set up with business, friends so forth.
The builder has an iPhone 4s I think (maybe 5, I'll check if it makes a difference). He told me he backs up his phone now and then with iTunes on his PC. He rarely uses his PC and really just wants them on his iPhone and iCloud (so I can access them and keep his contacts up to date).
He has about 400 contacts in his iPhone. I want to add all those yellow sticky notes to his contact list on his icloud (which he just signed up for and has never used).
what is the best way for me to get his contacts from his iphone into icloud and than set the whole thing up so when I add new contact to his address book in icloud they turn up on his phone?
I've been googling this and reading online answers for an hour but I'm now more confused then I was.
Thanks for any help.
Susan

It depends on where is contacts are on his phone. If they are stored locally in the "On My iPHone" account, all he would need to do is go to Settings>iCloud, sign in with his Apple ID to create his account (or sign in with an existing iCloud ID if he already has one) and turn Contact On. They will then upload to his iCloud account.
If they are being synced with an external service such as Gmail, Yahoo, an exchange account, etc., they will have to be copied to his iCloud account in order to sync them with iCloud.
Unless you already know, have him open the contacts app on his phone and tap Groups (if he has any contact groups). Does he have any non-iCloud accounts listed, such as On My iPhone, Gmail, Yahoo or an exchange account? Also have himego to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Does he have the Default Account setting in the Contacts section, and if so, what is selected as his default account?

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows.
I have 5 oracle instances. Every time if i want to start up the services , I am manually setting the environment variable (ORACLE_HOME and ORACLE_SID) and starting the services one at a time.
Can we set multiple ORACLE_HOME and ORACLE_SID in Start->My computer-> properties-> advance-> Environment variable.
Thanks
Naveen

Hi ,
Can you please give me the link, for the doc you are referring to
Thanks
Naveen

How to set the IP and MAC address in C program?

My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
Any idea is welcome! Thanks!

Hi
As a simplest possible solution, you can use the system command
to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
Or you can use the DLPI calls ( do a man DLPI or search for a
Sun documentation on the same at http://soldc.sun.com) to write
a pure C program.
HTH
Shridhar

How to set default currency and Country in R12 financial modules

Hi all,
How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
Can anybody advise ?
Thanks & Regards,

Hi,
Change the below profile for the user to a territory different than the US :
In System Administrator, navigate to Profiles -> System.
Select Site, Application, and Responsibility.
Profile options:
Default Country
HZ: Reference Territory
ICX: Territory
Regards,
Raju.

How to set the WIDTH and ALIGN of h:column in h:dataTable ??

How to set the WIDTH and ALIGN of <h:column> in <h:dataTable>??
Thanks a lot!

Hi,thanks to your reply.
Now I find a more convenient appraoch to set column's width and align respectively:
<h:dataTable ...>
<h:column>
<f:facet name='header'>
</f:facet>
<h:outputText style="width:80px; text-align: right;" value='#{row.fieldA}'/>
</h:column>
<h:column>
<f:facet name='header'>
</f:facet>
<h:outputText style="width:120px; text-align: left;" value='#{row.fieldB}'/>
</h:column>
</h:dataTable>
It works fine.
^-^

How to set the router and play the Command & Conquer using direct IP mode?

My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?

Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details.

How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain. Also the same problem with input coupling
Does anyone know how to set the gain and input coupling for each individual channel?
Thanks,
Hector
LabView 8.5 Windows XP

Hey Hector,
http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
This has a few examples of how to do that. Let me know if you have further questions.
Have fun!
-gaving

How to set the Mail and Fax options for the Smartforms ???

How to set the Mail and Fax options for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

>
veera Karthik wrote:
> How to set the Mail and Fax options for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
Hi
Check this Link:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
Vishwa.

How to set input delay and output delay when source Synchronous

ClkIN is the board clock which is connected to the FPGA. Clkif is the generated clock from ClkIN. The Device's clk come from Clkif. So, how to set input delay and output delay in this scene(within my understand, this is Source Synchronous)?
The example in many document, the input delay and output delay setting all refer to board clock(within my understand, this is System Synchronous). In that scene, the input delay max = TDelay_max + Tco_max; input delay min = Tdelay_min + Tco_min; the output delay max = Tdelay_max + Tsu; output delay min = Tdelay_min - Th.
So, I want to know how to set input/output delay in the Source Synchronous.
In system synchronous, I set input/output delay such as:
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
create_generated_clock -name Clkif -source [get_pins cfg_if/clk_tmp_reg/C] -divide_by 2 [get_pins cfg_if/clk_tmp_reg/Q]
create_clock -period 40.000 -name VIRTUAL_clkif //make virtual clock
set_input_delay -clock [get_clocks VIRTUAL_clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks VIRTUAL_clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -max 1.800 [get_ports DOUT]
*******************************************************************************************

So, first. Architecturally, the clock that you forward to your external device should not come directly from the clock tree, but should be output via an ODDR with its D1 input tied to logic 1 and the D2 tied to logic 0. This guarantees minimal skew between the output data and the forwarded clock.
ODDR #(
.DDR_CLK_EDGE("OPPOSITE_EDGE"), // "OPPOSITE_EDGE" or "SAME_EDGE"
.INIT(1'b0), // Initial value of Q: 1'b0 or 1'b1
.SRTYPE("SYNC") // Set/Reset type: "SYNC" or "ASYNC"
) ODDR_inst (
.Q (Clkif_ff), // 1-bit DDR output
.C (ClkIN_BUFG), // 1-bit clock input
.CE (1'b1), // 1-bit clock enable input
.D1 (1'b1), // 1-bit data input (positive edge)
.D2 (1'b0), // 1-bit data input (negative edge)
.R (rst), // 1-bit reset
.S (1'b0) // 1-bit set
OBUF OBUF_inst (.I (Clkif_ff), .O (Clkif_out));
This generates an output clock that is the same frequency as your input clock. This is consistent with your drawing, but inconsistent with your constraints - is the forwarded clock a 50MHz clock or a 25MHz clock?
I will assume your ClkIN goes to a BUFG and generates ClkIN_BUFG. Your first constraint generates a 50MHz clock on the ClkIN port which will propagate through the BUFG to (among other places) this ODDR.
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
Assuming your forwarded clock is supposed to be 50MHz, then your 2nd command is close to correct
create_generated_clock -name Clkif -source [get_pins cfg_if/ODDR_inst/C] -combinational [get_pins cfg_if/ODDR_inst/Q]
With this done, you have successfully described the forwarded clock from your design. This is the clock that goes to your device, and hence should be the clock which is used to specify your input and output constraints.
set_input_delay -clock [get_clocks Clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks Clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks Clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks Clkif] -max 1.800 [get_ports DOUT]
If you want to get fancier, you could try adding a set_clock_latency to the forwarded clock to account for the board propagation of the clock
set_clock_latency -source TDtrace2 [get_clocks Clkif]
(But I haven't experimented with clock latency on a generated clock and I don't know for a fact that it works).
Avrum

Hi! I'd like to ask how to erase all content and settings if your iphone was stolen? Please help.

Hi! I'd like to ask how to erase all content and settings if your iphone was stolen? Please help.

Were you signed in to iCloud?
Did you have Find My iPhone enabled in the iCloud settings?
If so sign in to iCloud.com > Find My iPhone > Devices & select your iPhone
Otherwise, you are out of luck.

How do I transfer photos and videos from my iPhone 5 or Mac to an inactive iPhone 4S that my granddaughter uses ( it doesn't have Internet connection )

How do I transfer photos and videos from my iPhone 5 or Mac to an inactive iPhone 4S that my granddaughter uses ( it doesn't have Internet connection )

Two steps:
you can first transfer photos from iPhone to computer and then drag them to the external hard drive. For your iTunes library, you can follow:
1. Quit iTunes.
2. Locate your external drive.
Mac: On the desktop or Finder sidebar.
3. Locate your iTunes folder:By default, the iTunes folder is located in:
Mac: Finder > username > Music
4. Drag the iTunes folder to your external drive. This can take a while if you have a lot of items.
6. When the transfer is complete, your iTunes Library will have been successfully copied to your external drive.

How to sync the apps and music from my iphone to my itouch

How to sync the apps and music from my iphone to my itouch

You have to transfer/get the apps and music from the iPhone into iTunes on your computer and sync them to the iPod. You transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer

Set up reminders (and notes) on the mac?

Hm, this should be trivial, but I can't find it: How do I set up, manage (and then sync) reminders on the mac? (Notes equally.) Or do I have to use other products for that purpose?

I have the same question, ***** no one answered yet but I would think that you should be able to type a reminder on your mac and it syncs to the reminder on your phone. Sorry if my response does not make sense lol falling a sleep

How to set buildID.xml and custom.properties in SDK

Hello,
I just completed a new build deployment of SAP ME5.2, because after I deployed the new version, I don't think I have set a
correct version number.Can you someone give me a sample how to set the buildID.xml and custom.properties? I am a new on the SAP ME5.2
The Base version is ME_Base_5.2.5.16.5_netweaver-71_Update.zip and
MEClient_Base_5.2.5.16.5_netweaver-71_Update.zip. the HB customzation
version is ME_xxxxxx_2.0.0.0.x_netweaver-71.
Within the sap note 1484551, you mentioned we need change the
SDKInstallDir/build/buildID.xml file, here is the context of the file:
buildID.xml -
<?xml version="1.0" encoding="UTF-8"?>
<buildID xmlns:xs="http://www.w3.org/2001/XMLSchema">
<customer>XXXXXX</customer>
<revision>1.0.0.0</revision>
<build>1</build>
</buildID>
buildID.xml -
1. how can we change the revision and build?
There is another file BuildToolDir/build/script/custom.properties, here
is the file context:
custom.properties----
This file contains build properties used to configure the build
system.
The name of the software vendor implementing the customizations.
vendor.name=xxxxxxxxx
Vendor build identifier. This value is used to uniquely identify
customizations built by a particular vendor for a particular customer
and base
application version.
This is also used in path locations and in naming certain build
artifacts, like the custom EJB module and the utility classes archive.
vendor.id=xxxxxxxxx
The installation of the J2EE engine installed in the development
environment.
ex. C:/usr/sap/CE1\J00
j2ee.instance.dir=J2EEInstanceDir
The web context path used to access the main web application. This
is used by the build to set the
context-root value in application.xml after an update has been
imported.
web.context.path=
The web context path used to access the production XML interface web
application. This is used by the build to set the
context-root value in application.xml after an update has been
imported.
xml.context.path=
The web context path to access resources from the web extension
application, like images and work instruction HTML files.
web-ext.context.path=web-ext
The target database vendor. Valid values are 'oracle' or 'sqlserver'.db.vendor=ORACLE
The JDBC driver configured for the application server.
db.drivername=VMJDBC
JDBC connection propertes for the WIP (Work In Process) database.
This is the primary application database.
db.wip.driverclassname=
db.wip.driver.url=
db.wip.host=
db.wip.port=
db.wip.sid=
db.wip.user=
db.wip.password=
JDBC connection propertes for the ODS (Open Data Store) database.
This is the offline reporting and archiving database.
db.ods.driverclassname=
db.ods.driver.url=
db.ods.host=
db.ods.port=
db.ods.sid=
db.ods.user=
db.ods.password=
Flag indicating whether to add DPMO NC codes to NC idat files when a
new update is imported. This value is initially
set by the installer according the the user selection.
dpmo.nc.codes=
The default locale used by the production system. The default locale
is the locale used to display locale
specific text and messages when the requested locale is not
available. This property does not need to
be set if the default locale is english.
default.locale=en
Used when running the build from Eclipse to locate the java compiler
used by the WebLogic EJB compiler.
jdk.home=C:/Program Files/Java/jdk1.5.0_20
Compiler debug mode. If set to 'true', debug symbols will be
compiled into the byte code.
compile.debug=true
Keystore alias
security.alias=xxxxx
Keystore password
security.storepass=ChangeIt
Key password
security.keypass=ChangeIt
Keystore type (jks=default,jceks,pkcs12)
security.storetype=jks
Optional source control build identifier that is to be displayed with
standard version information.
scs.build.ID=
Optional extended version information to be displayed with standard
version information.
ext.info=
custom.properties----
2. How can we change this here?
Regards,
Leon Lu
Edited by: Leon Lu on Aug 4, 2011 11:14 AM
Edited by: Leon Lu on Aug 4, 2011 11:21 AM

Hi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan

How to set up reminders and appointments on my iphone 5

Similar Messages

Maybe you are looking for