How to set up router as base station

Hi -
I've recently purchased an Airport Express for the purpose of playing music from iTunes on my stereo. I've plugged the AE into my wall outlet and hooked up cables to my stereo. The AE is now flashing amber, which I understand means that I still need to establish a connection to a network.
Because my desktop uses a DSL internet connection, I acquired and set up a Netgear wireless router. My goal is to have my AE (as client) communicate with my router (as base station) wirelessly.
I tried using Airport Express Setup Assistant, but it scans for a base station and tells me it can't find one.
When I try using the Base Station Chooser on the Airport Admin Utility, it asks for the IP address and password of my base station. This presupposes that I know how to set up a base station.
Can anyone help me set up my router as a base station?
Thanks
John

When I open up Network Connections, I do not see any
reference to a wireless network. When Netgear
configured my router, did they necessarily set up a
wireless network? If so, how do I find it?
The Netgear is either configured by the supplied Netgear configuration utility or via a web browser.
Check the manual on how to do this.
Also, when I open Airport Setup Assistant, I receive
an error message stating that my computer has no
wireless interface enabled or Windows isn't set up to
manage wireless networks.
In this can you will need to use the Airport Admin Utility rather than the Setup Assistant.
It tells me to either
enable the wireless interface and allow Windows to
configure a wireless network, or to configure the
base station using Ethernet.
Which of these options
should I be pursuing?
Using ethernet, plug the Airport initially into the Netgear router.

Similar Messages

  • How to set Time capsule as base station and airport express to join

    I have a wireless network using an Airport express. Now I would like to have time capsule to be set up as the base station and just the airport express to join this network, in order to listen wirelessly to music, but keep the speed of the time capsule.
    Right now, the ethernet cable is connected to the Airport express. Do I have to switch that to the Time capsule? I tried to do that, but it wasn't able to connect to the internet in this case.... I am lost. Now I have a speedy time capsule, but have the network running on the slow Airport express... Please help!!! And I believe as you guessed already, I am not a smarty, when it comes to networks.
    HELP! Please!!

    I actually have mine set up this way that you are looking to do. Works well for me. here si what you can try:
    Make sure you unplug the Express all together first. It does interfere when trying to set this up. Next setup your TC just like the instruction says (remember no Express). You should just be able to set up your TC, connect to the internet and get going like any other router or like the Airport Extreme. if you set up your TC with your comp and CANNOT access the internet that is your first problem. My suggestion: do a hard reset of the TC if you have already attached it to the Express while also doing a hard reset of the Express - this is to bring them both back to afctory defaults to start fresh. This definitaely helped me.
    So once you have your TC up and running and you have internet access thru your TC, you are halfway there. Make sure your TC shows in the left column of the Airport Utility (and dont forget to install the Airport Utility from the disc that comes with teh TC before you do any of this, forgot that). if it shows up in the left column you should also be able to see the Express in that column, both with green lights, if you have set this up correctly. Then plug in the Express. As the above mentioned remember t make sure it is connected to the correct port on that back of the TC. It will remain amber then blink a few times. This is normal. It should be blinking amber when you attempt the setup of the Express. Your airport utility shoul dnow see the addt base station (Express) in the left column. When you click on it and click CONTINUE it will ask you if you want to switch networks. You can do that and lick switch provided you are already connected to the TC and alrady have an internet connection. Once you click switch the TC will disappear from the left column and you will be left only with the Express. This is OK. I am not in fron to fm y comp right now so I am doing this from memory but in setting up the Express you want to add it to your existing network. You will have to choose which network to add it to in a drop down box in one of those steps - just make sure you add it to the one that you named your TC. Then click to the finish and click UPDATE. Let it finish the update - you shoul dsee green light son both the TC and Extreme HARDWARE - not necessarily in the airport utility. Also it is a good idea to to to the menu bar on top where the WiFi icon is and manually select your network in case you get bumped off while the TC is updating itself after you ckicl update - this happened ot me and it wouldnt complete the update and took me forever to figure out it needs internet connection to complete the update screen.
    next make sure you RESTART your comp. This I guess will make all changes basically go into effect as you cycle it up. When you are up and running you should see your WiFi connect as your TC and NOT your Express. Also go back into airport utility and see if you ahve both items listed in left column - they too should have a greenlight. If they do you should be set.
    I did this because I wanted to steam my iTunes files that I have on my TC to stream to iTunes via my network. The Express part, as you know, is what allows the streaming. So make sure you plug your stereo cable into the Express audio port. Then go to iTunes and on the bottom you will notice a new little drop down box - make sure to select Express so it can wireless stream (in iTunes prefs there is a pref you must turn on also to allow iTunes to see remote speakers.
    Ive simplified this a little since I am not at home but this is the gist. In a prefect worl you should be able to easily have this work. I did so I know it does at least work if not anything else. You just have to make sure you get the steps correct and have everyhing plugge din where they should be...
    G'luck

  • I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

    I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

    What IP address does the TC have and what IP does the computer have?
    We need more info as we really have no idea what your network looks like.
    Modem router, model, type of broadband?
    TC setup as bridge or router?
    Is the computer getting internet via the TC?
    Are you using wireless or ethernet?
    Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
    Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

  • My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
    I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
    If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it?

  • How to get this Airport Extreme base station to produce a wireless network?

    I had this Airport Extreme base station working fine at the house that I moved from a couple of days ago.
    After my house move, however, it seems that the AE base station isn't producing a wireless network. My wireless laptop isn't detecting a wireless network. Also, the left hand side light on the AE base station is not lit.
    The AE base station was softly cushioned during house the move.
    Regarding configuration:
    My non-wireless iMac (running 10.3.9) connects to the AE base station via an ethernet cable.
    Before my house-move, I regularly connected wirelessly via the AE base station from a couple of wireless-equipped laptop computers.
    I was using AE software version 5.6. (In desperation, I have just updated to version 5.7 - but that hasn't improved or changed situation.)
    At the new house, I found that I had to reset the AE base station back to factory settings before I could successfully connect to the internet through the AE base station from the (non-wireless) iMac.
    Since resetting the AE base station at the new house, I can also print via a USB printer that's plugged into the AE base station.
    I just cannot pick up any sign of a wireless network from the AE base station.
    G4 Powerbook   Mac OS X (10.3.9)   Problem started while I had Airport Extreme software v5.6. No improvement/change after v5.7 update.

    Sorry for my delay in closing this issue.
    I got the wireless network running again - though I'm not sure which of a "litany" of separate actions (which I gleaned from dialogs in several similar postings for similar issues to mine) was the solution. I suspect it was one of the following two actions, which have stuck in memory:
    1) I relocated a nearby cordless phone cradle/charger/base-station from alongside the Airport Extreme base station to about seven feet (two meters) away. However, the cordless phone is about eight years old, and I believe its radio frequency is far out of the range that I have read (in similar postings) can interfere with the Airport Extreme base station.
    2) I re-set the Airport Extreme base station, (a) by depressing the tiny reset button at the rear of the base station for more than 5 seconds (until the led started blinking), (b) from Utilities/AirPort Admin Utility/Configure/Restart. However, I had reset the Airport Extreme base station those ways previously without that restoring the wireless network. Also, I didn't record the sequence of the multiple resets and the configurations at the times of the resets.

  • HOW do I get my Extreme base station and Express to join a Linksys network?

    OK... so I have FINALLY enabled my SLINGBOX to view remotely by totally removing my Airport Extreme & Express from the network look. I was told they are both routers and I have to pick one. The Linksys network works fine for all networking purposes... what it WON'T DO is connect my USB printer or stream iTunes to remote speakers. NOW, I have been told by using the Extreme & Express in "client mode" I can do this.
    Basically HOW do I get my Extreme base station and Express to join the exsiting Linksys network?

    Sorry but the AirPort Extreme base station (AEBS) does NOT have a client mode.
    The AirPort Express (AX) does have a client mode. The directions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • How to set the router and play the Command & Conquer using direct IP mode?

    My router is WRT54GFirmware Version: v3.03.1
    How to set the router and play the Command & Conquer using direct IP mode with other computer?

    Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
    can you give a few more details.

  • Wireless router and base station help

    Hello fellas -- I'll really, really appreciate any help I can get with this, so thanks in advance for any advice given. Here we go...
    I purchased a MacBook (2.16 GHz Intel Core 2 Duo, 160GB hard drive, 2GB RAM) about two months ago. It runs Mac OS X Tiger (10.4.9). Previously, I had a Sony Vaio desktop in my downstairs bedroom, and an HP Pavilion desktop in my mom's office upstairs. I have Comcast "high-speed" cable internet service. Downstairs (where the Vaio was) I have a surfboard cable modem with three cords coming out of the back: 1.) a power cord (obviously); 2.) a cable cord that runs into the wall for internet service; and 3.) an ethernet-looking network cable. This ethernet/network cable would have normally run right out the back of the surfboard cable modem and into the network port on the back of my Sony Vaio, but in order to provide internet service for my mom's HP upstairs, the network cable went from the back of the surboard modem and into a D-Link wireless router that we bought. Another network cable then went from the D-Link wireless router into the network port on the back of my Vaio. This provided both my Vaio and my mom's HP with good, steady cable internet access.
    When I bought this new MacBook, it came with an AirPort Extreme card (no base station yet) that allowed me pick up on the wireless signal from the D-Link wireless router and this provided me with internet service. To connect to the internet, I would connect to the wireless network that my computer called "default." By this point, I had shut down and unplugged my Vaio, so it's out of the picture now -- the MacBook has replaced it. However, I left the surfboard cable moden and the D-Link wireless router plugged in, and this way I was able to connect to the default network wirelessly with my MacBook, and my mom was still provided with wireless service from the D-Link router on her HP upstairs. This worked great for awhile, until eventually this default network started getting rediculously slow and started disconnecting itself every 30 to 45 seconds -- literally. For this reason, I went out and bought an AirPort Extreme Base Station at my local Apple Store.
    First, to make sure it worked, I unplugged the network cable (the one coming from the back of the surfboard cable modem) from the back of the D-Link wireless router and I plugged it directly into the base station I just bought. In other words, I took the D-Link router out of the picture and plugged the base station directly into my surfboard cable modem. This worked great, and it's how I'm connected to the internet as we speak -- it's providing me with steady, fast service. Instead of connecting to the default wireless network that was slowing me down before, I now connect to the base station's network, called "Apple Network 2b1d46." There's only one problem, though -- it involved taking the D-Link wireless router out of the picture, so now my mom can't get on the internet with her HP. The solution seemed very simple -- instead of plugging the surfboard cable modem directly into the base station, I would plug the surfboard modem into the D-Link wireless router, and then plug that into the base station. I saw no reason why this wouldn't work, and I still don't, but for whatever reason, it didn't.
    This is where I need help. When I try to plug it in through the router like that, I simply can't get on the internet. Everything else works perfectly -- the surfboard cable modem's lights are properly lit, as are the D-Link router's lights. The Apple base station's status light is a solid green like it's supposed to be, and strangest of all -- when I open Internet Connect to check my AirPort status, everything is fine there as well. It says "Connected to Apple Network 2b1d46," which is the new base station network that I should be connected to, and under that it says "Connected to the internet via Ethernet," yet when I try to open Safari, it says "You are not connected to the internet," which is in direct contradiction to what Internet Connect is simultaneously telling me (that I am connected to the internet).
    I've tried alot of things to trouble-shoot this. I've tried FireFox and Opera, and they can't bring up any web pages either, so I know the problem isn't just with Safari -- it's that my computer just can't connect to the internet or bring up web pages, even though Internet Connect and everything else says that it's connected. I've also run the Network Diagnostics an uncountable amount of times, and all it can tell me, in all its wisdom, is that my internet connection appears to be working fine and that I must have spelled "www.apple.com" (my home page) incorrectly (it says the same thing about any other web page I try to open). I've ran the network assistant to create a new location, and it also gets the the end of the wizard and tells me that it can't connect to the internet. Finally, I've also ran the AirPort Utility multiple times and set up the base station in every possible way, but still nothing works.
    On that note, I do have one question. When you run the AirPort Utility and choose "Assist Me", at one point during the wizard it asks, "How do you connect to the internet?" Right now, remember, I have the D-Link wireless router taken out of the picture (the base station is plugged directly into the surfboard cable modem). For the answer to this part of the wizard, I chose the option that says, "I use a DSL or cable modem with a static IP address or DHCP." Obviously, given that I'm on the internet as we speak, this is working fine. However, if I bring the D-Link wireless router back into the picture and plug the base station into it (the router), and then plug the router into the surfboard modem, should I still have the same option checked (the one thats says I use a DSL or cable modem with a static IP address or DHCP), or by connecting through the router, should I change my answer to one of the other two options. The second option says, "I use a DSL or cable modem using PPP over Ethernet (PPPoE)." The third option says, "I connect to my local area network (LAN)." I've tried all three numerous times, and none of them work -- I still have the same problem getting on the internet once I connect through the D-Link router, but I thought I could at least find out which one is the right option so I could stop having to keep trying all three of them. Can anyone tell me which of those three options I should pick when connecting through the D-Link wireless router (cable modem with static IP address or DHCP, cable modem with PPPoE, or local area network).
    Sorry, I know that was a long one, but if anyone can answer the previous question for me and/or give me some general advice regarding my problem with getting the internet to work once I hook up the base station through the router instead of directly into the cable modem, I would appreciate it more than you can imagine.
    Thank you very much for your time and help.
    -- Andrew

    I am doing something similar. I have the WAN port on my Linksys 4-port wired router connected to my DSL modem. My G5 and G4 computers are connected directly to the Linksys LAN ports. My older Airport Extreme (flying saucer) is connected to another LAN port on the Linksys. I had to setup the Airrport as a bridge in this configuration. I did this by using the Ethernet LAN port on the Airport instead of the WAN port. In the Airport Setup Utility I said to connect using Ethernet. This seems to work for me.
    I also use manual IP addresses for everything but you will probably want to use DHCP.
    Cheers,
    -= Ken =-

  • How can i use an airport base station and multiple airport expresses with U-verse and still use wireless tv boxes?

    I just got uverse, and when I put my Airport Base Station in Bridge mode I lose access to the 4 airport express stations I have. Can anyone tell me how to turn off the u-verse wireless, set up a network with all the apple stations and still have wireless u-verse tv boxes work? Thanks!

    Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
    Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
    What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

  • How do I know which AirPort base station I am connected to?

    I have an AirPort network which consists of a Time Capsule and 2 AirPort Expresses connected in 'extended' mode. I want to test each of the AirPort Express units to ensure that they are doing what they should be (i.e. extending my network). However, I can't figure out how to determine which base station I'm actually connected to at any given moment. When I look at the AirPort status in the menu bar or at Network Preferences it simply tells me the name of the network that I'm connected to but not the specific AirPort unit. Is there any way to see this information?
    For all I know, I could be connected to the Time Capsule no matter when in my home I'm located.
    Cheers,
    Barry

    OK, let's recheck some settings as you definitely should not be picking up a wireless signal from the TC if you have an Express much closer to the computer.
    Using AirPort Utility here, click your TC and click Manual Setup.
    Click the Wireless tab below the icons
    Wireless Mode should be set to "Create a wireless network"
    There must be a check mark next to "Allow this network to be extended"
    Update to save any changes.
    On each Express, using Manual Setup again.
    Wireless Mode set to "Extend a wireless network"
    The network name that the TC is creating should be displayed
    There must be a check mark next to "Allow wireless clients"
    Please check your settings to verify. Then start with only one Express device and put it in a another room not too far away from the TC. Power it up and keep your laptop close to the Express. Using the "option" click on the Airport icon, test to see if you see the MAC address of the Express. Any luck? If yes, then power down the first Express and test the second the same way, etc.
    The "extend" a wireless network feature works like the hub and spoke of a wheel. The main router is the hub and Express devices are at the ends of the spokes. Each Express communicates directly with the TC. There are no "relays" or "in between" devices. If the TC is at one end of the house, you may find that you get better results using fewer Expresses. It will take some experimenting to get the best location for each Express, etc.

  • Problems setting up AirPort Express Base Station

    I'm a real newbie at this, so pardon the ignorance in advance haha.
    I just bought a new Airport Express base station. I wanted to be able to stream my music via iTunes to my living room. I'm just having problems getting the aiport utility to recognize the base station. I have the base station plugged in and everything. Right now it is flashing the amber light.
    This is my set-up. I have a Netgear WGR614 54MBPS wireless G router connected to my broadband modem. From the router I have it connected to my desktop thats running windows xp pro. The network is up and running just fine. I can connect via any laptop or other device with wifi. Now, how do I get my wireless router to pick up the base station? Do I have to wrong idea here or something? haha. thanks in advance!

    In the Airport Utility for your Airport Express, you should set the Airport Express in "client" mode. You might have to connect your Airport Express directly to your router with ethernet cable, while doing this. If you are using encryption, make sure that you enter the encryption number onto the express that your router/access point is using. Again, if you plug the Express directly into the router, you should be able to modify the settings quite easily. Once you unplug the express, it will blink orange for awhile (maybe a minute), so wait a bit.
    Good luck.

  • Setting up airport extreme base station with Mac and PC

    I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to me without any manuals/disks etc)

    Your Netgear wireless router is your network's base station. Your parent's PC will not be "serving as a base station" - its presence on the network isn't at all relevant to what you want to do.
    To connect your G5 to the Netgear wireless router's network - click on your Mac's Airport menu, click on the name of your Netgear wireless router's network (it will appear in the list when you click on the Airport menu), and enter the wireless network password (if applicable) when prompted by the MacOS. That's is - you are connected!

  • How do I create an imac base station wireless network with Airport?

    I just got the Macbook Pro and have a G4 imac with an airport card installed. I'm trying to create a network using my imac as the base station - any suggestions on how to do this?

    Thanks for your response!
    Unfortunately, it doesn't seem to be working. I was following the excellent directions in the attached PDF, when, on page 11 (or was it 10?) the directions just stopped at number 3. It seems there need to be more steps...
    http://manuals.info.apple.com/en/DesigningAirPortNetworks.pdf
    I've followed the step-by-step given on the link you shared - which matches what is found in the PDF. I've done all of that for my imac. However, I'm not sure exactly what settings need to be set on my macbook pro to get it to connect to the internet. I'm close - so close! - as the airport in the menu on my macbook shows 4 bars - but when I try to connect, nothing.
    So frustrating! Any help would be golden...

  • Set up an airport base station

    I am trying to use a family members Internet thru wifi and the network shows up as a airport base station. It says that it cannot be set up by this software.
    So how can I connect to wifi on my iPad 4? My iPhone 5 had no problem identifying the network like usual set up of wifi?

    Since you have an iPad question here....you really should post in the iPad support forum. The experts over there may have some additional ideas for you.
    Using iPad

  • In a WDS, how can I force a satellite base station to connect directly to the main station

    I have 2 Airports Extremes (Call them A and B) and a Time Capsule set up in a WDS. All are recent vintage at V 7.6.1 firmware. Airport A is the main base station connected to the internet via ethernet to a cable modem. The satellites, Airport B and the Time Capsule, are in opposite corners of the house. Airport A is in a media closet in the middle of the downstairs, Airport A is on the east end of the house, about 40 ft away, with a wood door and drywall wall in between. The Time Capsule is on the west side of the house, with just the floor/ceiling in between it and Airport A.
    When the WDS is functioning normally (most of the time), both satellites connect directly to the main station, and Airport Utility describes each connection as Excellent. But at least once a day, one of the satellites will connect to the other satellite, not directly to the main station. When this happens, Airport Utility describes the connection as Good or Average and my online throughput decreases by about 5 fold in both directions. The only thing that works every time to get it back to it's proper setup is restarting all three, which is really a pain.
    Is there any way to force the satellites to connect directly to the main station?

    So is it possible to connect a non-USB Mac to an
    Aiport network through the ethernet port in any way?
    Yes
    Using something like the Linksys Ethernet Wireless Bridge WET54G.
    Original Airport Card Alternatives
    http://tech.ifelix.net/1030.html

Maybe you are looking for