How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

Similar Messages

How to set a prefer outgoing email, so i can start sending emails please?

how to set a prefer outgoing email, so i can start sending emails please?

If you use iCloud mail: iCloud- Mail server settings for email clients.
Mac Basics- Mail (OS X Mountain Lion)

How do set operation timeout in tomcat server?

hi all
suppose i have one endless loop program(jsp) that program run under tomcat server,
so it's keep on runing in tomcat server.
i want, after some time the server send error message like operation timeout.
how do set operation timeout in tomcat server?
if anybody know help me.
my mail id [email protected]

Well, the server.xml file has connection time outs, but that is for idle time, I think... I'm not sure what would happen in a loop... , especially if you are sending some data back to the client in each iteration. Generally you shouldn't be starting a loop that will really run forever. Maybe have some type of counter to break out if something hasn't occurred within x iterations, or create a separate thread that can sleep for x seconds and set a flag to break the loop after that time.

How to set up the "incoming Mail server" for google apss account

how to set up the "incoming Mail server" for google apss account

The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server. You'll have to ask them about it.

How to set up just an email account? - it's not working

Hi there,
Could someone please let me know how to set up just an email account for a staff member?
I tried "E-mail Accounts" - Add an email account - but the password verification NEVER comes through. I've tried send password recoved but does not work (ive deleted it and tried 3 different Password recovery e-mails - gmail / local and another BC one too).. nothing is working.
So then I read the knowledge base which is out of date:
http://kb.worldsecuresystems.com/000/bc_8.html?bc-partner says to set up an email account you need to go to Site Users (which doesn't exist) to tick "enable email" - so I tried Admin users but it has no email only option..

Hi Dandy,
You can still switch to V2 view to find things. Something I am still doing when I do these irregular jobs, as they only happen when a site goes live and that will only be once a month for us. Twice some months.
Although I just tried going to V2 and getting up the V3 view, but it didn't send me to the page I wanted.
I notice that there is a new tab in V3 called Email accounts, where you can set up email accounts now. Try there.
You will need to have the user set up first under Admin Users and User Roles first I expect.
Also check workflows are set up properly once you have gone into Email Accounts and set up the email address.
Or maybe just go back to V2 and do it all there. Click in top rh corner to get back to it.

I just got an ipad mini and I dont know how to set up an icloud email, please help?

I just got an ipad mini and I dont know how to set up an icloud email. I know I have an icloud account but it is set up to my gmail. Can someone please help?

Have a read here:
http://support.apple.com/kb/ht4810

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hola Jose David, que OPC estas utilizando?, Si tienes comunicación entre tu computadora y PLC pero falla la comunicación entre el OPC y el PLC? La configuración y direcciones entre los dos es correcta? La comunicación es por cable serial?
Espero tus respuestas
Saludos
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

How to Edit Contact List with email

How to Edit Contact List with email ID in the heading
Regards,
Charles.KE

eh? Can you please give some detail of what you're attempting to do ?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

How to set this filters with 'or' relationship

Hi Pros,
      I have a query as follows, rows and columns are all in structures.
                                                   regular_employees
             active_employees
             lay_off_employees
     I want to set up filter as ' employ_status = 0 or employ_subgroup =2' for this query, please tell me how to set this filters with 'or' relationship.

Hi Yifei,
Create a formula and enter this (let's name this FORMULA_KF):
((EMPLOY_STATUS = 0) OR (EMPLOY_SUBGROUP = 2)) * enter value IF_TRUE + enter value IF_FALSE
Then create the condition to HIDE the rows having those values to be filtered (if this is your purpose)..
Like,
FORMULA_KF <> 1
Is this what you want mate?
Regards,
Loed

HT5312 How to set up my rescue email account,so that can reset my security question?

How to set up my rescue email account,so that can reset my security question? The key is I need change my security question

You won't be able to add a rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

How to set task description with paragraphs at runtime

Hi Experts, How to set task description with paragraphs at runtime. Now, i can set single content in task description.however, not sure, how to set content which have paragraphs.

Hi,
You can use HTML tags in the Task descritption.
Open the task not the workflow and there you can provide
<p> content/containers </>
You can use even <u>- Underlined text.
<h> for bold text
Thanks,
Sarayoodharan.K

How often syncs Firefox sync with the server were my bookmarks are storaged? Can I turn of the historical sync because one computer is at home and the other is at work. So I use totally different webpages and would like to have the history disabled.

How often syncs Firefox sync with the server were my bookmarks are storaged? Can I turn of the historical sync because one computer is at home and the other is at work. So I use totally different webpages and would like to have the history disabled.

OK, I found the part about history. It is just to unmark that.
But still i wonder how often it sync? Instantly? Or when closing FF?

How to set up basic POP email on N8

I've been reading up on all the email discussions about the N8, and it seems like some things work fine, while others need more development.
In my case, I would like to set up email using a basic POP email account setup. I have no need for "push" email right now - as I see it, receiving an email every half hour or so on my phone is an improvement over waiting until I get to my PC.
Ideally, I would like to leave the messages on my email server, so they will later on be downloaded to my PC.
I've noticed the following in one of the email discussions here:
"Cant believe no one else has responded with this before given the time this thread spans. I had this problem until I deleted and re-created my email (POP) accounts and then NOT accept the TOS at the end of the setup process. If you say YES and accept the terms, then your email accts get setup thru the Nokia messaging service and sent emails may get saved somewhere, but certainly not on the phone. You do not have to say yes to the TOS, just decline and finish setting up the email account."
Since I'm perfectly happy with the way email works on my laptop, using my existing servers, I think I should decline the TOS as described above.
I've found lots of guides on how to set up email on the N8. Can anyone here recommend one for how to do (only) what I need, in order to manually set up POP email on a N8, using the identical server information and settings that I now have on my laptop? Or, if this doesn't exist, can someone post the necessary steps here?
Thanks!!!

I have had a little play with this but will just outline what I found seems to happen because I did not thoroughly test it. Others experiences may be different.
If setting up a new account and one selects one of the listed email service providers and not "Other" then it sets up an IMAP account and gives the choices that Rayhipkiss describes together with the terms and conditions acceptance request. This can be seen after the setting up by looking in the settings for the server (which often, maybe always?, is a nokia.supl.imap one). If one deletes the server and server ports and replaces them with the same email service provider's pop and smtp servers and ports then the same setup choices that Ray mentions still remain. Once the account is set up you can always go back and change the server and port entries in the N8 setup for that account (see below for a difference).
However, even though one has set the pop ports it still seems to do an imap connection - this can be tested by setting up a Gmail account where one can turn off and on allowing imap server connections in the settings on ones Gmail account's setting on the webmail site. One finds that disallowing imap connections but allowing pop connections blocks the N8 even if one has entered the pop servers and ports on the N8.
Now, if when setting up the account on the N8 one selects "Other" it normally (see below) gets one to enter the address and pass for the account and then goes straight to allowing you to enter the servers and ports. Now if one enters these and it then takes one straight to the client for you to collect and send email. But now if you go back into settings for that account one gets the setting choices that I outlined i.e. the one that includes "Don't sync to server". If set up as a pop account it seems to behave as a pop account - for example, if one turns on the imap servers at the Gmail denying pop connections then if one tries to collect mail Gmail comes back with a certificate error (the certificate is for imap not pop). Unlike the settings menu giving the other settings Ray outlines this settings menu does not allow one to nominate a reply to address different to the address sent from and nor does it allow one to go back and change the server and ports. To change the server and ports as far as I can see if set up this way one has to reset up the account from the start.
OK, even stranger, then what I found is if I set up an account using the offered service providers, not using the "Other" choice then deleted that account and then reset up the same account using the "Other" choice it then behaved as Ray outlines including the terms and conditions acceptance request and also behaves as an imap account even if one enters the pop servers and ports. So the "Other" account setup choice seems to behave differently according to whether one has previously setup that account using one of the non "Other" service provider choices or not?????
I don't know if anyone wants to experiment further and discover more or clarify the behaviours. I just did some quick playing around so did not analyse it much, however the above is the general gist of what I found. It is sometime since I set up email accounts on my E52 but from memory it behaved much the same way as the N8 does and is generally weak on handling pop accounts - in fact I would suggest that many who think they are using pop servers will find that behind the scenes it is really using imap ones.
A real downer for me is for a pop account there seems to be no way to set up a reply to address in the sent emails that is different to the address sent from. This need for me being due to the way I manage emails across several machines.
I'm off to have a beer

How to set FROM ADDRESS for EMAIL activity in Process Flow

Hi all,
Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
Thanks,
Suvvi

Did you set what OWB guide says:
To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
(’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
The ACL has no access control effect unless it is assigned to network target.
2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
3. Commit the changes made using the COMMIT command.

How to set up SAPconnect with email server

Similar Messages

Maybe you are looking for