How to set up screen resolution for actual size zoom?

I have a monitor with 109 ppi resolution, and I`ve already set this resolution in photoshop and acrobat preferences, but i can`t find where in illustrator cs5 it can be set up, so i would be able to preview my artworks in correct actual print size.

Go to Edit > Preferences > User Interface and select Scale to lower supported Scale factor.
This will reset adjust the UI to 100%. You can hover over the info icon and see more details.
This happens because your OS scaling level is higher.
Good Luck.

Similar Messages

How we will maintain screen resolution for tmaintaining able control in BDC

how we will maintain screen resolution for tmaintaining able control in BDC. can you give the code or how we have to set it

Hi,
You need to use the CTU_PARAM options with the call transaction method.This is used if you would like to do a commit work once call trnasaction is done. This has also got very important property, for example if your Screen resolution is different from others then the screen (Application) will be different that is you'll be having say 5 lines in your screen where as your friend will be having 8 or 10 so your program might fail in this case. If you set variable DEFSIZE as 'X' it will always use the default screen size and hence avoids error.
Use CALL TRANSACTION 'XXX' OPTIONS FROM w_ctu_params.( type CTU_PARAMS)
This structure contains the follwing.
DISMODE : Display mode (like the MODE addition)
UPDMODE: Update mode (like the UPDATE addition)
CATTMODE: CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
RACOMMIT: Do not end transaction at COMMIT WORK
NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND : No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
This might help u in better understanding...
Re: regarding bdc
Re: ctu_params
Regards
Sudheer

How to set Dynamic screen resolution in flex..?

Hi All.,
I am developing a flex application in adobe flex4. to set the application height is 100% width is 100% and using <flexmdi:MDICanvas> to set the height 780 ,so application get displayed on normal window correctly., But i try to press f11 key the screen size is expanded at the time application size is set exactly, MdiCanvass size is not expanding on screen resolution.
My question is how can I make sure that the application should look uniform across different platform/different browsers and different monitors to display screen resolution auto adjust in mdi canvass also.
With Regards.,
LinFlex-

Hi,
Use the below syntax...
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data
Jogdand M B

I want to be able to monitor my teen daughter's computer from home using screen sharing. Anyone know how to set up screen sharing when my daughter's school has her computer set up for Apple Remote Desktop?

I want to be able to monitor my teen daughter's computer from home using screen sharing. Anyone know how to set up screen sharing when my daughter's school has her computer set up for Apple Remote Desktop?

ARD won't be as smooth as you think over the Internet and be a security risk for your daughter.
Your best bet would be to install nannyware, then when she's asleep you can review the logs.
This is the best and Mac friendly
http://www.internetsafety.com/

[solved]Different Screen Resolution for different Users[/solved]

hello
i'm running kdemod
i'd like to set up an account for my mum
she prefers a resolution of 800X600
whereas i like 1024X768
my xorg.conf is set up like
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
when i log into the newly created account and use nvidia-settings
the resolution can be changed successfully
but upon restarting
it reverts back to 1024X768
i'd like to know how i could set up different resolutions for both of us
Last edited by nikbhardwaj (2009-10-03 12:23:21)

arkham wrote:You could add a startup script for your user with "xrandr -s 1024x768", while adding another for your mother account with "xrandr -s 800x600"
where do i add this
.xinitrc in the home directory ??
or .xsession in the home directory

How do i fix screen resolution message

Your screen resolution is set below our minimum recommendation of 1024 x 600 pixels.
my screen resolution is already set at it's highest: There is a screen resolution problem Your screen resolution is set below our minimum recommendation of 1024 x 600 pixels. You can continue with your current settings, but the newest version of Yahoo! Mail may not display properly. Try increasing your screen's resolution (In Windows or Mac OS Help, search for "screen resolution"). If you're using most versions of Windows, here's how: Right-click on the Windows desktop and choose Properties. In the Display Properties dialog box, click the Settings tab. Use the slider to set your Screen resolution to 1024 x 600 pixels (or higher)There is a screen resolution problem Your screen resolution is set below our minimum recommendation of 1024 x 600 pixels. You can continue with your current settings, but the newest version of Yahoo! Mail may not display properly. Try increasing your screen's resolution (In Windows or Mac OS Help, search for "screen resolution"). If you're using most versions of Windows, here's how: Right-click on the Windows desktop and choose Properties. In the Display Properties dialog box, click the Settings tab. Use the slider to set your Screen resolution to 1024 x 600 pixels (or higher)..

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

How to set the screen size with nested Iview screen

Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu

How to change the screen resolution in Sparc workstation.

I am using the CDE screen to login. I need to set the screen resolution to 1100*864. How to set?
solaris 10 current setting is 1280*1024.

Specs for Ultra20 machine list ATI graphics as " onboard " chipset and the availability of four (4) other plug-in cards as options.
Depending on the installed graphics card, you must seek different commands, etc. for each change of resolution.
If you do not have the original manuals that accompanied the unit, check Sun`s site for documentation. They list an abundance of info and the " Getting Started " book gives indepth details about setting up the various graphics options for proper use with the various operating systems. ....................... John.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

How do I adjust display resolution for Mac Mini?

How do I adjust display resolution for Mac Mini? Text does not look crisp. Using Samsung 27 inch monitor with HDMI input

Apple menu -> System Preferences -> Displays. Depending on your version of Mac OS X, it may be set for "Best for Display" in which case it should already be set at the optimum for your monitor, or it may display resolution options in which case you should set it for the native resolution of your display.
Regards.

What should I set me screen resolution to in photoshop CC with my late 2009 27" iMac?

What should I set me screen resolution to in photoshop CC with my late 2009 27" iMac?

If its native resolution is 2560x1440 then some people do find it marginal with a 27 inch screen, but I'd have thought it workable if you know where everything is. People are using that screen res on tiny laptops, but to be fair, they are not much liking it with Photoshop.
I don't know how Retina support works with CC, but I wonder if you could force it on your iMac?
Any Mac users out there know how Retina support works?

How to set up screen resolution for actual size zoom?

Similar Messages

Maybe you are looking for