How to set up security to disable router

I had a Geeksquad install my security in router but unfortunately by no apparent reason it was disable .
Can you please help how to activate it ?WRTG5 router
Thanks.

Hi…logon to router’s setup page, open I.E. on computer and in the address bar type 192.168.1.1 it would ask you for username and password, put “admin” (default password for router) as password without any username, linksys setup page would pops up…click on wireless tab>> wireless security >> setup WEP or WPA select any of these security and save the settings.

Similar Messages

How to set mac mini to virtual router

how to set mac mini to virtual router.

Hi James,
It's Internet Sharing you're looking for in System Preferences>Sharing, which can share your connection, say from Ethernet to other computers/devices using Airport/Wifi.

How to set up time capsule with router

I have a router N 300 and would like to buy time capsule but I did not find any information how to set up bouth devises. Thanks

You can always bridge the Time Capsule.. it is easy. Once bridged the time capsule will no longer route. All routing is then handled by the original router.. N300 (which could be belkin or netgear and maybe other people call then N300). It will still work as a wireless access point.. unless you turn it off, a switch with WAN now allocated to LAN, and a network drive.
Just look up bridge.
But there are other ways to do things. You could replace the N300, unless it is a modem.. in which case you can bridge that and use pppoe client on the TC (if you ISP does pppoe).

How to set wsse:security SOAP header in soa 11g?

Hi,
we are facing an issue with invoking a secured webservice.
we tried 3 things
1.) set the username/password in em under reference properties
2.) Created a schema, set the username/password and included it in partner link header tab.
3.) added a client token policy in em and then set http authentication field.
all these not working.
the error we are facing is :
Non Recoverable System Fault :
javax.xml.ws.soap.SOAPFaultException: Missing <wsse:Security> in SOAP Header
complete payload is below:
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>Missing <wsse:Security> in SOAP Header</summary>
</part>
<part name="detail">
<detail>javax.xml.ws.soap.SOAPFaultException: Missing <wsse:Security> in SOAP Header</detail>
</part>
<part name="code">
<code>wsse:InvalidSecurity</code>
</part>
</remoteFault>
</bpelFault>
Please let us know how to proceed with this?
Thanks in advance
Regards

You need to attach the below policy in security section (Select your partnerlink in the references section of composite.xml and the click on "Configure WS policies")
oracle/wss_username_token_client_policy
if it is Secured Webservice, then attach this policy
oracle/wss_username_token_over_ssl_client_policy
After attaching policy, click edit and configure the key(out of box, u see one key csf-key) . This key should be setup with the required username and password that matches with the Webservice expected username and pwd.
Thanks,
Satish
http://soadiscovery.blogspot.com

How to set wireless security for Officejet Pro L7750 printer?

Hi there.
I connected Officejet Pro L7750 to wireless broadband router and all is well. Only problem is that all computers on the network can install the drivers and connect to the printer. How do I limit the printing capabilities only to 2 computers so the rest of the network won't be able to print to this printer?

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

How to set portal security context for a procedure

Hi, I have procedure that needs to call some of the PDK APIs (WWSBR_API), but outside the scope of the web browser, i.e, automatically via a DBMS_JOB or queue. There is no HTML outputted, but rather a log entry made to a custom table.
The schema that this custom pkg belongs has all the necessary grants made to it from provsyns so that it should run.
How do I programatically set the context of the portal security so as to make the PDK APIs think it has been invoked by a Portal Adminstrator or a user with sufficient privs to perform the actions against the PDK and therefore not bomb out with security exceptions? I have seen this documented quite some time ago, but cannot find the details.
Regards
John

You need to use the wwctx_api.set_context procedure.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk11scp.htm

How to set user security on dimension levels?

Hi, there. I am considering setting use access right to specific levels on the branch dimension.
Suppose there are four companies on level 1 of the branch dimension. I would like to limit users only access their own company.
How should it be done in share service? Thanks.

Thanks both.
However, I encountered another problem. After created users in shared service, I could not see it in
application even after refresh secutiry.
Another problem is that I could not apply filters by Essbase administration console. The Edit User/Group access function is disabled.
Therefore, even I selected a user I could not apply the filter. Does anyone know how to enable the function?
Thanks in advance.

How to set LSNRCTL security off?

Hi all, can some one tell me how to turn off the security for lsnrctl??
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
Start Date 24-MAR-2008 12:01:07
Uptime 0 days 0 hr. 3 min. 21 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Thanks.

The listener security has change from previous 9i versions to 10g
In Oracle 10g, the listener now uses local OS authentication. As long as one runs lsnrctl
as the same user as the running listener they will be able to fully administer
it without providing the password.
This security feature is enabled by default and can be identified at listener
startup, or when issuing a LSNRCTL STATUS command, by the following output:
Security ON: Local OS Authentication
If you set a listener password, lsnrctl status command show
Security ON: Password or Local OS Authentication
Message was edited by:
tarrio

HT5622 How to set new security anwser?

Dear Sir or Madam
sorry,i have already forget my security anwser, and didnt set the aid email,now what should i do,how can i reset the new security anwser？

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97886)

Where and how to set a security code for wi-fi connection

I am running OS 10.8.5 on my MacBook Air and have an Apple Wi-Fi personal connection. I havn't needed a security code for my network but we are trying to add a wi-fi connection to our Dish Network Whole Home system which consist of two receivers. In the set-up procedure it asked for a "Security Key" and we don't have one. I cannot find anything that will work in this step and it will not connect w/o one. I do not how to do this nor can I find an area for this option. Can anyone tell me how to do this ? The Dish Network "connection kit" is set up for wireless. I have tried the #'s on the modem itself and various others I found in the system preferences under wi-fi. I am at a complete loss here !!!!!!
Thank you in advance for your help b/c I KNOW there is someone out there that knows how to do this. And....it likely is a very easy thing to do - just not me !!

Contact Dish technical support since it is their product.

How to set up Airport Extreme wireless router

Hello. I am trying to connect my Airport Extreme base station to my phone line connection.
From the phone line there is an ADSL filter which has a RJ11 output and phone modem. I purchased a RJ11 to RJ45 (Ethernet) and tried to plug into my router. The airport extreme doesn't recognise anything being plugged in!
My ISP is TalkTalk. This is a secondary router. Other one is a Netgear using downstairs phone modem.
Any help would be grately appreciated
Sam

Thanks for your answer.
So if i buy a DSL modem and go Phone line > DSL modem > Airport Extreme > Mac / WiFi - will that work?
Do you recommend any specific DSL modems that dont use USB (or USB...)?
Thanks

How to set up secure chat?

I have the app loaded but can add buddies.

Are you referring to Secure Chat for Facebook? If yes you need to contact Ultiapp, LLC for support. You did notice the 1 star ratings?

How to set Jboss Security?

Pls tell me in details or give me an website address.
Thanks in advance!

http://www.javaworld.com/javaworld/jw-08-2001/jw-0831-jaas_p.html

How to set security type for lenovo working with hotspot?

How to set wireless security type for lenovo laptop working with hotspot?
Since I can connect with the other laptops except this brand.

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

I cannot set new security manager.

How to set new security manager if there is one that is installed. It always raises an exception.

this is not really a JMS question.
anyway - you can't change a SecurityManager after it has been instatiated. what you can do is run the JVM with the -Dsecuritymanager= propert.y

How to set up security to disable router

Similar Messages

Maybe you are looking for