How to set up tc as just a back up and disable wireless

i want to set up a used TC as just a back up and keep my new netgear wireless router.  How do I set it up? thanks. p.s. new to mac

Go into your Airport Utility and click on the wireless tab then click the drop down to turn it off.

Similar Messages

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

    How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

    Hi,
    According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
    I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
    Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
    Here are some detailed articles for your reference:
    https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
    http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
    Thanks
    Best Regards
    Jerry Guo
    TechNet Community Support

  • How to set MM02 should not allow to change account and costing view

    Hi all guru's
    How to set MM02 should not allow to change account and costing view details for orher users expect me,plz help me
    thanks
    ramesh

    Hi Ramesh,
                       Use the Authorization Object:  M_MATE_STA     Material Master: Maintenance Statuses
    Below are the Views for the MM02, Field STATM
    Whichever not wanted to be changed, please dont provide them.
    A     Work scheduling
    B     Accounting
    C     Classification
    D     MRP
    E     Purchasing
    F     Production resources/tools
    G     Costing
    K     Basic data
    L     Storage
    P     Forecasting
    Q     Quality management
    S     Warehouse management
    V     Sales
    X     Plant stocks
    Z     Storage location stocks
    Regards,
    Yawar Khan
    Edited by: 1234_abcd on Jan 10, 2012 8:14 AM

  • TS1646 I want to pay 4.99 for my game, however, it shows "your purchase could not be completes." I have no idea how to solve it. btw I just changed my location and payment option for my APPLE ID.

    I want to pay 4.99 for my game, however, it shows "your purchase could not be completes." I have no idea how to solve it. btw I just changed my location and payment option for my APPLE ID.

    If you are getting a message to contact iTunes Support then to do so (these are user-to-user forums) :
    - go to http://www.apple.com/support/itunes/ww
    - click on your country's flag
    - click on the Contact Support at the bottom of the left-hand column
    - click on Contact iTunes Store Support on the right-hand side of the page
    - then Purchases, Billing & Redemption

  • My sons ipod keeps coming up with security questions when trying to conect to apple store. We try to answer or set up but it just goes back to the begining. can you help ?

    Hi - My sons ipod touch keeps coming up with three security questions when trying to conect to apple store. We try to answer or set up but it just goes back to the begining and asks again . can anyone help ?

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • How to set up Yosemite 10.10.1 to print and scan using CANON PIXMA MP780 (on MacBook Pro). Thanks. Bozdogan

    How to set up Yosemite 10.10.1 to print and scan using CANON PIXMA MP780 on MacBook Pro (Pre-Yosemite operating system OS X10.6.8)?
    Yosemite 10.10.1 doesn't seem to support MP780. Also, CANON doesn't have a driver for Yosemite 10.10.1 for its MP 780 series.
    Thanks. Bozdogan  (at [email protected])

    I believe you should be able to print wirelessly using your MBP and printer. However, you will want to visit the Canon home site and download the current drivers and firmware for your printer. Once you've done this, I hope you'll post back with your results.
    http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_serie s/pixma_mp780#DriversAndSoftware
    http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_serie s/pixma_mp780?pageKeyCode=prdAdvDetail&docId=0901e0248039b1dc
    You're going to need both drivers and firmware.

  • I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    Mail window may be in the Full Screen mode.
    Move the mouse pointer to the top right corner of the Mail window and hold it there.
    Menu bar should drop down and click the blue double arrow icon.
    Full Screen toggle shortcut:  control + command + F

  • My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    Hi eleni_georgia,
    Welcome to Apple Support Communities.
    The article linked below provides some additional tips that will help you resolve the audio issue that you described.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers!
    -Jason

  • I just logged back in and suddenly found that my my My Music playlist had been wiped.

    I just logged back in and suddenly found that my my My Music playlist had been wiped except for the last track.This is genuinely depressing for me as I had probably hours of that giant playlist built up that I would leave on shuffle throughout the day, is there any way I can get any of that back? I know i didn't just wipe it as So Happy I could Die by Lady Gaga (the last song I added) is still on there.

    Hello & welcome to the community!
    I'd reccommend you to contact support here so they can help you. They can restore playlists to previous states.
    If you receive an automated email telling you to check the help section or the community, you need to reply back to it, even if it's from a no-reply address.
    Support usually answers within 24-48 hours.
    Hope this helps! ♫

  • Setting up new iphone from a back up and it's trying to sync all apps, this is going over memory capacity.  it's also not bring over any of the music that i had on my old phone, any help greatly appreciated. thanks

    hi,
    i'm setting up new iphone from a back up and it's trying to sync all apps, this is going over memory capacity.  it's also not bring over any of the music that i had on my old phone, any help greatly appreciated. thanks

    Geesh - all this information and no  one has any clue to this? Not even someone from Apple?
    Can someone at least point me in the right direction?

  • How do I find out my password to back up and restore my new iphone 6? Its not the same as my iTunes password..

    How do I find out my password to back up and restore my new iphone 6? Its not the same as my iTunes password..

    I am guessing you are talking about an encryption password that you placed on the backup you put into iTunes on your computer.
    If so, you elected to encrypt your iPhone's backup.  You will need to recall that password, or you cannot access the backup.

  • NEED info on How to Set Router to access just one website???

    Ok here we go again, Finally found out it's my Linksys not letting me onto one website..I had a 310N and thought that was the problem so went out and bought a 610N ..same darn thing just won't let me access one website I need to sell my goods for income. I remove linksys from my modem and plug it directly into one of my computers and I got the website..Yes it's a Linksys problem !!!
    I need some info on how to set up a access point in my router's setting to let me log on to this website www.denofangels or http://74.86.166.210/
    Is it time for me to call the support team??????????????
    I'm running XP on my computers, have 3 of the 4 computers using wirelessN adapters and on the main computer is the WRT 610
    Help Please ....linksysDoll
    Gone Nutz trying to figure out Linksys again!!

    MY Internet provider is Time Warner / Roadrunner cable..Does this help you to solve my problem. Nothing wrong with the modem..just my wrt 610N settings, I'm guessing it carried over from my wrt 310N..this was working fine until a couple of months ago and then nothing for this one website.
    I'm running XP
    Thank you in advance for any help or info
    Gone Nutz trying to figure out Linksys again!!

  • How to set up Airport Express to extend Buffalo WHR HP 54g wireless router

    Contrary to what official Apple policy is, it is possible to use Airport Express as a remote repeater using a Buffalo router.
    I sent hours setting up this network and wish to share what I learned
    I only wanted to use the Airport Express as a repeater to distribute the internet to the far reaches of the house--no iTunes, no Printer, and I did not bother setting security.  If you want to add any of those features please make sure that the basic setup is working as described below.  I have no idea how to successfully set up these features.  My advice is to search the internet for guidance.
    Anyway:  how to set up the Buffalo wireless access router to work with Airport Express
    Setting up the Buffalo:
    From the routers home page of 192.168.11.1, hit the "advanced" box at the top
    1.     Go the "Wireless config"   "basic" item.  Give name to your network (spaces are allowed), lets call it "WIRENAME" and select wireless channel 1 or 6 or 11. These channels have the least interference and will tend to work when the others do not.
    2.     Go the the "repeater" item under Wireless config.  . " Enable" repeater/bridge (WDS).  Next register the MAC address of the Airport Express.  Record both the LAN and Wireless MAC addresses. 
    That is about it.  Your Buffalo system Info page should look like this
    Model             
    WHR-HP-G54 Ver.1.40        (1.0.37-1.08-1.04)                       
                        AirStation Name              AP001D73DEB2D6                    Operational Mode                Router Mode                    WAN                                                                                                                                                                                                                                                                                                                                                                                                      
    DHCP
    Connection Status
    Communicating
    Operation
    IP Address
    myinfo
    Subnet Mask
    255.255.255.248 
    Default Gateway
    my info(Via DHCP)
    DNS1(Primary)
    my info (Via DHCP)
    DNS2(Secondary)
    my info (Via DHCP)
    Host Name
    my info (Manual Setup)                  
    Domain Name
    earthlink.net (Via DHCP)
    MTU Size
    1500
    DHCP Server Address
    10.108.48.1
    Lease Acquired Time
    2006/01/04 12:03:15
    Lease Period
    2006/01/05 12:03:15
    Wired Link
    100Base-TX                                (Full-duplex)                          
    MAC Address
    00:1D:73:xx:xx:xx
                        LAN                                                                                                                                                                                                                     
    IP Address
    192.168.11.1
    Subnet Mask
    255.255.255.0
    DHCP Server
    Enabled
    MAC Address
    your address recorded in the repeater tab
                   Wireless(802.11g)                                                                                                                                                                                                                                                                                    
    Wireless Status
    Enabled           
    SSID
                                          WIRENAME
    Encryption Mode
    Not Configured           
    Wireless Channel
    11Channel                 (Manual)           
    125* High Speed Mode
                                 Disabled           
    MAC Address
    your address recorded in the repeater tab
    For the Airport express: here is a summary of what the settings are:  Start Airport Express Utility and when it comes up
    Select "Manual" setup
    On the Base station tab:  Give Airport Express a name, any name and any password.  Do not select the box:  Allow setup over the internet with Bonjour
    On the wireless tab:  Wireless mode: Participate in a WDS network
    Network name:  the name you gave in the Buffalo router: EG:  WIRENAME
    Radio mode: 802.11n(802.11b/g compatible)
    Channel : the same as you set in the Buffalo
    Wireless security: None
    WDS tab:  WDS mode: WDS remote
    Check: allow wireless clients
    WDS main: the MAC address of the wireless (not LAN) side of the Buffalo router
    Access control tab: MAC address access control: Not enabled
    At the top of the control box , click on the Internet icon
         Internet connection: Connection sharing: Off (Bridge Mode)
         TCP/IP: Configure iPV4 : Using DHCP
         I put in the address of the DNS servers listed on the Buffalo System info page above.
    At the top of the control box Music Icon: I did not enable AirTunes
    Printer icon: did not set this up
    Advanced icon: leave every thing alone
    That is it.  Just do everything as above and your Airport Express will act as a repeater.  (And save yourself a couple of days struggle.)
    Phil

    Many thanks for the info.
    In case you were not aware,the following list of Apple WDS compatible devices has appeared on numerous sites and in numerous Internet links and articles regarding this subject:
    3com OfficeConnect ADSL Wireless 11g Firewall Router model 3crwdr100a-72 but ONLY with NO encryption
    Belkin F5D7230-4 and F5D7231
    BT Voyager 2091 or 2100
    Buffalo WGR-G54
    Linksys WRT54G or WRT54GS (though v4)
    Netgear WGR614 v6

  • How to set up time capsule to transmit in 5Ghz  and wireless router in 2.4ghz

    I have a time capsule connected to my wireless router. After a 2 year use the 2.4 ghz wireless network transmitting from TC seems to have issues. I am trying to configure my TC to transmit in 5ghz and my wireless router (Cisco) in 2.4 ghz, but I cannot find such option
    Thank you in advance

    I do not think there is any option to disable one of the radios on a TC - it is in dual simultaneous mode all the time with no way to alter that.
    Whether or not your Cisco supports that will depend on the specific model - check that models manual or on Cisco's site if you can alter the radios, and if so, how.
    I have a NetGear WNDR4500 (aka n900) and it is pretty simple to do on that - in the web configuration, as admin, you simple check or uncheck the box for each radio in order to turn them on/off.
    P.S. What if you just assign a new SSID to the radio you want off, and simply never set up your devices to connect to it?  That should force them to connect to the other radio (assuming the device supports that frequency itself).

Maybe you are looking for