How to set up the fp2000 sample rate?

I am using the fp2000 in an insutrial project and I would like to know how to set up the sample rate on the FP2000 ,either using a software like Labview or by an hardware method.
Thanks for your help.
Vianney DESPAIGNE

Vianney,
The following links will give you more information on FieldPoint and sampling rates.
http://zone.ni.com/devzone/conceptd.nsf/webmain/2124F6BBD29663D886256CB80054DBD7
http://zone.ni.com/devzone/conceptd.nsf/webmain/A14D3C3314A0E24A86256DBE00664943
http://forums.ni.com/ni/board/message?board.id=110&message.id=455&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=110&message.id=1681&requireLogin=False
Regards,
Aaron

Similar Messages

How do I change the audio sample rate from 48kHz to 44.1kHz for Mpeg2

Hey all,
I've been searching for a while but haven't found any direct answers in the forums or the user manual so here goes.
I have to dispatch a file to Bloomberg TV and the file specs they have given me are as follows:
Video Standard: MPEG-2, MP:ML, 4:2:0
Frame Rate: PAL 25fps
Video Size 720 x 405
Aspect Ratio 16:9
Audio Standard MPEG-1 Layer 2
MPEG-2 Program Stream Mux rate 6mbs per second
Bit Rate Type: CBR
Video Bit Rate 5.7mbs
Audio Bit Rate 192kbs
Audio Sample Rate 44.1Khz
Interlacing: Upper Field first (why they want interlaced for web streaming is beyond me)
GOP Structure: IBBP
I-Frame distance 12
Now everything above is fine except the audio encoding because even though I have set up a new setting from scratch I cant find anywhere to adjust the audio sample rate. The Inspector tells me the Audio encoder is set to:
Format: MPEG
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
Anyone Know how or even if I can change these audio settings? The only adjustments I can find are the filters or the transport/program stream option. I have it set to program as specified by Bloomberg.
Thanks in advance
J

The only setting that I could find in compressor that lets your change the bitrate to 44.1 is when you create a new dolby digital setting and then under the inspectors audio tab/Target System button, change the button to Generic AC-3. When done, you can change the Sample Rate to 44.1.
Hope this helps?

How do i change the audio sample rate in motion 5?

Hello,
here's a simple question. I import 48 Khz audio into the project, but when I go to export the summery says the audios will be exported at 44 Khz. Why is that and how do I export in 48 Khz?
Thanks!
Mike

I'll see if I can muddle through this.
According to the documentation, Motion converts everything internally to 44.1kHz 16-bit. There's no way to change this.
To export in 48kHz, you need to quit Motion. From the Finder > Go > Utilities. Open the Audio MIDI Setup application. For (all) outputs, set the sample rate(s) to 48.000 kHz (and 2 - 24 bit if available [32bit float might work as well]). Quit Audio MIDI Setup and restart Motion.
When you go to export from Motion, be aware that the export Summary will still show 44.1kHz (which is thoroughly annoying!), but the exported video will be the audio rate you set in the Setup app:
The Info from an exported project:
HTH

Logic Sputtering, CPU spiking horribly for no apparent reason, gives MIDI sync error even though the computer is set at the same sample rate.

It's literally making it impossible for me to produce anything, after what seems an arbitrary amount of time in Logic my audio will begin to distort and I will get errors stating that my MIDI sample rates don't match, but they DO and it will spit out some seemingly random sample rate from nowhere. My CPU usage will spike and even my cursor will jitter across the screen until it stops stuttering. The audio problem seems to only be caused by Logic but will sometimes continue to occur in other applications after Logic is closed.
How on earth do I fix this? It's making it impossible for me to work on remixes that I have to have finished soon, I have deadlines and I simply can't work in these conditions... the audio doesn't work.

That sample rate error comes up when Logic gets out of sync internally, you will sometimes also see a MIDI/Audio sync error. MIDI timing is taken from the audio driver/sample rate, it's what enables MIDI to stay in sync with audio, when the audio/MIDI engines get out of whack these are the kind of errors that pop up. (there doesn't have to be any MIDI in the song) Can be caused by bad drivers, interference from another running program, synchronization settings, bad or incompatible plugins!

How can I find out the audio sampling rate of BetacamSP tape?

Hi guys
I'm trying to digitize BetacamSP tape. But I'm afraid if I might choose wrong setting...
This tape is from very long time ago so we don't know which audio sampling rate we recorded with..
How can I find out the audio sampling rate of this BetacamSP tape?
Thanks:)

The sampling rate is set by the Sony DVMCDA2 you are using, when the conversion is made from the analog input to the digital (DV) output. You should be outputting standard DV which is 16bit 48khz audio.
Assuming you are in the US, your Easy Setup for FCP should be DV-NTSC, and then open the Log and Capture Pane and set the Capture Settings Device Control to Non-Controlable Device and you should be good to go.
You will have to roll the deck manually and start and end your capture manually.
You can download a user manual for the DVMCDA2 by clicking here.
MtD

How to change audio capture devices sample rate

I am going to develop a online voice chat applet. Now everything works fine. But I didn't find anyway to capture audio in a lower sample rate. The default sample rate is 441000Hz. I am using MediaLocator to capture audio and pass it into Processor.
MediaLocator ml = new MediaLocator("dsound://");
DataSource ds;
DataSource clone;
try {
ds = javax.media.Manager.createDataSource(locator);
} catch (Exception e) {
return "Couldn't create DataSource"+e.getMessage();

Use GSM format and do it with setting of BitRateControl. It is better than convert the sample rate of your capturing device. I suppose that you try to reduce load of network traffic with changing sample rate, right?
Best regards from Germany,
r.v.

TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I need to set up 12 iPad 3s to train groups of teachers in one-day workshops. Any suggestions as to how to set up the iPads for multiple users?

I have 12 iPad 3s that I want to set up to train multiple groups of teachers on in anticipation of purchasing classroom sets eventually. I am looking for suggestions in how to set up the iPads to be used by multiple users.

Managing Multiple iPads/iPods in a School Setting
http://courses.moodleshare.com/course/view.php?id=162
 Cheers, Tom

How to set up the loop?

I am trying to create a Frame, using BorderLayout and every time we click the center button, it will change the color in one of the region. But I dont know how to set up the loop to make it change one at a time. Below is my draft......Thanks for helping.......
Test.java
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class Test extends Applet implements ActionListener
          Color []color={Color.red,Color.blue,Color.black,Color.green};
          private Button nb=new Button("North Button");
          private Button sb=new Button("South Button");
          private Button eb=new Button("East Button");
          private Button wb=new Button("West Button");
          private Button cb=new Button("Center Button");
          int buttonCount=0;
          public void init()
               setLayout(new BorderLayout());
               add(nb,"North");
               add(sb,"South");
               add(eb,"East");
               add(wb,"West");
               add(cb,"Center");
               cb.addActionListener(this);
               buttonCount=0;
          public void actionPerformed(ActionEvent e)
               for (int i=0;i<color.length;i++)
                    buttonCount++;
                    if (buttonCount%2==0)
                         nb.setBackground(color);
                    if (buttonCount%2==1)
                         sb.setBackground(color[i]);

declare a public variable count;
int count=0;
public void actionPerformed(ActionEvent e)
buttonCount++;
count++;
if(count==color.length)
count=0;
if (buttonCount%2==0)
nb.setBackground(color[count]);
if (buttonCount%2==1)
sb.setBackground(color[count]);
hope you got it.

How to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.

how to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.

Nice of you to point it out here as I at least don’t follow Mr.Nash’s blog regularly.

I have bought the verizon iPad 2 from US and want to use it in India. How to set up the Indian CDMA carrier on my iPad 2

I have bought the verizon iPad 2 from US and want to use it in India. How to set up the Indian CDMA carrier on my iPad 2 ?

rahulmcadit wrote:
The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
Contact ORANGE to unlock it.
See this -> http://support.apple.com/kb/HT5014

How to Set up the variables and others to compile and Run Java Programs

Hello,
I have just downloaded the jdk1.6.0_07 and jre1.6.0_07 and installed it in C:\Program files\Java in my Windows XP ,So please tell me how to sett up the enviroment variables etc to compile and run Java Programs from Command Prompt.
thanks

To set the PATH permanently, add the full path of the jdk1.6.0_<version>\bin directory to the PATH variable. Typically this full path looks something like C:\Program Files\Java\jdk1.6.0_<version>\bin. Set the PATH as follows on Microsoft Windows:
1. Click Start > Control Panel > System on Windows XP or Start > Settings > Control Panel > System on Windows 2000.
2. Click Advanced > Environment Variables.
3. Add the location of bin folder of JDK installation for PATH in User Variables and System Variables. A typical value for PATH is:
C:\Program Files\Java\jdk1.6.0_<version>\bin

Noise on the photo. How to set up the camera?

Noise on the photo. How to set up the camera?
Phone has become worse to do a pictures. A lot of noise on the photo. Often photo obtained not clear, smeared. I've heard that i can configure through iTunes. But I do not know how?? Or tell me another way to set up and adjust the camera.
All updates are installed.
I have the iPhone 5 (Just 5)

OS X was designed long before the advent of SSD and the built in assumption is that everything would exist on the boot drive. If you want to change that, you'll need to do it manually. If I had an iMac with an SSD (a MBA has become my main computer) I'd leave the OS and applications on it and move at least some of my files to the standard hard drive - certainly all the media (music and video).
The techs I work with have been arguing (politely) about the benefits of their own setups. One moved the entire User's directory to the standard drive. Copy your files by dragging, open Groups & Users in the System Preferences, option click on each account name and then point to the new location of the user's directory. Test that it works before deleting the directory from the SSD.
The other kept his Users directory on the SSD but moved everything but the Library folder, then he put aliases of the folders into his user directory and dragged new folders into the Finder window sidebar. His argument is that many programs keep a hefty number of files in the Application Support folder and keeping them on the SSD lets the program start faster. Since I've not done any testing I can't say yes or no.

How to set/get the archive file attribute?

I am programing a (freeware!) ftp client and need to know, how to set/get the archive attribute of a local file. I was searching through whole the i-net - nothing at all!
please help me!!

Hi,
Since not all operating systems support the archive attribute, this ain't included in the JDK.
If you're using Microsoft Foundation Classes for Java, then you can use File.getAttributes(String path) and check whether the result equals FileAttribute.ARCHIVE.
For setting the attribute, you can use
File.setAttributes(String path, FileAttribute.ARCHIVE)
Of course this is all Microsoft-specific stuff.
Hope this helps,
Kurt.

How to set up the output device in output determinatin with customer master

Hi,
I am doing the output determination using customer master and not conditions technique. Can anybody please let me know how to set up the output device . I have done the following:
1) assigned output determination procedure DB00001 to acct group 0001
2) added output type BA00 to customer master documents tab with print as the medium.
3) On creating a sales order and changing it its giving the message
BA00 515 No printer defined for output BA00
Please provide me with some suggestions , how to resolve this issue.
thanx
Jayant

1. tcode V/30 -> check BA00 type -> goto "print" tab -> what's set in the "print param." field?
2. IMG ->SD -> basic functions -> output control -> define print parameters -> V1 output -> for BA00 output type -> Assign a default printer. This is related with the "print param." set in step 1.
For example: if "print parame." is set to '1' in V/30, then the default printer is assigned to sales organization.
You can check F4 search help on the "print param." field (in V/30) to see what options you have.
If you want to specify printer by customer account, you may need to use userexit.
Edited by: Harry Wu on Jun 23, 2010 9:18 AM

How to set up the fp2000 sample rate?

Similar Messages

Maybe you are looking for