How to set up the N97 for retrieving my lotus note...

I'm new at this and may have missed the information in an existing discussion but I couldn't find a solution to my problem.  I have set up my home email but I am not sure how to set up the work email and calendar which is Lotus Notes.  I've tried using mail for exchange, email and email sync. It has been suggested that I forward the work email to another address (which is what I had to do for my home email to work) but I would think that if I did this, I wouldn't be able to retrieve lotus notes calendar information.  Does anyone else use their N97 to retrieve Lotus Notes emails and calendar information from their work?

Run Safari and open the Preferences, in the General Tab is a field to set your Home Page

Similar Messages

  • I need to set up 12 iPad 3s to train groups of teachers in one-day workshops.  Any suggestions as to how to set up the iPads for multiple users?

    I have 12 iPad 3s that I want to set up to train multiple groups of teachers on in anticipation of purchasing classroom sets eventually.  I am looking for suggestions in how to set up the iPads to be used by multiple users.

    Managing Multiple iPads/iPods in a School Setting
    http://courses.moodleshare.com/course/view.php?id=162
     Cheers, Tom

  • How to set up the path for report in 10gAS?

    I have a report which can be run in one folder A but not in the other folder B, both folder are included in the forms_path in default.env of AS. How can I set up the path for the report in AS so that the report server knows to look for the report in the folder B?

    Hello,
    If you don't specify the "full path name" for your reports, the file will be searched in the directories listed in REPORTS_PATH or in the directory specified in the property sourceDir
    For more details :
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/envvars/envvar_reports_path.htm
    and
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm
    Regards

  • How to set up the path for Report Server's output

    I've had 9iAS on NT 4 platform with Service Pack 6.
    By default, the Report Server's output goes to the
    C:\Oracle\806\Bin
    How can we change this setting ?
    (in 6iserver.conf we don't have a variable for it.)
    I'll appreciate any help.
    Thanks.
    Izabella.

    Thanks for reply.
    In my \Report60\Server\myrepsvr.ora I have :
    cachedir="E:\Oracle\806\REPORT60\server\cache"
    but when I call :
    http://<host>:<port>/dev60cgi/Rwcgi60.exe?
    report=myrep.rdf&destype=file&desformat=pdf
    &paramform=no
    the created pdf report doesn't go to the specified cashedir, but goes to the
    C:\Oracle\806\Bin
    How can I handle it ?
    I'd like to see the pdf file in the cachedir,
    not in Bin.
    Izabella.

  • How to set up automatic payment for the purchase order

    Hi, All,
    I have one question how to set up automatically payment for the Rent Office purchase Order?
    There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
    Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
    Thanks in advance

    Either you can set up ERS or you can pay directly from the FI side.
    Prerequisites
    Evaluated receipt settlement must be flagged in the purchase order item.
    The vendor must be flagged as being subject to ERS in the vendor master record.
    The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    A tax code must have been maintained in the purchase order item.
    The order price of the materials may not be an estimated price.
    If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
    In Purchasing, you can delete the default ERS indicator in a purchase order item.
    Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
    The selection screen appears.
    You can use the following criteria to narrow down selection of the transactions to be settled:
    Company code
    Plant
    Goods receipt posting date
    Goods receipt document
    Fiscal year of the goods receipt
    Vendor
    Purchase order and order item
    You can define the selection criteria for the invoice documents by:
    Delivery
    Purchase order
    Purchase order item
    Goods receipt document
    Credit memo
    Invoice
    Currency
    Choose  Execute.
    The system issues a log for Evaluated Receipt Settlement, which displays the following:
    Settled
    In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
    Could not be settled
    In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
    If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
    Select the item and choose Exclude from ERS.
    The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
    You can display the following environment information for the order items selected. To do this, choose Goto ®:
    Display purchase order
    Display invoice
    Display material document
    Display long text

  • HT1424 how do i set up the vpn for the ios

    how do i set up vpn for the ipad2

    Answered here: how do i set up the vpn for the ios

  • How do you set up the alert for FaceTime with sound

    How do you set up the alert for FaceTime with sound?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • How to set custmer master block for posting & how to set the status .....

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate subject in your message thread. >
    Hi ...
    How to set custmer master blocked for posting & how to set the status has deleted. please provide the steps for the above two actions.
    thanks

    Hi,
    U can use T-code FD05 for Blocking the customer and
    T-code FD06 in order to set for deletion,
    Assign Points if useful,
    Regards,

  • HT3743 HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

    HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

    If you don't have a SIM card in the phone, you must put one in. It's required for activation.
    If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone.

  • How to set up the "incoming Mail server" for google apss account

    how to set up the "incoming Mail server" for google apss account

    The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server.  You'll have to ask them about it.

  • I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it?

    I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it to accept.
    Thanks.

    Hey Lori,
    You can set or change the password for an Apple ID by following the steps in this article -
    Apple ID: Changing your password - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

    Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

    This message refers to the VIs found at this link:
    http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
    How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

    Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • How to set  up the loop?

    I am trying to create a Frame, using BorderLayout and every time we click the center button, it will change the color in one of the region. But I dont know how to set up the loop to make it change one at a time. Below is my draft......Thanks for helping.......
    Test.java
    import java.applet.*;
    import java.awt.*;
    import java.awt.event.*;
    public class Test extends Applet implements ActionListener
              Color []color={Color.red,Color.blue,Color.black,Color.green};
              private Button nb=new Button("North Button");
              private Button sb=new Button("South Button");
              private Button eb=new Button("East Button");
              private Button wb=new Button("West Button");
              private Button cb=new Button("Center Button");
              int buttonCount=0;
              public void init()
                   setLayout(new BorderLayout());
                   add(nb,"North");
                   add(sb,"South");
                   add(eb,"East");
                   add(wb,"West");
                   add(cb,"Center");
                   cb.addActionListener(this);
                   buttonCount=0;
              public void actionPerformed(ActionEvent e)
                   for (int i=0;i<color.length;i++)
                        buttonCount++;
                        if (buttonCount%2==0)
                             nb.setBackground(color);
                        if (buttonCount%2==1)
                             sb.setBackground(color[i]);

    declare a public variable count;
    int count=0;
    public void actionPerformed(ActionEvent e)
    buttonCount++;
    count++;
    if(count==color.length)
    count=0;
    if (buttonCount%2==0)
    nb.setBackground(color[count]);
    if (buttonCount%2==1)
    sb.setBackground(color[count]);
    hope you got it.

Maybe you are looking for