How to set up the number of tabs restored at once after a reboot?

I usually have opened one or two windows with a total of 15-20 tabs at once. When I restart Firefox, it loads the tabs in the background, but only three at a time. It can get a while to load all of them, and it is sluggy while loading. I have a four core processor and lots of RAM, so I wouldn't mind to trade processor time and/or RAM for speed. Also, I don't mind wandering in about:config or installing a new add-on. How can I set up Firefox so it loads more (about 8-10) tabs at once while restoring a session?

Why that change? Why deprecate a setting that only power users who knew what they were doing changed, and that can do good in the right hands? Is there any hope that this setting (or a similar one) will get enabled in a future release?
Lately, I'm having a feeling that Mozilla no longer thinks about its power users, the ones that will evangelize more, and makes breaking changes without worrying about them. The ones that are fleeing to the other open source browser. Maybe it's time for me to think about switching, too. Sadly...

Similar Messages

How do I reset the number of activations on Visio 2003 after getting a "too many activations" message?

I just installed Visio 2003 on a PC, and got the "we can't activate this app via the internet because you've installed it too many times" message. I went back to phone activation, but, of course, that's no longer available for this product.
How do I get the number of activations reset? Apparently you used to be able to do this by calling Microsoft, but what's the number to call? Or is there another way to do it?
I'm probably going to need to do it for my copy of Office 2003 also.

Hi,
Microsoft has ended support for Office 2003 on April 8, 2014. This change will affect your software updates and security options.
Please contact your local customer service. Explain to the service (Human being) that you can’t activate Visio 2003 and the error message is “we can't
activate this app via the internet because you've installed it too many times”.
You can find
your local custom support number on the link below.http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Hope it can be helpful.

How to setting for the number range for Business Partner

Dear Sir,
I create the new role for Business Parnter , However, I would like to set the new number range for that buiness Partner with that role.
Please kindly advise what is the step to do.
Thank you and best regards,
Vimol

Hi Vimol,
In CRM standard system it is not possible to link specific role with specific grouping.
To achive the same go to following IMG path:
SAP Implementation Guide>Cross-Application Components>SAP Business Partner>Business Partner>Basic Settings>Number Ranges and Groupings>
Define Groupings and Assign Number Ranges
Hope you selected the opton button for column 'Int Std.
I already suggested a work around above.
Best Regards,
Satish Mathala

HOW DO I USE THE BACKUP DISKS TO RESTORE MY SETTINGS AFTER A HAED DRIVE CRASH?

I RECENTLY HAD TO SET MY COMPUTER TO THE FACTORY SETTINGS AFTER A SYSTEM RECOVERY. HOWEVER
BEFORE DOING THIS I BURNED 7 BACKUP DISKS TO SAVE MY SETTINGS. NOE HOW DO I USE THESE DISKS
TO RESTORE MY ORIGINAL SETTINGS?

Hi
Put in your first recovery disc, then go into your BIOS and set the your cd/dvd drive as the first boot device, exit saving settings, your computer should restart and boot off your recovery disc.

How can i limit the number of taps that open in safari

How can i limit the number of tabs that open in safari

preferences-->tabs
change new pages to never open in new tabs.
Now you only get the number of tabs that you open yourself with command-T or the new tab button.

How to Count the number of TAB chars value '0A' in a line?

I have a requirement to count the number of TABs in a text file that I am processing (they must equal 75) to ensure that all the fields have been submitted on the file I am reading?
How do I identify the TABs in a line?
I have this so far:
         CONCATENATE gv_unix_file gv_lstfiles-name INTO gv_unix_file.
          OPEN DATASET gv_unix_file for INPUT IN TEXT MODE ENCODING NON-UNICODE.
          IF sy-subrc <> 0 .
            message e000(zz) with 'Cannot access in_uk files'.
          ENDIF.
          CONCATENATE gv_unix_file_arc gv_lstfiles-name INTO gv_unix_file_arc.
          OPEN DATASET gv_unix_file_arc FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE.
          IF sy-subrc <> 0 .
            message e000(zz) with 'Cannot access in_uk files'.
          ENDIF.
          DO.
            READ DATASET gv_unix_file into lv_str.
            IF sy-subrc <> 0.
              exit. "exit do loop, file is done.
            else.
              TRANSFER lv_str to gv_unix_file_arc.
            ENDIF.
          ENDDO.

Here is a sample code:
DATA: lv_string TYPE string,
      lv_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
      lv_i TYPE i.
DATA: result_tab TYPE match_result_tab.
DO 3 TIMES.
CONCATENATE 'A' lv_string INTO lv_string SEPARATED BY lv_tab.
ENDDO.
" this is how you need to find how many tabs are in your transfer work area...
FIND ALL OCCURRENCES OF lv_tab IN lv_string RESULTS result_tab.
DESCRIBE TABLE result_tab LINES lv_i.
WRITE:'No. of tabs found:', lv_i.

How to limit the number of tabs in the tabs bar

I would like to know if it is possible to limit the number of tabs that can be in the tabs bar. The reason is to reduce bandwidth use by any single user on my home network.
Is there a way to set a max limit (under 10) in FF?
If not is there an add-in that is capable of this task?
Also can FF be set to only open one copy of the program at a time?

Try this extension:
*Window and Tab Limiter: https://addons.mozilla.org/firefox/addon/9129/

How do I limit the number of emails that show in my active mailbox? There was a way in Settings on ios 6, but i can't find it in ios 7.

How do I limit the number of emails that show in my active mailbox? There was a way in Settings on ios 6, but i can't find it in ios 7.

You need to delete your current hotmail account set up on your iphone.
Once this has done click 'Add Account' and select the new 'outlook.com' tab.
Set up your hotmail account again from scratch and this will then allow you to select how many weeks/months of emails you sync to your phone.
Im not sure if anyone else had a similar problem to me prior to iOS 7, but if i deleted an email from my hotmail account on my iphone - it wouldnt sync with my actual hotmail account. So when i logged in online all the emails I had deleted on my phone would still be showing as unread.
But by setting the account up as above, they now sync perfectly.
Well for me anyway

How do I change the number formatting within a Cell Table in Microsoft Word?

Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements.
I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
aligns by the decimal point and use the $ signs and () for negative numbers. We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
the text if it were to be typed in Excel. We have also tried creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue. The only option is to use tables within Word but how do we change
the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?
If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
Thank you very much for your help!!!!!

Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
Option 1:
- Select the cells for which you want to do this.
- Display the ruler.
- Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
- Click in the ruler where you want the decimal tab.
Option 2:
- Select the cells for which you want to do this.
- Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
- Click the Tabs... button in the lower left corner of the dialog.
- Specify a tab position in the box, e.g. 1.5".
- Select the 'Decimal' radio button under 'Alignment'.
- Click Set.
- Click OK.
You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
Regards, Hans Vogelaar

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.

StevieJ wrote:
I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.
Check Mail Preferences, Accounts tab. Select the account, then the Mailbox Behaviors tab. See if you have it set to Permanently erase deleted messages when: One week old. (or less)

How do i limit the number of simultaneous downloads to my ipod touch?

I just purchased a new ipod touch and want to dump my entire icloud library onto it. I figured the easiest way to do this would be to make a smart playlist that includes all my music and then just download the whole playlist (thousands of songs). The problem is, at about 2/3 of the way through a track, the ipod touch automatically starts downloading the next track. At this point, it's trying to download about 50 tracks simultaneously and as a result is taking abotu 5 minutes to download one song. How can I limit the number of simultaneous downloads? Is there a faster way to load up a new ipod touch with your icloud library? Thanks.

Thank you for the reply. I had no idea I had so much access to Firefox prefs.
It's still a strange design though. Yep, the original setting was set to 30 simultaneous downloads. I set it to four, which would see to make my Mac more usable as four downloads are rolling while all the rest are in queue.
Only probably is, Firefox doesn't just think of what is in the download list as a "download". Once all four downloads are rolling, no more webpages will open! (Strangely, sometimes they will, but very slowly ... but usually not at all.)
Apparently, even a browser tab is a "download" and is stopped once the assigned number of simultaneous downloads is reached.
So I'm still back to not being able to limit my downloads for the benefit of having good use of my browser while downloads are coming in.
Right now, one pages where I have boo-koo downloads I want to initiate at one time, I'm clicking "download", starting the download, going to the downloads list, pausing it, getting another download, pausing it, and so on until I have a complete queue ready to go. Then I start the downloads once I know that I no longer need the internet.
That seems sort of for the birds, doesn't it?
Does anyone have any suggestions? Other specialized download programs get the concept of an active queue and a paused queue with a number-setting to determine the max downloads. Why doesn't Firefox get this? Or does it and have I just still not found it?

My iPad has connect to the wrong number for imessage and facetime. How do I change the number on my iPad for imessage and faceting?

When setting up my new iPad and entering my own Apple ID my sisters number appeared on the imessage and facetiming; however her number is not associated with my Apple ID. How do I change the number to my own?

Turn iMessage and FaceTime off, reset the device by holding both buttons until the apple logo appear then let go and wait for it to restart. Then turn iMessage and FaceTime back on and enter the settings again

How can I limit the number of emails retained on my ipad air?

How can I limit the number of emails that are retained on my iPad Air? Because of legal requirements of a long-term project, I cannot permanently delete emails relating to that project from my ISP's mail server. My gmail account contains over 17,000 emails and, upon setting up my new iPad, and updating to ios 7.1.1, I now have all 17,000+ emails taking up space. I would like to limit the emails by count as I was able to do on my old iPad running ios 5.1.1 OR to retain them based on date range. I have not found any instructions on the support discussions or general iPad blogs that allow me to do that. Any way around this problem?
I also miss the 5.1.1 mail search feature that allowed me to narrow the search by from/to/subject/all. Does anyone know if that feature is available using some little-known ios 7.1.1 feature?
Thanks for your help.

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.

How do I count the number of records returned in the CMIS query

How do I count the number of records returned in the query CMIS?
SELECT COUNT(*) FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = \'RD_PROJETOS_EXCLUSIVOS\''}
Euler Homero

Hi Euler,
interestingly enough, the reference guide for CMIS ( http://wiki.alfresco.com/wiki/CMIS_Query_Language ) that I found does not mention the COUNT function at all. On the other hand it states that: "The SELECT clause identifies which virtual columns to return in the result set. It can be either a comma-separated list of one or more queryNames of properties that are defined by queryable object types or * for all virtual columns."
There are, however, some other posts like e.g. http://alfrescoshare.wordpress.com/2010/01/20/count-the-total-number-of-documents-in-alfresco-using-sql/ which state that they could make it working.
Having asked in the WebCenter Portal forum, I assume that your content repository is WebCenter Content. The CMIS doc for the Content is available here: http://docs.oracle.com/cd/E23943_01/doc.1111/e15813.pdf (no COUNT there either). It does, however, mention explicitly that "CMIS queries return a Result Set where each Entry object will contain only the properties that were specified in the query.". This means your could rather investigate the Result Set. Note that there are also other means than CMIS how to get the requested result set (e.g. calling a search service directly via so-called RIDC).
In the given context I am also interested what your use case is. OOTB CMIS in WebCenter Portal is used, for instance, in Content Presenter, where it is content rather than "parameters" what's displayed.

How to set up the number of tabs restored at once after a reboot?

Similar Messages

Maybe you are looking for