How to Set Up the Wireless Rounter for IM

Yesterday I bought a wireless rounter. It's from Linksys. The model no. is "WRT54G". After I set it up, the Internet worked just fine, but I couldn't log on the Microsoft messenger at all. What should I do? This frustated me a lot. I don't know where the problem is. Is it from rounter or the Internet provider, which uses DSL connection?
12 iBook G4   Mac OS X (10.4.2)  

Was MSN working before you set up the router? I don't see why it would be the router. I've never seen problems. Do you have a firewall turned on?

Similar Messages

  • How to Set Up the Wireless Rounter

    Yesterday I bought a wireless rounter. It's from Linksys. The model no. is "WRT54G". After I set it up, the Internet worked just fine, but I couldn't log on the Microsoft messenger at all. What should I do? This frustated me a lot. I don't know where the problem is. Is it from rounter or the Internet provider, which uses DSL connection?
    12 iBook G4   Mac OS X (10.4.2)  

    hi Golf,
    If you go to System Preferences > Sharing > Firewall tab and use the New Button and then select MSN in the drop at the top (you are not likely to neeed to actually Apply this) you will see the ports for MSN.
    These ports are above the 1024 threshold that many routing devices have preset in them.
    Type 192.168.1.1 into a web browser.
    The default User Name is admin as is the Password.
    You then need to select Applications and Games
    In here you can set Port Forwarding on one line.
    Start port 6891
    End Port 6900
    Select TCP in the next option
    Enter your IP for your computer.
    And Save
    The alternative is to go to Adminstration instead and Turn on UPnP
    Ralph

  • Does anyone know how to set up the wireless router when y...

    does anyone know how to set up the wireless router when you have a Vonage modem and a cable modem?  HELP!

    You mean u got 2 modems ?
    C | EH
    linksyshelp.blogspot.com

  • How to set up the communication channel for third party idoc

    Hello,
    I am trying to send an idoc from an sap 4.6c system to an third party system. The third party system is supporting idcos with trfc.
    My problem is to set up the communication channel in the integration builder (configuration) for the third party system. The idoc is waitung in XI to transport.
    My settings are:
    adapter type: idoc
    transport protocol: idoc
    message protocol: idoc
    adapter engine: integration engine
    rfc destination: xyz (is working fine)
    interface version: sap release 4.0 or higher
    port: ??
    sap release 46c
    My problem is the port. should i set up a port in idx1? But the third party is not an sap system and so i dont have a client.
    On the xi i have defined a port in transaction we21 (transactional rfc) for the third party with my rfc destination xyz. But if i enter that port in communication channel i got error messages.
    Thanks for any help.

    Hi Christian,
    yes, you have to mainztain that port in idx1.
    First ypi load the rfc-metadata from an SAP referenzsystem and afterwards copy this metadata to the third party port.
    For further details check the onlinedocumentation "IDoc Processing with the IDoc Adapter" XI -> runtime -> adapter
    Good luck,
    Holger

  • How to set-up a wireless system for Mac and Windows?

    In a few weeks I will visit my brother in Tennessee, USA who has a cable modem (very good speed - "Comcast") connected to one desktop PC (Windows XP I believe).
    I want to spend 2-3 weeks at his home using my MacBook core duo (May 2006 version) via wireless-- and what is the BEST way to install a wireless internet access for my brother that I can use for the 3 week visit? NOTE: After I leave, this has to work for him wireless with his PC's - not Macintoshes. But I want to have the flexibility to be in several rooms of his long (but single story) home during my stay.
    Can I use an AirPort Extreme Base Station "n" and if so, will my MacBook work with this at maximum download / upload speed (i.e. equivalent to the cable) - and will my brother's PC's also be able to connect? Or is there another Airport base station?
    OR-- should I head down to "Generic Computer Store" and just by a wireless router (WiFi)(think that's what they call them) and connect this to his cable modem? IF SO WILL THAT WORK FOR MY MAC?
    Thanks for any comments or references here -
    Regards,
    Steve

    Can I use an AirPort Extreme Base Station "n"
    Yes.
    and if so, will my MacBook work with this at maximum download / upload speed (i.e. equivalent to the cable)
    The speed of your internal network generally is much much faster than the speed of your internet connection. Unless he has an internet connection faster than approx 6Mbps then even dropping down to the old 802.11b Airport would not seen any decrease in speed of downloads etc...
    and will my brother's PC's also be able to connect?
    If his PC is 802.11b/g-compliant, it shouldn't have any problems connecting to the AirPort base station.
    Or is there another Airport base station?
    The other AirPorts would work, but the AirPort Express & older 802.11g AirPort Extreme base stations have a max. range of 150 feet.
    OR-- should I head down to "Generic Computer Store" and just by a wireless router (WiFi)(think that's what they call them) and connect this to his cable modem? IF SO WILL THAT WORK FOR MY MAC?
    That is always an option as well, especially since he will be the primary user throughout the year. I'd suggest going with a brand name, like Belkin, D-Link, or Linksys for the wireless router choice.

  • How to set up the inspection plan for the material in super BOM

    Hello,
    how to get the accurate inspection plan of the IQC for the material which was class item in a super BOM?
    I've gotten the characteristic value from the sales order, and get the PO after MPR. The problem is how to specify the target value and the range of inspection characteristic in inspection plan, because the value is temporary?
    Thanks!
    Lin

    Hello,
    I think you need to create MIC which linked with the configuration characteristic, and specify "inspection by configuration" for the inspection type.
    then the configuration value in the sales order can be transfered to the inspection lot when production released or goods receipts if you use inspection type 03 or 04. that means the value range for the MIC will be determined dynamically for each sales order.
    Regards, Winnie

  • How do i set up the wireless option for printing rather than using an usb

    how do I set up wireless printing function on my hp photosmart C4780

    This should help: http://www.hp.com/global/us/en/wireless/reconfigur​ing-system-help2.html
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • NI9203 - Need to know how to set up the FPGA code for multiple NI9203 modules and how to calibrate the data

    Hi. I'm using the NI9203 module to detect pressure, temerature and flow rate of water in a cooling system. I have 17 different inputs coming in therefore i'm using 3 NI9203 modules. I've used the example provided with labview as a base for designing my code. The example can be found here : Program Files\National Instruments\LabVIEW 8.0\examples\CompactRIO\Module Specific\NI 9203.
    I've had no problems when testing this code out for a single NI9203 module but when i add code for 3 modules the code will not compile as my resources are over mapped. Is there a simpler way to program the FPGA code.
    That said how do you go about calibrating the data that's received from the module. Preferably i'd like to write a vi to do the calibrating. Just need help on how to go about writing this vi

    Hi havok,
    Firstly, I would use constants to configure the modules, it'll save some resources on the FPGA.  I'm not typically changing the settings on the fly, so using constants whenever possible helps.  I would also take a look at the following KnowledgeBase article on other changes you can make to the FPGA VI to compile the code:
    http://digital.ni.com/public.nsf/allkb/311C18E2D635FA338625714700664816?OpenDocument
    The best changes you can make are to use fewer arrays and front panel elements.  This can be done by using a DMA FIFO or constants on the block diagram. 
    Now actually calibrating the data will require you to do it on the host side.  There is an example VI called Binary to Nominal that changes the raw data to something more useful for datalogging, display, etc.  It can be found in some of the example VIs, or in the following link:
    http://digital.ni.com/public.nsf/allkb/E86D8D460C4C092F8625752F00050A61?OpenDocument 

  • How to set up the digital signature for xi server

    dear all,
    these days i need to implement a interface using the digital signature technology to enable it's security transition.
    we are going to use the digest sign with partner.
    Could anyone of you tell me the detailed steps concerning the seting up at xi server for this pupose ?
    Thanks a lot !

    This is a really urgent request,
    does anyone have the experience on this, please give me some hints ,thanks !!
    BR
    ZhouHui

  • How to set up the internal camara to chat

    how to set up the internal camara for video chating

    click on FaceTime and follow the instructions on screen.  If you want to video chat with non Mac users, you might try Skype.

  • I need to set up 12 iPad 3s to train groups of teachers in one-day workshops.  Any suggestions as to how to set up the iPads for multiple users?

    I have 12 iPad 3s that I want to set up to train multiple groups of teachers on in anticipation of purchasing classroom sets eventually.  I am looking for suggestions in how to set up the iPads to be used by multiple users.

    Managing Multiple iPads/iPods in a School Setting
    http://courses.moodleshare.com/course/view.php?id=162
     Cheers, Tom

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • How to switch off the Wireless Transmitting of the xDock for the iPod?

    Hey,
    Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
    Thanks for your help. ;-)
    Hi,
    Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
    Vielen Dank im Vorraus f?r eure Hilfe ;-)

    turn it into standby mode
    unplug the power supply from the x-fi dock
    press the volume controller and hold it while plugging the power supply
    the link control led on the backside will glow shortly and and turn off
    thats it
    to reactivate it press both the forward and backward wind button for at least 3 seconds
    But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

  • How do I set up the port interface for the WAN side of my RVS4000 to 100T Full Duplex?

    How do I set up the port interface for the WAN side of my RVS4000? The ISP says I need to set it to 100T Full Duplex, but where would I do that? In the Router's administration GUI I can't find any options to make such settings for the WAN side.

    The setup of the folders in Finder is entirely up to you. Whatever suits your needs is what you should do. Lightroom will be fine no matter how you set it up.
    So I'm not really sure what your question is.

  • TS2220 How do you reset the network password for Airport wireless?

    How do you reset the network password for Airport wireless?

    Use AirPort Utility...select the AirPort Express and in the menu select Base Station...Restore Default Settings...

Maybe you are looking for

  • Implementing menu items and saving state in my app

    Hello I'm a new user to the forums, but have a little bit of java programming experience. currently i'm writing some business applications, one of which is a payroll system. The target audience is end-user bookkeepers so i am planning for a GUI front

  • Oo alv tree in background

    can we schedule a oo alvtree report in background. if cl_gui_alv_grid=>offline( ) is initial. CREATE OBJECT g_container_object "cl_gui_docking_container EXPORTING repid = gv_repid dynnr = '100' extension = '1500' EXCEPTIONS cntl_error = 1 cntl_system

  • Data Pump and Grants - Frustration

    Hello All, I've been working on this for days, and I think I've finally got to the point where I can ask a meaningful question: My task is to copy the meta-data from 6 important schemas in a PROD db to equivalent schemas in a DEV db. Now these schema

  • Examples for webdynpro tabstrip

    can anyone point me to  examples for webdynpro tabstrip.. Regards Anuj

  • Re: Broadband Light off (no connection)

    Hi, This morning I noticed that I no longer have broadband. I have a blue power light and a blue wireless light, but have no broadband or phone lights. I have checked all connections, tried a new filter, removed all other items and just have the Home