How to set up Time Capsule as an additional network

I have the 1 TB Time Capsule and I set it up as "creating a wireless network". It is connected via Ethernet to my linksys router. How do I set it up so that I have two wi-fi networks running? Options are a) join a wireless network b) connect to a network using Ethernet to extend the network or create a second network.

When you say faster speed, are you taking about using the 802.11n 5GHz protocols?
If that is the case, then you arrange for the TimeCapsule to join the existing network, and configure it to "Bridge" the ethernet to WiFi.
My assumption is that the other WiFi is 802.11g, so leave that one alone.
Back on the TimeCapsule, you configure it so it using 5GHz frequences ONLY.
You configure TC so it has its own SSID (network name).
Now Macs (or other systems) that are 802.11n WiFi capable can connect to the TC network name (SSID), and your older 802.11g devices can use the other WiFi base station.
If the TimeCapsule is a dual radio system, then you can configure the 2.4GHz radio so that it uses the same SSID and password as your existing WiFi base station, only have it use a different channel (you do not what the original and the TC 802.11g radio fighting over the same channel. Channels 1, 6, and 11 are best, but if you have conflicts with neighbors, try for something that doesn't conflict and is 5 or more channels away from your other 802.11g base station.

Similar Messages

  • How to set up time capsule with BT Infinity

    how to set up time capsule with BT Infinity

    The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
    Method is,
    1. Plug the TC WAN port into the BT supplied modem by ethernet.
    2. Plug the computer you are using for the setup into the TC by ethernet.
    3. Run the airport utility .. go to internet tab on the top menu..
    In the bottom option, Connection Sharing choose off (bridged mode)
    4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
    5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
    6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
    This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
    If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

  • How to set up time capsule with att uverse

    So I'm thinking about getting a time capsule for my home network. I have several apple (Macbook pro, Ipad, Iphone) products and i think it would be convennient to have. The only problem I think I will be facing is seting up the time capsule along side with my Att uverse 2wire router. So i have several questions:
    1) I have wireless receivers for my tvs that receive the signals from the main uverse 2wire modem/router. Now I read online that you can turn of the wireless router function of the main 2wire modem/router and just turn it in to a modem (from what I understood at least). So my question is if I turn of the wirless function of the main uverse 2wire router, will that affect me watching tv with the wireless recivers that uverse provided me???
    2) I know I can probably go around the issue on question 1 by putting the time capsule in to bridge mode, but will I loose any functions on the time capsule by doing so? Will accessing the hard drive be possible if its on bridge mode?.
    3) If getting a time capsule is not worth it bacause there is no way around the issues in the first two questions then is there another product that I can use that might be better for my situation?
    Im no IT genius but I know my way around so I am comfertable trying to set it up I just need some guidence. Any help will be greatly appreciated it!!

    So my question is if I turn of the wirless function of the main uverse 2wire router, will that affect me watching tv with the wireless recivers that uverse provided me???
    The other receivers will not work if you turn off the wireless on the Uverse gateway.
    I know I can probably go around the issue on question 1 by putting the time capsule in to bridge mode, but will I loose any functions on the time capsule by doing so?
    The Time Capsule will need to connect to the Uverse gateway using an Etherent cable. The Time Capsule will be able to provide another wireless network when it is set up this way, but it will not be able to provide an additional Guest Network.
    Will accessing the hard drive be possible if its on bridge mode?.
    Yes
    If getting a time capsule is not worth it bacause there is no way around the issues in the first two questions then is there another product that I can use that might be better for my situation?
    This really depends on how many Macs that you need to back up. The Time Capsule can back up multiple Macs on a network. If you don't need that type of capability, then it would be much simpler, and a lot less expensive to connect a hard drive directly to your Mac and back up the Mac that way.
    Half of the cost of the Time Capsule is tied up in a wireless router, so if you don't plan to use the wireless on the Time Capsule, you will be paying for features that you do not use.

  • How to set up time capsule with BT home hub 4.0 & Openreach

    Idiots guide needed.
    My TimeCapsule (year old model) had been running well from my BT Openreach box (without using the Home Hub 4.0) but recently had issues with connection dropping - BT said they've sorted out their end and can't see any remaining issues and can't offer me any more support if I'm not using the Home Hub 4.0
    I reset the TC to run straight from the Openreach Box  still have issues with wi-fi dropping in and out (both on ethernet and wi-fi).
    Can I:....
    1)     set up Time Capsule running from BT Home Hub 4.0 which itself runs from BT Openreach white box (thus continuing to get support from BT)
    or should i go back to
    2)      Time Capsule running straight from BT Openreach Box
    Can some one post an idiots guide to either option?
    Other stuff that may be important.
    Macbook air running Yosemite (mid 2011 model)
    Apple TV
    Airportexpress
    Time Capsule
    2 x iphone 4s
    Kids PC
    Ethernet and wifi for above - I generally run everything hard wired via ethernet.

    The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
    Method is,
    1. Plug the TC WAN port into the BT supplied modem by ethernet.
    2. Plug the computer you are using for the setup into the TC by ethernet.
    3. Run the airport utility .. go to internet tab on the top menu..
    In the bottom option, Connection Sharing choose off (bridged mode)
    4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
    5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
    6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
    This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
    If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

  • HOW TO SET UP time capsule with time machine?

    I have not been successful in setting up time capsule with the time machine,can someone give me steps to follow?

    What part are you having problems with?  You need to make sure File Sharing is enabled on the Time Capsule (which is done in AirPort Utility).  Then you just connect to the Time Capsule either wirelessly or via ethernet cable and when you go to Time Machine setup your computer should recognize your Time Capsule as a valid storage for Time Machine backups.

  • How to Set Up Time Capsule With Airport Extreme and Airport Express

    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

    evelK wrote:
    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
    I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

  • How to set up time capsule with router

    I have a router N 300 and would like to buy time capsule but I did not find any information how to set up bouth devises. Thanks

    You can always bridge the Time Capsule.. it is easy. Once bridged the time capsule will no longer route. All routing is then handled by the original router.. N300 (which could be belkin or netgear and maybe other people call then N300). It will still work as a wireless access point.. unless you turn it off, a switch with WAN now allocated to LAN, and a network drive.
    Just look up bridge.
    But there are other ways to do things. You could replace the N300, unless it is a modem.. in which case you can bridge that and use pppoe client on the TC (if you ISP does pppoe).

  • How to set up time capsule with ethernet?

    How do I set up a Time Capsule using just ethernet? I have to do a complete backup (1 TB) (AGAIN!) and it will take forever using WIFI. And the instruction manual even says that the first complete backup should be done using just ethernet, --but you know what, it does NOT say how in the world to do that.
    I thought I had stumbled into a few minutes ago, as I had turned off the WIFI and just had it connected to my MacPro just using an ethernet cable, and yet Time Machine was able to find it and start backing up to it ... but that shut off my internet connection! I couldn't log into this site or any other site until I pulled the power plug on the Time Capsule.
    I have FIOS internet connected to my ethernet 2 plug and the Time Capsule connected to my ethernet 1 plug -- would it help if I reversed them?
    This thing is seriously fouled up. Should have just bought a Firewire hard drive.

    I thought I had stumbled into a few minutes ago, as I had turned off the WIFI and just had it connected to my MacPro just using an ethernet cable, and yet Time Machine was able to find it and start backing up to it ... but that shut off my internet connection! I couldn't log into this site or any other site until I pulled the power plug on the Time Capsule.
    I have FIOS internet connected to my ethernet 2 plug and the Time Capsule connected to my ethernet 1 plug -- would it help if I reversed them?
    Your TC setup is wrong.
    You should bridge it.. If using Lion.. you poor guy.. expect endless networking issues..
    This is not caused by the TC.. guess where the issue is??
    To bridge you need to load in 5.6 utility because the one in Lion is useless.
    Then see these instructions.. particularly the last bit for how to bridge.
    https://discussions.apple.com/thread/4074627?tstart=30
    Then plug the computer directly into the TC and all should work fine.. don't forget to turn off wifi otherwise it might slow it down still.

  • How to set up Time Capsule as an external hard drive

    Hello,
    I tried finding the answers in here but wasn't able to. So I apologize if this redundant.
    Here's what I have that's important to my Q. I just bought a Time Capsule to replace my wireless router. I want to use the Time Machine for my MacBook and as an external hard drive for my 2 PCs. The wireless setup went smoothly, no concerns there. Same with the TM backup.
    I read in here you need to partition the TC so TM doesn't eat up all the hard drive space (and probably other reasons). I used the Disk Utility on my MacBook to partition the TC into 2 partitions, 250 GB for TM and 1.75 TB for the external drive. TM is a cool feature but not the primary reason why I bought the TC. 250 GB will be plenty of backup for that. I formatted the HD partition as MS-DOS (FAT), not sure that was the correct thing to do though but I didn't see a better option.
    From the PCs, I can see the TC on the network but it shows no signs of a partition. Is this normal? Should I be concerned? My goal is to put all my media on the TC. Right now I can erase the TC and start over if needed but I want to make sure I'm doing this right so I can set this up as I described. Do I even need to partition the TC? If not, how do I remove the partition now? The TC also only shows up as a network drive and not just another regular drive, I would imagine this is also normal.
    Thanks for your help in advance, JC

    jcbautista50 wrote:
    I used the Disk Utility on my MacBook to partition the TC into 2 partitions
    Are you saying that you used Disk Utility to partition the internal drive of the Time Capsule?  That's not supposed to be possible without taking the drive out of the Time Capsule.
    250 GB for TM
    Per normal Time Machine guidelines, this suggests that you never plan to back up more than 80--125 GB.
    1.75 TB for the external drive.
    So you also have an external drive attached to the Time Capsule?
    I formatted the HD partition as MS-DOS (FAT)
    The "HD partition" of what?
    From the PCs, I can see the TC on the network but it shows no signs of a partition.
    Did you configure the Time Capsule for disk sharing in the Disks panel of AirPort Utility?

  • How to set up time capsule to transmit in 5Ghz  and wireless router in 2.4ghz

    I have a time capsule connected to my wireless router. After a 2 year use the 2.4 ghz wireless network transmitting from TC seems to have issues. I am trying to configure my TC to transmit in 5ghz and my wireless router (Cisco) in 2.4 ghz, but I cannot find such option
    Thank you in advance

    I do not think there is any option to disable one of the radios on a TC - it is in dual simultaneous mode all the time with no way to alter that.
    Whether or not your Cisco supports that will depend on the specific model - check that models manual or on Cisco's site if you can alter the radios, and if so, how.
    I have a NetGear WNDR4500 (aka n900) and it is pretty simple to do on that - in the web configuration, as admin, you simple check or uncheck the box for each radio in order to turn them on/off.
    P.S. What if you just assign a new SSID to the radio you want off, and simply never set up your devices to connect to it?  That should force them to connect to the other radio (assuming the device supports that frequency itself).

  • How to set up Time Capsule with no internet or router wirelessly?

    Hi, I would like to know if it is at all possible to setup a Time Capsule wireless without the use of Internet or a router altogether.  I want to wireless set it up directly to a an Apple MacBook Pro.
    Thank you.

    If you decide to do this, the simplest way to accomplish your goal would be to download and install AirPort Utility 5.6 for Mac OS X Lion
    Perform a Factory Default Reset on the Time Capsule to get it back to default settings using this Apple support document:
    Resetting an AirPort Base Station or Time Capsule FAQ
    Then open AirPort Utility 5.6 and click Continue to follow the guided setup to "Create a wireless network".
    You will need to click "ignore" for messages that you see telling you that you do not have an Ethernet cable connected to the WAN port and also that you do not have an Internet connection.

  • How to set up time capsule

    I currently have time warner cable modem and a Netgear Wireless router (WPN824) to which I have a G5 desktop and G4 desktop connected via ethernet cable. I also have a macbook pro and macbook which connect to the ethernet via the wireless router. I need to be able to backup the laptops. Was able to do that for 1 day through the netgear router. Today I bought time capsule. It's my understanding it can replace the netgear router and be faster. Is that correct? Also, do I shut down computer, netgear and modem before setting up the time capsule? I want to set it up correctly and avoid problems. Planning on doing it this weekend while hubby is gone just in case I have problems.

    You will be able to back up both laptops wirelessly (provided you have 10.5 or higher). As for the desktops, sorry you are out of luck... Time Machine was not part of 10.4 ( I know you have 10.4 because you can not put 10.5 or higher on a G4; not sure about a G5) and you will have to use the BackUp program for both desktops. Best you buy two external hard drives for each desktop, for backing up. I think you could use the Time Capsule as a means to store the backups from the Backup program but I use my TimeCapsule strictly for the program Time Machine. As for replacing the NetGear router... go for it; as for going faster...perhaps. Very simple to set up - Perhaps 10 Min. You will need to download the program Airport Utility for all the computers though. No you do not want to use the TC as a bridge. A bridge is a smaller router that repeats or extends the signal. Don't worry your self about a bridge for what it sounds like you are trying to do. Good luck.

  • How to set up time capsule with existing network that uses airport express/extreme

    I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

    I suggest to use your airport express to extend your wireless network that is created by your new time capsule

  • Setting up Time Capsule on a wired network using PPPoE

    Hi. I just received a new Time Capsule and want to set up to provide service to my desktop and my laptop. It will be wired to the iMac and use wireless to the laptop (Macbook Air). My current router (a Linksys, not wireless by the way) is wired to the iMac. I access that router with Safari and set it up that way. I use PPPoE to connect to my ISP. So here are my questions (the Apple "manual" is a bit vague about the details).
    1) Connecting to the Time Capsule for setup. MUST I use Airport Utility or is there another method?
    2) Does the Time Capsule router (Airport Extreme, I assume) support PPPoE?
    3) I assume I can continue to let both machines connect using DHCP.
    4) Do I need to specifically assign addresses to the wireless network or will the Time Capsule router do that automatically?

    Welcome to the discussions, arbee!
    1) Connecting to the Time Capsule for setup. MUST I use Airport Utility or is there another method?
    AirPort Utility is the only application available to configure the Time Capsule
    2) Does the Time Capsule router (Airport Extreme, I assume) support PPPoE?
    During setup, you specify how you would like the device to connect, Ethernet or PPPoE
    3) I assume I can continue to let both machines connect using DHCP.
    Yes
    4) Do I need to specifically assign addresses to the wireless network or will the Time Capsule router do that automatically?
    The Time Capsule will automatically assign each wired or wireless device a network IP address

  • How do i set my time capsule up to function as an external hard drive

    How do i set my time capsule up to function as an external hard drive? Is this even possible? I had a friend tell me it woudl be a good set up to get a time capsule with my Macbook Air to use as a gigantic external hard drive but then was unbale to wlak me through the setup after I bought the equipment. Any suggestions?

    It depends on what you already have equipment wise..
    Just bridge the TC..
    I cannot walk you through it either if you use v6 airport utility.. due to my refusing to run Lion until it gets network issues sorted.
    Download and run the real utility http://support.apple.com/kb/DL1482
    Go to manual setup..
    Internet tab
    Connection sharing.. select off bridge mode in the drop down box.
    You can then if you like turn off wireless under airport wireless.. The TC is now a plain network client with hard disk.
    Personally I would keep the wireless on but sort the channels manually if you already have a wireless AP or router.

Maybe you are looking for