How to set up time capsule with ethernet?

How do I set up a Time Capsule using just ethernet? I have to do a complete backup (1 TB) (AGAIN!) and it will take forever using WIFI. And the instruction manual even says that the first complete backup should be done using just ethernet, --but you know what, it does NOT say how in the world to do that.
I thought I had stumbled into a few minutes ago, as I had turned off the WIFI and just had it connected to my MacPro just using an ethernet cable, and yet Time Machine was able to find it and start backing up to it ... but that shut off my internet connection! I couldn't log into this site or any other site until I pulled the power plug on the Time Capsule.
I have FIOS internet connected to my ethernet 2 plug and the Time Capsule connected to my ethernet 1 plug -- would it help if I reversed them?
This thing is seriously fouled up. Should have just bought a Firewire hard drive.

I thought I had stumbled into a few minutes ago, as I had turned off the WIFI and just had it connected to my MacPro just using an ethernet cable, and yet Time Machine was able to find it and start backing up to it ... but that shut off my internet connection! I couldn't log into this site or any other site until I pulled the power plug on the Time Capsule.
I have FIOS internet connected to my ethernet 2 plug and the Time Capsule connected to my ethernet 1 plug -- would it help if I reversed them?
Your TC setup is wrong.
You should bridge it.. If using Lion.. you poor guy.. expect endless networking issues..
This is not caused by the TC.. guess where the issue is??
To bridge you need to load in 5.6 utility because the one in Lion is useless.
Then see these instructions.. particularly the last bit for how to bridge.
https://discussions.apple.com/thread/4074627?tstart=30
Then plug the computer directly into the TC and all should work fine.. don't forget to turn off wifi otherwise it might slow it down still.

Similar Messages

How to set up time capsule with BT Infinity

how to set up time capsule with BT Infinity

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

HOW TO SET UP time capsule with time machine?

I have not been successful in setting up time capsule with the time machine,can someone give me steps to follow?

What part are you having problems with? You need to make sure File Sharing is enabled on the Time Capsule (which is done in AirPort Utility). Then you just connect to the Time Capsule either wirelessly or via ethernet cable and when you go to Time Machine setup your computer should recognize your Time Capsule as a valid storage for Time Machine backups.

How to set up time capsule with BT home hub 4.0 & Openreach

Idiots guide needed.
My TimeCapsule (year old model) had been running well from my BT Openreach box (without using the Home Hub 4.0) but recently had issues with connection dropping - BT said they've sorted out their end and can't see any remaining issues and can't offer me any more support if I'm not using the Home Hub 4.0
I reset the TC to run straight from the Openreach Box still have issues with wi-fi dropping in and out (both on ethernet and wi-fi).
Can I:....
1) set up Time Capsule running from BT Home Hub 4.0 which itself runs from BT Openreach white box (thus continuing to get support from BT)
or should i go back to
2) Time Capsule running straight from BT Openreach Box
Can some one post an idiots guide to either option?
Other stuff that may be important.
Macbook air running Yosemite (mid 2011 model)
Apple TV
Airportexpress
Time Capsule
2 x iphone 4s
Kids PC
Ethernet and wifi for above - I generally run everything hard wired via ethernet.

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

How to set up time capsule with router

I have a router N 300 and would like to buy time capsule but I did not find any information how to set up bouth devises. Thanks

You can always bridge the Time Capsule.. it is easy. Once bridged the time capsule will no longer route. All routing is then handled by the original router.. N300 (which could be belkin or netgear and maybe other people call then N300). It will still work as a wireless access point.. unless you turn it off, a switch with WAN now allocated to LAN, and a network drive.
Just look up bridge.
But there are other ways to do things. You could replace the N300, unless it is a modem.. in which case you can bridge that and use pppoe client on the TC (if you ISP does pppoe).

How to set up time capsule with att uverse

So I'm thinking about getting a time capsule for my home network. I have several apple (Macbook pro, Ipad, Iphone) products and i think it would be convennient to have. The only problem I think I will be facing is seting up the time capsule along side with my Att uverse 2wire router. So i have several questions:
1) I have wireless receivers for my tvs that receive the signals from the main uverse 2wire modem/router. Now I read online that you can turn of the wireless router function of the main 2wire modem/router and just turn it in to a modem (from what I understood at least). So my question is if I turn of the wirless function of the main uverse 2wire router, will that affect me watching tv with the wireless recivers that uverse provided me???
2) I know I can probably go around the issue on question 1 by putting the time capsule in to bridge mode, but will I loose any functions on the time capsule by doing so? Will accessing the hard drive be possible if its on bridge mode?.
3) If getting a time capsule is not worth it bacause there is no way around the issues in the first two questions then is there another product that I can use that might be better for my situation?
Im no IT genius but I know my way around so I am comfertable trying to set it up I just need some guidence. Any help will be greatly appreciated it!!

So my question is if I turn of the wirless function of the main uverse 2wire router, will that affect me watching tv with the wireless recivers that uverse provided me???
The other receivers will not work if you turn off the wireless on the Uverse gateway.
I know I can probably go around the issue on question 1 by putting the time capsule in to bridge mode, but will I loose any functions on the time capsule by doing so?
The Time Capsule will need to connect to the Uverse gateway using an Etherent cable. The Time Capsule will be able to provide another wireless network when it is set up this way, but it will not be able to provide an additional Guest Network.
Will accessing the hard drive be possible if its on bridge mode?.
Yes
If getting a time capsule is not worth it bacause there is no way around the issues in the first two questions then is there another product that I can use that might be better for my situation?
This really depends on how many Macs that you need to back up. The Time Capsule can back up multiple Macs on a network. If you don't need that type of capability, then it would be much simpler, and a lot less expensive to connect a hard drive directly to your Mac and back up the Mac that way.
Half of the cost of the Time Capsule is tied up in a wireless router, so if you don't plan to use the wireless on the Time Capsule, you will be paying for features that you do not use.

How to set up Time Capsule with no internet or router wirelessly?

Hi, I would like to know if it is at all possible to setup a Time Capsule wireless without the use of Internet or a router altogether. I want to wireless set it up directly to a an Apple MacBook Pro.
Thank you.

If you decide to do this, the simplest way to accomplish your goal would be to download and install AirPort Utility 5.6 for Mac OS X Lion
Perform a Factory Default Reset on the Time Capsule to get it back to default settings using this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ
Then open AirPort Utility 5.6 and click Continue to follow the guided setup to "Create a wireless network".
You will need to click "ignore" for messages that you see telling you that you do not have an Ethernet cable connected to the WAN port and also that you do not have an Internet connection.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

How to set up time capsule with existing network that uses airport express/extreme

I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

I suggest to use your airport express to extend your wireless network that is created by your new time capsule

How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
Click on the Wireless tab at the top of the page
Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
Then, you must power off your entire network...all devices....in any order that you want
Wait a minute
Start your modem/router first and let it run a minute
Start the Time Capsule and let it run a minute
Keep starting devices one at a time until everything is powered up
If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup or, it might be Use Disk
Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

Connect apple tv to time capsule with ethernet?

How do you connect apple tv to time capsule with ethernet?

Oh, that's so sad. . Im sorry, but this problem requires professional help. At least I can't help you. Here is a link to Apple - Support - Contact Support.

How to use my Time Capsule with my Router?

My Time Warner Cable HS connection uses a specific modem, the Motorola Surfband SBG6580.
I was currently using my Tiem Capsule as my router and just a Cable Modem from Time warner, but this particular service uses this wireless router. I need to get my Apple Time Capsule back into my netowrk.
I would either like to understand how to use the Motorola as a switch or just as a modem so I can use the Time Capsule as my router or vica versa, use my Time Capsule as just a back up drive and leave the Motorola as my rwireless router. The onyly thing about this second configuration is that I need to connect to the Time Capsule wirelessly with one of my computers for back up, the other two are both on an ethernet port hard wired.
So this is what I have to put in place:
Motorola Wireless Cable Modem
Time Capsule
5 Port EasyNet Switch
iMac Desktop (Ethernet hardwired)
Macbook (Ethernet hardwired)
MacBook (wirelessly connected to the network)
Any thoughts great appreciated.
Henry

It's likely that your ISP will require that the Cable Modem is the first device in the chain. You do need to set the Time Capsule to Bridge mode, disabling the DHCP. Now, the Cable Modem is providing DHCP to devices that connect to it, and devices that connect to the Time Capsule.
You will be able to wirelessly connect to the Time Capsule and network.
Here is a simple article explaining:
http://www.ehow.com/how5309467bridge-time-capsule-mac-pc.html

How to back up time capsule with carbonite, how to back up time capsule with carbonite

how do you back up your time capsule with carbonite if you set it up as hardrive not as backup?

You have to upgrade to Carbonite HomePlus or higher.

HT1178 How setup and configure time capsule with ADSL modem for WiFi internet

For my first time time capsule 2TB set up,would like to know about configuration time capsule with ADSL modem for use WiFi internet!

You will want to turn off the WiFi on your modem (if there is WiFi on your modem). Connect the TC and the modem together with an Ethernet cable. Then, turn on your TC and set it up to be in bridged mode, connection type 'Ethernet'.

How to use the time capsule with my existing router?

Here is my situation. I have Alltel PCD UM185 USB modem for their mobile broadband internet. I have a Cradlepoint MBR1000 router which I plug the usb modem into to share the internet through a wireless network which has WPA security on it. I want to use my 1TB time capsule to backup the computers in my house wirelessly and not as a router. What connection do I need to make and how to do I setup the time capsule this way? I can't figure it out. Thanks for any help in advance. If you need more information just ask.
Thanks,
John

Steven's solution will work just fine if you want to connect the Time Capsule using ethernet.
You might also consider configuring the the Time Capsule to "Join" the wireless network. In this type of configuration, backups would occur only over wireless and you could locate the Time Capsule virtually anywhere it can receive a good, strong wireless connection. Important Note...the ethernet ports on the Time Capsule are not enabled in this type of configuration, so you will not be able to connect using ethernet.
Open AirPort Utility and click Continue
Then select the option to "Join a wireless network" and follow the prompts

How to set up time capsule with ethernet?

Similar Messages

Maybe you are looking for