How to set up time capsule with existing network that uses airport express/extreme

I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

I suggest to use your airport express to extend your wireless network that is created by your new time capsule

Similar Messages

How to set up time capsule with BT Infinity

how to set up time capsule with BT Infinity

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

How do I add time capsule to existing network?

How do I add time capsule to existing network?

Ok.. I am still confused as an Express only has one ethernet for LAN not 4. So you perhaps have an extreme..
If you have an airport extreme.. plug the TC into the extreme with ethernet.. and set it up as bridge in router.
You can also create a wireless network that works alongside the extreme.. this is the best way.
It is also possible to setup the TC to extend the wireless of the extreme.. but this will make backups much slower.. at least half the speed if not worse.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

HOW TO SET UP time capsule with time machine?

I have not been successful in setting up time capsule with the time machine,can someone give me steps to follow?

What part are you having problems with? You need to make sure File Sharing is enabled on the Time Capsule (which is done in AirPort Utility). Then you just connect to the Time Capsule either wirelessly or via ethernet cable and when you go to Time Machine setup your computer should recognize your Time Capsule as a valid storage for Time Machine backups.

How to set up time capsule with BT home hub 4.0 & Openreach

Idiots guide needed.
My TimeCapsule (year old model) had been running well from my BT Openreach box (without using the Home Hub 4.0) but recently had issues with connection dropping - BT said they've sorted out their end and can't see any remaining issues and can't offer me any more support if I'm not using the Home Hub 4.0
I reset the TC to run straight from the Openreach Box still have issues with wi-fi dropping in and out (both on ethernet and wi-fi).
Can I:....
1) set up Time Capsule running from BT Home Hub 4.0 which itself runs from BT Openreach white box (thus continuing to get support from BT)
or should i go back to
2) Time Capsule running straight from BT Openreach Box
Can some one post an idiots guide to either option?
Other stuff that may be important.
Macbook air running Yosemite (mid 2011 model)
Apple TV
Airportexpress
Time Capsule
2 x iphone 4s
Kids PC
Ethernet and wifi for above - I generally run everything hard wired via ethernet.

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

Using Time Capsule with existing network?

I am planning on purchasing a Time Capsule, but would like to know if it's right for me before I buy it. Can someone please answer these questions I have about it;
What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
Can iOS access the files or back up to the Time Capsule?
If I connected a printer to the Time Capsule, can iOS devices use it to print?
I know there's a lot of questions, but I'd appreciate any help with any of the questions.
Thanks.

What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
There is a device password that will be required of any user who wants to access the Time Capsule disk. If the Time Capsule is also configured to provide a wireless network, users will need to enter the wireless network password to be able to connect to the network.
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
In this case, the Time Capsue would be configured to operate in Bridge Mode. It functions as another Ethernet switch in that type of setup. Speed should not be affected.
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Yes, since the Time Capsule will be in Bridge Mode, devices that connect through the wireless on the Time Capsule will be on the same network as your main router...users connecting through the wireless on the Time Capsule and will be able to "see" other network devices.
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
No. In order to partition the Time Capsule drive, it would need to be removed from the Time Capsule case, placed in a separate caddy or enclosure and then connected directly to your Mac to allow Disk Utility access to the disk for the partition procedure. Then, you would have to reinstall the Time Capsule drive back in the Time Capsule case.
In addition to a lot of work, this will void the warranty on the product.
Can iOS access the files or back up to the Time Capsule?
iOS devices back up to iTunes on your computer. Then, when a Mac backs up to the Time Capsule using Time Machine, all of the data is backed up. In other words, iOS devices cannot back up directly to the Time Capsule drive using Time Machine.
Using an App like Filebrowser, it is possible to have the iOS device browse the contents of the Time Capsule drive, but the iOS device will not be able to open files that have been backed up using Time Machine.
The iOS device will likely open most other normal files stored on the Time Capsule drive if the proper App is installed on the iOS device.
If I connected a printer to the Time Capsule, can iOS devices use it to print?
Yes if the printer is AirPrint compatible. Check this Apple support document to see if your printer is on the list of compatible devices.
http://support.apple.com/kb/HT4356
Otherwise, you can add an App like Print Central to the iOS device to possibly allow printing from the iOS devices.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

How to set up time capsule with router

I have a router N 300 and would like to buy time capsule but I did not find any information how to set up bouth devises. Thanks

You can always bridge the Time Capsule.. it is easy. Once bridged the time capsule will no longer route. All routing is then handled by the original router.. N300 (which could be belkin or netgear and maybe other people call then N300). It will still work as a wireless access point.. unless you turn it off, a switch with WAN now allocated to LAN, and a network drive.
Just look up bridge.
But there are other ways to do things. You could replace the N300, unless it is a modem.. in which case you can bridge that and use pppoe client on the TC (if you ISP does pppoe).

How to set up time capsule with att uverse

So I'm thinking about getting a time capsule for my home network. I have several apple (Macbook pro, Ipad, Iphone) products and i think it would be convennient to have. The only problem I think I will be facing is seting up the time capsule along side with my Att uverse 2wire router. So i have several questions:
1) I have wireless receivers for my tvs that receive the signals from the main uverse 2wire modem/router. Now I read online that you can turn of the wireless router function of the main 2wire modem/router and just turn it in to a modem (from what I understood at least). So my question is if I turn of the wirless function of the main uverse 2wire router, will that affect me watching tv with the wireless recivers that uverse provided me???
2) I know I can probably go around the issue on question 1 by putting the time capsule in to bridge mode, but will I loose any functions on the time capsule by doing so? Will accessing the hard drive be possible if its on bridge mode?.
3) If getting a time capsule is not worth it bacause there is no way around the issues in the first two questions then is there another product that I can use that might be better for my situation?
Im no IT genius but I know my way around so I am comfertable trying to set it up I just need some guidence. Any help will be greatly appreciated it!!

So my question is if I turn of the wirless function of the main uverse 2wire router, will that affect me watching tv with the wireless recivers that uverse provided me???
The other receivers will not work if you turn off the wireless on the Uverse gateway.
I know I can probably go around the issue on question 1 by putting the time capsule in to bridge mode, but will I loose any functions on the time capsule by doing so?
The Time Capsule will need to connect to the Uverse gateway using an Etherent cable. The Time Capsule will be able to provide another wireless network when it is set up this way, but it will not be able to provide an additional Guest Network.
Will accessing the hard drive be possible if its on bridge mode?.
Yes
If getting a time capsule is not worth it bacause there is no way around the issues in the first two questions then is there another product that I can use that might be better for my situation?
This really depends on how many Macs that you need to back up. The Time Capsule can back up multiple Macs on a network. If you don't need that type of capability, then it would be much simpler, and a lot less expensive to connect a hard drive directly to your Mac and back up the Mac that way.
Half of the cost of the Time Capsule is tied up in a wireless router, so if you don't plan to use the wireless on the Time Capsule, you will be paying for features that you do not use.

How to set up time capsule with ethernet?

How do I set up a Time Capsule using just ethernet? I have to do a complete backup (1 TB) (AGAIN!) and it will take forever using WIFI. And the instruction manual even says that the first complete backup should be done using just ethernet, --but you know what, it does NOT say how in the world to do that.
I thought I had stumbled into a few minutes ago, as I had turned off the WIFI and just had it connected to my MacPro just using an ethernet cable, and yet Time Machine was able to find it and start backing up to it ... but that shut off my internet connection! I couldn't log into this site or any other site until I pulled the power plug on the Time Capsule.
I have FIOS internet connected to my ethernet 2 plug and the Time Capsule connected to my ethernet 1 plug -- would it help if I reversed them?
This thing is seriously fouled up. Should have just bought a Firewire hard drive.

I thought I had stumbled into a few minutes ago, as I had turned off the WIFI and just had it connected to my MacPro just using an ethernet cable, and yet Time Machine was able to find it and start backing up to it ... but that shut off my internet connection! I couldn't log into this site or any other site until I pulled the power plug on the Time Capsule.
I have FIOS internet connected to my ethernet 2 plug and the Time Capsule connected to my ethernet 1 plug -- would it help if I reversed them?
Your TC setup is wrong.
You should bridge it.. If using Lion.. you poor guy.. expect endless networking issues..
This is not caused by the TC.. guess where the issue is??
To bridge you need to load in 5.6 utility because the one in Lion is useless.
Then see these instructions.. particularly the last bit for how to bridge.
https://discussions.apple.com/thread/4074627?tstart=30
Then plug the computer directly into the TC and all should work fine.. don't forget to turn off wifi otherwise it might slow it down still.

How to set up Time Capsule with no internet or router wirelessly?

Hi, I would like to know if it is at all possible to setup a Time Capsule wireless without the use of Internet or a router altogether. I want to wireless set it up directly to a an Apple MacBook Pro.
Thank you.

If you decide to do this, the simplest way to accomplish your goal would be to download and install AirPort Utility 5.6 for Mac OS X Lion
Perform a Factory Default Reset on the Time Capsule to get it back to default settings using this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ
Then open AirPort Utility 5.6 and click Continue to follow the guided setup to "Create a wireless network".
You will need to click "ignore" for messages that you see telling you that you do not have an Ethernet cable connected to the WAN port and also that you do not have an Internet connection.

Setting up time capsule with existing wireless router and another time capsule

Hello,
I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
Is this true?? I find it hard to believe this issue hasn;t come up before.
Thanks,
Deborah

Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
Would I need to connect my time capsule directly to the router for first time set up?
If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
Thanks, I really appreciate your help!
Deborah

Setting up Time Capsule on existing network

Apologies if this has been answered before, I looked at relevant discussions but couldn't find the exact solution.
I currently use a FIOS router/connection which I share with my roommate. I just purchased a TC that I intend to use for backups.
Ideally, I'd like to keep the TC in my room (not where the router is), but this is not completely necessary. And obviously, I'd prefer whichever option provides the best speed for internet connection. Backup speed is secondary, as my computer is not going anywhere (it's a desktop).
What is the best way to set up the Time Capsule: should I plug it into the router via Ethernet? The computer via Ethernet? Is there a way to do it all over wireless?
I'm using a new TC with a Mac Pro, OS 10.9.2.
Your help is much appreciated!

You can locate the TC anywhere that an Ethernet cable will reach. Runs up to 300 feet are possible with virtually no signal loss.
Best performance option.......Ethernet from the router to the TC.....Ethernet from the TC to the Mac
Next best option.....Ethernet from the router to the TC.....Wireless from the TC to the Mac
Expect a 15-25% loss in speed with each wall that the wireless signal must pass through between the TC and the Mac. Here, I am assuming that you do not have cement walls.

HT1178 How setup and configure time capsule with ADSL modem for WiFi internet

For my first time time capsule 2TB set up,would like to know about configuration time capsule with ADSL modem for use WiFi internet!

You will want to turn off the WiFi on your modem (if there is WiFi on your modem). Connect the TC and the modem together with an Ethernet cable. Then, turn on your TC and set it up to be in bridged mode, connection type 'Ethernet'.

How to set up time capsule with existing network that uses airport express/extreme

Similar Messages

Maybe you are looking for