How to set up tv as display

I recently purchased a mini dvi to s-video/RCA cable and hooked up my macbook to my sharp lcd tv using a RCA video cable. At first I had nothing but static but after messing around with the display settings i got the tv to display the right half of my desktop on the left hand of the screen and left of my desktop on the right of the tv and the whole picture is scrolling up repeating itself does anyone know how to fix this.

I'd hate to have you buy another adaptor, but does the TV by any chance have a VGA or DVI inputs? I do this hookup all the time for customers and every time I'm forced to use S-Video or Composite I run into trouble. If the TV has VGA (like a regular computer monitor), you shouldn't have any problem. I strongly suggest this option if at all possible, as the maximum resolution from what you have is around 640x480-- not exactly what you're used to seeing on that TV.
If VGA is possible, you can find the adaptor you need here from Apple.

Similar Messages

How to set a view in display mode??

Hi,
I have created a new view in overview page of BT111H_OPPT.
This view is of table type and associated with value node .
I am able to display contents of table on UI but they are in editable mode.
I need them in display mode .
How to achieve this functionlaity??
Any suggestions will be helpful.
thanks
kanika

Hi Kanika,
There are 2 ways:
In the configuration of your view you can set the fields as display mode.
In the method get_i* of your atributtes you can disable the field too.
I think the better solution is using the configuration.
Best regards,
Caíque Escaler

How to set full-screen page displaying automatically on portal.

one viewset included two views (named topView and detailView)
putting a table control in the detailView,boz of many columns of the table exceed the width of portal screen,which result in the topView is the same width to the detailView.both of the two views exceed out of the full-screen width.but i don't wanna move the topView when i drag scroll horizontal bar control. so i added a ScrollContainer into the detailView,and put the talbe control into it.
the confusoning is :i don't know how to set the the width of the ScrollContainer cotrol , to keep it full-page displaying any time on portal .
u know the IE'Screen resolution setting maybe different ,e,g,:1024786px and 800600px.

HI,
Give the width in % instead of mentioning in pixels.
ie. for full width, give 100%.
Make sure the layout is GridLayout.
Regards
Fahad Hamsa

How to set one layout to display only?

Hello, Expers,
I want to display only one layout. The scenario is: when the user input some data in a layout and click on one 'input finish' function button which means that the user has finished input data in that layout, then the system will set that layout to display only. I don't want to use the variable with comparion column because that will also cause all the layout to display only. What I want to do is just set only one layout to display only. Anyone know how to do?

Dear guqing,
please take a look at
http://help.sap.com/saphelp_nw70/helpdata/en/45/9d0fbe42c40063e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/174720c5dd3db4e10000000a422035/frameset.htm
You can use the command SET_INPUT_MODE or SET_DATA_ENTRY_MODE
Regards
Matthias Nutt
SAP Consulting Switzerland

How to set default settings to display record count in multi record block

Hi All
Whenever I query my multi record block, I get 1/? as record count at the console in standard Oracle Applications. Is there any setting so that it displays 1/50 (in case total record queried is 50). I don't want to set query all property of block as I don't have any control in standard Apps forms.
Thanks in advance
Navdeep

Check out the next_navigation_item option for the get_item_property procedure. If you use this you can do the process without having to navigate from one item to the next.
You can do something like this (untested) to move and resize the items (other than the first in the block):
PROCEDURE move_and_resize(p_item IN ITEM, p_width IN PLS_INTEGER) IS
  prev_item ITEM := Get_Item_Property(p_item, PREVIOUS_NAVIGATION_ITEM);
BEGIN
  Set_Item_Property(p_item, WIDTH, Get_Item_Property(p_item, WIDTH) + p_width);
  Set_Item_Property(p_item, X_POS, Get_Item_Property(prev_item, WIDTH) +
                                   Get_Item_Property(prev_item, X_POS));
END move_and_resize;
move_and_resize(myitem, -30);

How to set PDF file default display size through Report Writter 6i

Anyone could help me, how to setup default display (magnification i.e 100% or 80%) for a pdf file generated by report writter 6i.
Thanks
Raj

hi,
regarding report, there is a dedicated report forum. you should post there.
but answer for your question is form is nothing to do with the pdf generation. you can call the report from the as usual.
In the report you should set the properties like
destype to 'file'
desname to 'path with file name'
desformat to 'pdf'

How to Set Assignment block in Display mode

Hi All,
I have a Z assignment block in Account (BP_Head), requirement to set this assignment block in display mode only.
No user allowed to edit its edit list.
Could you help me how to do that with sample code and event.

HI,
In configTable set attribute displayMode = "TRUE". Then this AB will be always in display mode
displayMode            = "TRUE" or
if you ar using configCelleator uyou need to give iv_all_rows_editable = space
cl_thtmlb_util=>translate_selection_mode(
exporting
iv_selection_mode    = ITEMS->SELECTION_MODE
iv_all_rows_editable = space
importing
ev_selection_mode   = lv_cellerator_selectionmode
ev_edit_mode        = lv_cellerator_editmode
ev_selection_column = lv_cellerator_selectioncolumn ).
Regards,
Deepika.

How to set scrolledPane/textArea to display last lines?

I have a JTextArea in a JScrollPane.
I'm adding to the text area and the information scrolls off the visible portion of the screen.
How can I force the scrolling to always display the last lines at the bottom of the screen when they are added?
Thanks.

See [url http://www.camick.com/java/blog.html?name=text-area-scrolling]Text Area Scrolling

How to set a train stop display name programmatically

JDeveloper 11.1.2.4
Any ideas?
Thanks in advance
jleon

This article http://www.oracle.com/technetwork/issue-archive/2011/11-sep/o51adf-452576.html shows how to do this.
Timo

How to set a JScrollPane always display the last line?

I have put a JTextArea in a JScrollPane.
Whenever I append a new line of sentence to the JTextArea, the JScrollPane only shorten the vertical scroll bar.
Is there any command that can scroll down to the last line whenever I append a new sentence to the JTextArea?

I have tried to add the line you shown, but it can just show the second last line. It cannot scroll down to the last line.
e.g. I have these message:
AAA
BBB
CCC
If the message board can only show 3 lines and I enter one more line "DDD", then the last line will be shown is CCC. I need to scroll down a bit more myself to see DDD. If I scroll to the top and enter another line"EEE", it will scroll down to show "DDD" but not "EEE".

How to set up my display to be the main view HELP

How to set up my external display automatically work as the main display when plugged into my MacBook Pro. I had it set up to work this way on my old MBP but I got a new MBP with Mountian Lion and the Display set up seen different and I can figure out how to make my Apple HD display (about 3 years old) be the main display when I turn on my MBP. Mirror is off when I look at
System pref’s – Display – Arrangement I just get to pick which display is left and right. I cant remember how it was set up on my old MBP. Mirroring does me no good. Any help will do!!!
Thanks Brad

In System Preferences > Displays > Arrangement tab. Drag the little grey rectangular "menubar" to the other monitor.

How to get Hongkong Map to display 繁體 when cellpho...

How to set Hongkong Map to display 繁體 but keeping cellphone lanaguage in English?
I want to keep all interfaces in English, only local maps of China, Taiwan, Hong Kong & Macau to have street names in Chinese language (either 繁體 or 简体). The PinYin is an alien language to me.

Thanks farby. It is a pity there is no option to switch between the languages. Most locals here are bilingual and for some reason prefer to have the menus set in English but the maps. And those pin-yin names of places are not proper English names either.

How do i set up a second display for my iMac desktop? I want to use both displays at the same time.

how do i set up a second display for my iMac desktop? I want to use both displays at the same time. My iMac is the 24" Late 2006 model. I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time. thank you.

If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
Noting that the (digital) DVI is far better than the (analog) VGA connection.
Also see > Using Dual Displays on Mac OS X: The Experience

Two Apple Displays and Mac Pro - How To Set Up?

Hello! My boyfriend surprised me yesterday with a second 23" Apple HD Display! Fed Ex delivered it and I had no idea it was coming! Before I take the plunge I need to know how to set it up so it works as with my current Mac Pro and 23" display so that they work together, as one big screen. I have the ATi X1900 graphics card with 512mg of RAM and two DVI ports and assume that will be sufficient to run both displays.
Is it possible to use them as one large screen? If so, how do I set that up? If I just plug it in and restart, will the two screens work as one or as separate screens?
Thanks!
Lisa

I did the same thing last night, and if you haven't just plugged it in already, it's really as simple as that.
I get a little video glitch on my main startup screen when I'm booting up, but otherwise it just works smoothly. Plug it in, and go.

How do i set up a dual display with touchsmart520pcs.

I would like to use a dual display on my PC. Tried to connet the USB HDMI display adapter (j5create, JUA250) but my 2nd monitor was not display any after installing the driver and setting up the screen resolutions. would apprciate if any advices how to set up my PC fon this
PC : HP touchsmart520pc (1151b), All in one type, which do not have any outputs of HDMI, DVI, D-SUB.
OS :windows7
Monitor : LG E2360V-PH, which has a HDMI, DVI and D-SUB output.
would appricate if any advices.

Did you try using the Start, All Programs, Accessories, Connect to a Projector and choosing Extend or Duplicate?

How to set up tv as display

Similar Messages

Maybe you are looking for