How to set up user account in Windows 7/Premiere Elements 8.0/8.0.1?

At the present time I have only the Windows XP Professional SP3 32 bit operating system which works from a User Account with Adminstrative Privileges when it comes to using Premiere Elements.
I have read that in Windows 7, the default user account is one with standard rights. My first question is, when using Premiere Elements 8.0/8.0.1 in general in a Windows 7 32 or 64 bit environment, do you have to elevate the user account to one with adminstrative rights and, if so, how?
My second question is, is there anything in the Windows 7 user account setup that would specifically target the Premiere Elements Project Archiver/Archiver "Trimmed" as well as Copy options to abort with the message "no user privileges to perform this operation"? The rest of the program performs OK. Supposedly inadequate hard drive space is not a factor.
Thanks for any insights into these two questions.
ATR

SG
Just an update to the question that I presented when I started this thread.
You really never did say what type of a User Account you are using in your Premiere Elements 8.0/8.0.1 on Windows 7? But based on the information provided by several users, User Account with Administrative Rights seems to be the way to go since all of them were using it and had systems that were running well. I would have expected that based on the Premiere Elements Windows XP requirements. I have yet to have someone come forward to say that they are using Premiere Elements 8.0/8.0.1 on Windows 7 with a User Account with Standard Rights and the program is running well. Will you be that one?
Besides me switching from Windows XP to Windows 7 in the near future, what motivated this line of questioning was the report that I had seen of a user with Premiere Elements 8.0/8.0.1on Windows 7 who was reporting "permission" error messages when trying to archive a project with the Project Archiver (Archiver "Trimmed" and Copy options). Further questioning brought out that the problem extended to the AutoSave feature as well. The user claimed to be saving to an external hard drive (formatted NTFS) with about 800 MB free space. And still further questioning brought out that the error message included a free space and/or permissions error. Yes, there were extremely large file sizes involved here (way over 4 GB)
The story had a happy ending where the remedies were:
1. User Account with Administrative Rights
and the major
2. Formatting the thought to be NTFS external hard drive from FAT32 to NTFS.
ATR

Similar Messages

How to set up user account and share folders

We are a family of four sharing our first iMac. I would like to set up one account for my wife and I and one account for my kids on which I plan to enable Parental Controls.
I have struggled with setting up my kids user account. After setting up a Standard account for the kids - I noticed none of our music or files were visible in the kids accounts. I spent 20 min on the phone with Apple and the tech was clueless. He had me copying my music folder all over the computer until I had about 6 copies of the same folder. I did figure out how to move the music library to SHARED folder and redirect iTunes source folder to the same shared folder.
My problem now - when I copy my documents to the SHARED folder my kids can see the files and open them, but they can not save them. How do I give the kids account read write privileges?
Should I set up a GROUP account instead?
I need the best way to have two or three users who can access all data on the same iMac, while giving me the ability to enable Parental Controls on the accounts.

Do this:
Here's how to set it up by using ACLs:
1. Create a new folder in /Users/Shared. Call it "Sharefolder".
2. Log in to an Admin account, open Terminal and paste in all of this at the same time:
chmod -R +a "everyone allow delete,chown,list,search,add_file,\
addsubdirectory,delete_child,file_inherit,directoryinherit" \
/Users/Shared/Sharefolder
That will automatically make everything copied or created to the sharefolder writable by all users. Note: After setting this up, if you have existing files that you want to move to the sharefolder, hold down the option key when dragging them in. That will make new copies of them in the sharefolder. Dragging existing files in (i.e. simply moving them there) won't cause the ACL to inherit properly and they won't be writable by all users. Files that are copied or +newly created+ in the sharefolder shouldn't have this problem.
Make sure you keep good backups. One user accidentally deleting a shared file will affect everybody else who uses it.

How to unlock user account in Windows Server 2003

Hi,
I want to unlock a user account in Windows Server 2003.
I have read a great post at http://forums.sun.com/thread.jspa?threadID=716240&start=0&tstart=0
But I can not get it to work. According to the post the only thing you need to do is:
"+to unlock an account, just set the value of the attribute lockoutTime to zero+".
When I set lockoutTime to zero nothing happens. The user can still not logon.
When I read the lockoutTime attribute for an account that is locked it is empty or zero if I have tried to unlock it earlier.
So it doesn´t seem to change when the account is locked.
Thanks!

Hi,
Windows Server 2012 has come with the concept of Group Managed Service Account (gMSA).
Following are the benefits of gMSA,
- A single gMSA can be used on multiple hosts.
- A gMSA can be used for scheduled tasks.
- A gMSA can be used for IIS Application Pools, SQL 2012 etc.
Checkout the below link regarding complete information on gMSA (creation and usage),
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/5bc96d1b-0cec-4d0c-a99d-7f34509c0714/how-to-use-correctly-managed-service-account-in-windows-server-2012-?forum=winserverDS
Regards
Gopi
JiJi Technologies

Some how I missed the set up assistant on my mac mini now I can't set up user accounts as I don't have a password ...help

some how I missed the set up assistant on my mac mini now I can't set up user accounts as I don't have a password ...help

Hmmm, did it come with an Install Disc? What OSX version is it?
I wonder if this old method still works...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
It'll boot like a newly setup Mac, if it works.

Can I install iTunes in separate user accounts on Windows Vista 64-bit?

Hi,
My wife and I use different user accounts on Windows Vista 64-bit. Before I go and mess things up on my computer, I wanted ask some questions:
1) Has anyone has successfully installed iTunes to multiple user account?
2) If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
I'm thinking with iTunes very tight integration with the music files (for indexing/searching, etc), that it would be bad to have add/change/delete on the same music root from 2 independent installations.
Experience OR opinions welcome!

) Has anyone has successfully installed iTunes to multiple user account?
You don't install the iTunes application more than once. Each user account in Windows will have its own iTunes library.
If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
Many people have done so. This should help:
iTunes: How to share music between different accounts on a single computer
Note that iTunes has no folder-watching capability, so if you add a track in one user account, the other user will have to add that new item manually, either by using the Add To Library command or dragging the item into the iTunes window. There are a couple of potential solutions from other developers, though:
http://albumbrowser.klarita.net/iTunesFolderWatch.html
http://www.lifehacker.com/software/itunes/hack-attack-automatically-sync-itunes- to-any-folders-175161.php
Thanks to Meg and Hudgie for the tips.

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

Corrupted User Accounts in Windows Vista 64 Home Premium?

***FYI I'm using my desktop.
Toshiba Satellite L305-S5908
Model #: PSLB8U-05202F
Windows Vista 64
So just today, I had accidently dropped my laptop. I was logged into my user account, and it completely froze a few moments after. I had to reboot it, and when I did, I could not log in to my user account at all! I would be able to type in the password, but once I hit ENTER, it turned blank with only the Windows Vista 64 background displaying. I went on safe mode, and surprisingly, I was able to log onto the user account.
I have another user account (that I rarely use) that I could log on to safe mode as well. However on normal start-up, I was able to log in, but then it completely froze again. The second time I tried to log onto that user account, the computer completely froze when I was about to type in the password.
From what Toshiba support told me, the User accounts must have been corrupted from the drop, and they told me to Google "How to fix corrupted user accounts". However, from research I am supposed to create a new user account but I cannot make a new one because I cannot log into any of the user accounts at all. (They cannot help me any further because my warranty expired.)
So, I'm turning to you forum. How do I fix this?

I deleted the bad user accounts, and saved their files into the new user account.
The proper way to copy a profile is detailed here.
Fix a corrupted user profile
I did Disk Check again, and it got past the previous stuck point, but it is now stuck on the 524373th free cluster. Should I make a new thread dealing with the new issue I have?
I forgot to mention that it may be necessary to run chkdsk /r many times.
No necessity for a new thread.
...seems like I have to pay for it?
Yes, SpinRite costs money. But it's a good product and the circumstances may warrant it. It might come in handy for another drive in the future as well.
In this case, you may prefer to purchase a new drive. It may turn out that you need a new drive in any case. Certainly, you should be prepared for that by having the recovery discs.
-Jerry

How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
connections, and the controls to make sure only one user uses a particular
connection at any one time. If you want to have different DBMS users, you can
have a separate pool for each DBMS user, which may contain as many or few
connections as you want. Some applications has a pool for the accounting
applications, and another for the sales applications etc. Some do have a
separate pool for john, jane, joe etc, each with one connection. Pools
can be created and destroyed dynamically using the dynamic pool API.
Joe
softstar wrote:
>
Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hide User Accounts on Windows 7 Logon

Hi I Just Installed Windows 7 and Want to hide other user accounts on Windows 7 64 and actually Windows Vista so the only Account showing is mine how do I do This, am I right in thinking it has to be done through the registry;
HKEY_LOCAL_MACHINE \SOFTWARE \Microsoft \Windows NT \CurrentVersion \Winlogon, but I do not know how to prceed from this point can some help please

The following will work for a computer in a workgroup (using the welcome page).
For Windows 7 Enterprise (maybe others) you will also need to add a second key below SpecialAccounts called "UserList". Put all the accounts in that subkey.
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList
I have confirmed this to work on a fresh installation with multiple user accounts and not joined to a domain. I have also confirmed this on my Windows 7 Ultimate computer I use at home. I use the hidden (but not disabled) accounts to provide share access in
a workgroup environment, so I don't want to see them on the logon page. I think the proper workaround for share access is using homegroups instead, but I don't think it provides enough granularity for me.
Ok,
So now that I have done this, I cannot logon to the machine with those accounts anymore or use the admin priviledges for them. I thought it would just hide the accounts. The problem is, I 'hid' all admin accounts, but thought like old versions
of windows that you would be able to CTRL-ALT-DELETE on the login screen to type the username and password, but I can't get it to work!.
How do I login once I have put in users int he UserList key?. I can't get back into the regedit because I don't have any other admin accounts. :(
EDIT: Answer
If you would like to unhide the hidden Administrator account on Windows 7
Operating System , here's how you can do it:
1.Boot Win 7 DVD,go to command prompt and type regedit -it
2.Click on HKLM hive and next navigate File>>Load hive
Navigate to C:\Windows\System32\config folder and choose
SOFTWARE file load it and assign this hive any name for example REM_SOFTWARE
3.Open key:
HKEY_LOCAL_MACHINE\REM_SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList
and remove this account or better way remove the whole key:
HKEY_LOCAL_MACHINE\REM_SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts

File permissions - how to edit a user account

file permissions - how to edit a user account that is creating files with permissions that are not wanted anymore.
i understand how to reset permissions on files or folders, but i do not understand how to reset the permissions a user is "creating".
ie, each time this user creates a file, the file needs to be manually edited for its permissions. so i need to edit the user's settings, but i can't find where to do that.
this is a home office setup. we have two users with admin privileges. our imac is acting as a server of sorts - it holds common files that need to be edited by both users. the other user is typically working on shared files from a macbook over wifi.
osx 10.6.8
any help is greatly appreciated - thanks up front!
adam

Király wrote:
Changing the umask does not produce reliable results. Many apps, including Apple's own Finder, will override any custom umask setting and apply the OS X standard set of read and write for the creator, and read only for group and others. This is true even in Snow Leopard
I cannot argue with you, because I've never tried or tested it myself. However, this KB article
<http://support.apple.com/kb/HT2202>
states the opposite:
"In Mac OS X v10.5.3 and later, you can create the file /etc/launchd-user.conf with the contents "umask nnn". […]
This will set the user's umask for all applications they launch, such as Finder, TextEdit, or Final Cut Pro, and control the permissions set on new files created by any of these applications."

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to set the path variable on Windows ME?

I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.

Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.

How to set different icons for different windows which is seen in the top left corner?

Hi
How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
Is there any way to set icon by calling any dlls.
Thanks & Regards
Samuel J
[email protected]

Hi Sam,
no problem. See the attachment.
Mike
Attachments:
TestIcon_LV85.zip ‏44 KB

How to set the fix size jframe window

when I run the jframe ,the jframe window size is very small
1)how to set the fix size jframe window??
2)how to set the jframe cannot change the window size??
thx~~

1. You can set the size by calling JFrame's method setSize. There are two versions of this method: (1) setSize(int width, int height) and (2) setSize(Dimension d). Note, that when you use this method to set the frame size, you don't have to call JFrame's pack method.
2. JFrame has a method called setResizable(boolean resizable) which you can call with the argument false.
Without any ill intent, these questions are regarding something that is very easily answered by looking at the documentation for the JFrame class. I suggest to anyone working with swing to at least look briefly through the base classes they're extending before giving up. In my experience it is always more gratifying to figure things out on my own than asking someone. But please don't take this the wrong way, I respect people who seek out help in order to further their knowledge, instead of just giving up.

How to set iphone 5 bluetooth on windows 7 64 bit in notebook Toshiba

you can tell me how to set iphone 5 bluetooth on windows 7 64 bit in notebook toshiba qosmio f750

Unless you're trying to tether your Internet connection from the phone to the computer, you don't. That is not a feature of the iPhone.

How to set up user account in Windows 7/Premiere Elements 8.0/8.0.1?

Similar Messages

Maybe you are looking for