How to set up VLAN for DATA and VOIP on SRW248G4P switch?

Hi guys,
I am totally new and was given this task to complete. I really really need help.
We are using one network 192.168.1.0
Shared with data and voip.
CISCO C870, 5 switches LINKSYS SRW248G4P .
The email wrote:-
On the Linksys switch;
- create two different VLANs one for voice and one for data.
- put a firewall between the two VLANs (between voice and data) and only enable certain ports to flow to voice network (inbound tcp 8443 and ssh )
What should i do guys? I really need a dumb guide now.
I know its simple for you guys but i am not a smart IT fella. Whats the step by step?

If the switch is new or you have support on this, then you might try calling the support center. Here is a link:
https://www.myciscocommunity.com/community/smallbizsupport
On the right hand side you can find links to the support center.
Here is a link to the guide:
http://www.cisco.com/en/US/products/ps9967/prod_maintenance_guides_list.html
@ the bottom of this link you can find your switch model, you want the larger of the two. In this guide it shows you how to create a second vlan.
Will your router be the firewall between the two?
Kindest regards,
Andrew Lissitz

Similar Messages

How to set userlevel permission for GFS and NFS

hi
how to set userlevel permission for GFS and NFS?
regards

hi
http://www.redhat.com/docs/manuals/enterprise/
AND
http://en.tldp.org/
probably your best bet.
regards

How to set up icloud for family and one itunes account

I just got a new disk drive in my MACbook (now upgraded to Mountain Lion) so starting from scratch with itunes. With 4 IOS devices in the family and only one itunes account, I would like to figure out how to backup every device to itunes. I was able to save old itunes data on a jump drive, but did not have a Time Machine backup so I am literally starting from scratch and want to do it right.
I need to get data from IOS devices to itunes(via ICLOUD?) before I hook up device to "new" disk drive on MAC.
I am scared I will loose the data on the devices when I hook them up to the new Mac. Any help would be appreciated...
Can we each have separate Icloud IDs and still have one Apple ID we use for Itunes account?

"Can we each have separate Icloud IDs and still have one Apple ID we use for Itunes account?"
Yes, that's the suggested way of doing it.
As for starting from scratch - you need to decide which Apple ID to use for the mac. If each member of the family uses the mac, then set up a seperate account for each and use the Apple ID (the one used for iCloud) to sign into icloud. Use the common ID for itunes purchases. I'd suggest first syncing devices to icloud to get whatever data is important (contacts, events, ...) saved. When on the mac you connect to an iCloud account, the data (just synced from a device) will come down to the mac (for that account).
Tell us what "data" you want to get to the new Mac?

Help Please: how to set JDBC properties for data encryption in BC4J

Hello,
I am trying to implement JDBC Thin Driver Support for Data Encryption and Integrity.
With java.sql.Connection and java.util.Properties, one would do something like the following code:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Properties props = new Properties();
int level = AnoServices.REQUIRED;
props.put("oracle.net.encryption_client", Service.getLevelString(level));
props.put("oracle.net.encryption_types_client", "( RC4_40 )");
props.put("oracle.net.crypto_checksum_client",Service.getLevelString(level));
props.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:main", props);
But, how can we do this with BC4J objects? Can we set this properties via EnvInfoProvider class? Please help. Thank you very much in advance.
Zhirong

Hi,
Try adding the code in the PBO part of your custom program used for the custom screen which you have created and added inside the BADI.
Regards,
Harish

How to set filter criteria for month and year using in timestamp input field?

Hi,
I am using jdev 11.1.2.3,
I have one problem with Report generation,,,,,,I have one report table which is in the form of VO(query based) and i want to search this table as month and year basis
but in this table(query) that field having timestamp based value.. how to search with month name and year only.. Here i am using totally query base VO's for generating
reports........ Can any one guide me.
Thank You.

You can use a inputdate, which allows you to selecte a moth, year and a day. Once the selection is made you convert it to only allow moth and date like
        <af:inputDate label="Label 1" id="id1" autoSubmit="true" value="#{bindings.myMonthYear1.inputValue}">
          <f:convertDateTime pattern="MM/yyyy"/>
        </af:inputDate>
        <af:outputText value="Selected #{bindings.myMonthYear1.inputValue}" id="ot1" partialTriggers="id1"/>
then you have a string holding month and year only. This value you split into two variables you or pass it as a whole parameter to the query and split it there.
Another way is to add two static lovs one for month and one for year and use them to get to the filter values.
Timo

How to set mac shortcuts (for mac and windows OS)

i am having a bit of an issue.
i run windows 7 and mac os on the same computer on different hard drives in this computer. i also have a "mac" keyboard. i am not sure how this may be different from a "windows keyboard" but the point is i need to use this keyboard because it matches the one on my laptop which is a mac.
when i switch to windows on this machine i always end up deleting information because the CMD + X and CMD + V cut and paste shortcuts on Mac OS are not the same in windows. windows requires (currently) CTRL + X and CTRL + V. so when i got to cut and paste in windows CTRL + X (this is my habitual way of working) and then i run a CTRL + V i end up writing /over/ the text i selected with a "x" and i end up pasting /over/ the text i selected to paste over with a "v". this is because instead of running a cut and paste, this set of shortcuts in windows simply enters "x" and "y" respectively since the shortcut is not active.
does anyone know where i set these in windows OS and in mac OS?
also, does anyone know if it is possible to set how many UNDOS i can do in either of these OS's or to know how many i can in fact undo?
THANKS
long story background:
1. while i may move to a windows keyboard on the computer i am using (because the mac keyboards these days end up losing keys and they end up very wobbly) i cannot do this for the laptop machine so this may not make a lot of sense if i end up also running windows on the laptop which is my intention at some point.
2. CTRL + X is a very long stretch on the mac keyboard so rather than switching mac shortcuts to accommodate windows shortcuts i am thinking to switch windows shortcuts to mac ATM.
3. this is no small issue! i just went to copy and paste this text so i could save it for myself in order to explain to someone else and i ended up overwriting with a "c". if i had not thought fast and remembered to UNDO by hitting CTRL - X and not CMD - X i might have lost all my work.

long delay - no email of your post here
I also realise that you can use system preferences - Keyboard - modifier keys to make cmd = ctrl or vice versa
I'd surely ask/read elsewhere about altering windows, given the reach issue - but no qualms beyond confusion if switching/using other machines. You might soon find you switch layouts mentally, quite easily.
more to read:
Remap Copy and Paste shortcuts on a Mac - Super User
Remapping Keys and Buttons
Microsoft Windows Keyboard remapping
How to: Remap Apple Keyboard Command Keys to Control Keys

How to set RAW defaults for Contrast and Brightness?

When I open a RAW fole in PS Elements 8 the Brightness set to 50 and the contrast set to 25.
How to set these two values to 0 (zero) as a defaults when a RAW file opened for the first time (defaults).
Thank you for the help.
Leo

I think you can set presets in camera RAW (I'm at work now so I can't tell you the exact method), but setting contrast and brightness to zero gives you an ugly image, and you will most likely move the contrast up and the brightness up, so I'm not sure you are really gaining anything by having a default of 0 contrast and 0 brightness.
The defaults chosen by Adobe are reasonable.

How to set timer intervals for object + and a motion for entering stage

Hi, I am making a simple game but I have a couple problems/queries.
1) My game is a touch an object and you get a point game, currently the objects appear randomly over the screen, however I am trying to get it to slide into the screen similar to the Fruit Ninja game, but not limited to entering from one side, does anyone know how to set this?
2) As I mentioned above my objects appear randomly, I have set a timer when I change the timer from 800 to another number, it just makes all the objects on the screen last for 800 milliseconds all at the same time then disappear and appear somewhere else on the screen for another 800 milliseconds and it repeats, what I am trying to do is make them come at different intervals, for example:
Object 1 - constantly appears, so when the 800 millisecond is over, it comes back on a different part of the stage
Object 2 - I want it to appear every 5 seconds, so when the 800 millisecond is over it will come back on the stage in 5 seconds, but not instantly like Object 1
But I have no idea how to do this :/ anyone have the code needed for me to do this?
Sorry for the long questions, I only asked because I really am stuck, I have been trying to do this for over 2 weeks now.
Thanks very much.
My Code
[Code]
//importing tween classes
import fl.transitions.easing.*;
import fl.transitions.Tween;
import flash.utils.Timer;
//hiding the cursor
Mouse.hide();
var count:Number = 60;
var myTimer:Timer = new Timer(1000,count);
myTimer.addEventListener(TimerEvent.TIMER, countdown);
myTimer.start();
function countdown(event:TimerEvent):void {
myText_txt.text = String((count)-myTimer.currentCount);
if(myText_txt.text == "0"){
gotoAndStop(5)
//creating a new Star instance;
var star:Star = new Star();
var box:Box = new Box();
var bomb:Bomb = new Bomb();
//creating the timer
var timer:Timer = new Timer(800);
var timerbox:Timer = new Timer(850);
var timerbomb:Timer = new Timer(1000);
//we create variables for random X and Y positions
var randomX:Number;
var randomY:Number;
//variable for the alpha tween effect
var tween:Tween;
//we check if a star instance is already added to the stage
var starAdded:Boolean = false;
var boxAdded:Boolean = false;
var bombAdded:Boolean = false;
//we count the points
var points:int = 0;
//adding event handler to the timer;
timer.addEventListener(TimerEvent.TIMER, timerHandler);
//starting the timer;
timer.start();
function timerHandler(e:TimerEvent):void
          //first we need to remove the star from the stage if already added
          if (starAdded)
                    removeChild(star);
          if (boxAdded)
                    removeChild(box);
          if (bombAdded)
                    removeChild(bomb);
          //positioning the star on a random position
          randomX = Math.random() * 800;
          randomY = Math.random() * 1280;
          star.x = randomX;
          star.y = randomY;
          star.rotation = Math.random() * 360;
          box.x = Math.random() * stage.stageWidth;
          box.y = Math.random() * stage.stageHeight;
          box.rotation = Math.random() * 360;
          bomb.x = Math.random() * stage.stageWidth;
          bomb.y = Math.random() * stage.stageHeight;
          bomb.rotation = Math.random() * 360;
          //adding the star to the stage
          addChild(star);
          addChild(box);
          addChild(bomb);
          //changing our boolean value to true
          starAdded = true;
          boxAdded = true;
          bombAdded = true;
          //adding a mouse click handler to the star
          star.addEventListener(MouseEvent.CLICK, clickHandler);
          box.addEventListener(MouseEvent.CLICK, clickHandlerr);
          bomb.addEventListener(MouseEvent.CLICK, clickHandlerrr);
function clickHandlerr(e:Event):void
          //when we click/shoot a star we increment the points
          points += 5;
          //showing the result in the text field
          points_txt.text = points.toString();
                    if (boxAdded)
                    removeChild(box);
          boxAdded = false;
function clickHandler(e:Event):void
          //when we click/shoot a star we increment the points
          points++;
          //showing the result in the text field
          points_txt.text = points.toString();
          if (starAdded)
                    removeChild(star);
          starAdded = false;
function clickHandlerrr(e:Event):void
          gotoAndPlay(5);
[/Code]

The only thing that affects TopLink is the increment by, as increasing this is what allows TopLink to reduce the number of times it needs to go to the database to get additional numbers. Ie, an increment value of 1 means TopLink needs to go the database after each insert; an increment value of 50 allows it to insert 50 times before having to get a value from the sequence. The cache on the sequence object in the database affect the database access times. While it may improve the access times when the sequence number is obtained from the database, but I believe the network access to obtain the sequence is the greater concern and slow down for most applications. It all depends on the application usage and design though - an increment (and application cache) of 50 numbers seems to be the best default.
I cannot say what effect the cache vs nocache settings will have on your application, as it will depend on the database load. Only performance testing and tuning will truly be able to tell you whats best for your application.
Best Regards,
Chris

How to set up VLANs for Cisco SG500 - 28 switch

Hi,
First of all, this is my first post in here, I hope someone can help me, and please be patient since I am very little experienced.
OK, so let me explain you the scenarion that I am facing and hopefully someone will be able to help me.
We have a Cisco SG500 - 28 port gigabit switch in our workplace.
Our goal, is to create 3 VLANs and seperate the networks between different departements.
VLAN1 (which is the default VLAN in the switch) - will be used for IT department and the management.
VLAN100 - will be used for business .
VLAN200 - will be used for guests who need to connect to the internet through WiFi.
I have created VLAN100 and VLAN200, and VLAN1 is there by default.
I want to use port 13 for VLAN200 and to connect the Wifi access-point there.
The uplink is in port 25.
I would be glad if you could explain me the stuff first in a abstract more general level, and then we can look at the specific scenario that we have.
The Cisco SG500 - 28 gets internet from a Sophos UTM 9 router.
I will need to take care of inter-VLAN routing as well, and subnet, and DHCP
Thanks in advance,
Kindest regards,
D

Hello Desmond,
You have two different options:
Option 1:
Configure Sg500 switch as a Layer 2 switch and let the Sophos firewall do all the Layer 3 routing along with internet access. If you choose this option, then, you need to configure your uplink port as a trunk port and allow all 3 vlans to pass through. Also, you need to make sure that the Sophos device supports VLANs and trunking (or at least sub interfaces and create sub interfaces for each vlan). Also, all LAN devices will have the respective sub-interface/VLAN interface IP on the Sophos as their default gateway.
Option 2:
Configure SG500 switch as a Layer 3 device and configure intervlan routing to manage internal network traffic locally and send just the internet traffic to Sophos device.
You need to create Layer 3 interfaces for VLAN1, VLAN100, and VLAN200 on SG500 and then make those Layer 3 interfaces default gateway for respective VLAN.
You can configure the uplink port as an access port in one of the VLANs.
Make sure that the Sophos device has an IP on the same subnet as the VLAN you chose for the uplink port.
You also need to enter static routes on the Sophos device for the remaining two subnets on the SG500 (next hop address pointing to the IP address of the VLAN that the uplink port belongs to).
Also, on the SG500, you need to configure a default route, next hop address pointing to the Sophos interface IP address.
Hope this helps.
Nagaraja

How to set default permissions for files and folders

We have mac and windows computers on a network where we use Mac OSX Server 10.4 to share files. When files are created on windows computer, no problem, all users can read/write these files. However on our 2 macs (1 10.3 and 1 10.4), other users are blocked from using the files, only the owner has "read/write", group and others are "read only". As far as I can tell, file sharing is turned on ok in Workgroup Manager for the folders we share files from. How can we establish sharing for all users on our network?

Niel's suggestion is good. You might also try posting your question in the Tiger Server forums. I'm sure Tiger Server has several ways of dealing with this.

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

How to set up Qos for Microsoft Lyncs 2013 in cisco Switches and Router

Hi
as i am new to Qos part , please send the complete qos configuration command has to apply in my cisco 2960s switchs as well as 4506 chassis(L3 mode act as my router).
as i know from microsoft, DSCP 46 and 34 should give highest priory
please send the completed configuration for priorities this DSCP
thanks
Sujish

Hi,there,
The rule setting should be same as in Exchange 2010,you can configure it via outlook or OWA if you have full access permission. I also believe it should be something related to Repliation,would you please check the event log to see if the
AD and Exchange replication has completed.
In some cases, replication can take longer depending on how many AD sites and Exchange servers in the environment:
http://support.microsoft.com/kb/148381
http://support.microsoft.com/kb/158989
Hope these useful!
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

How to set the classpath for servlet and jsp???

i add C:\tomcat-5.0\common\lib\servlet-api+jsp-api to the class path from DOS prompt, as show below:
set CLASSPATH=%classpath%;C:\tomcat-5.0\common\lib\servlet-api.jar;C:\tomcat-5.0\common\lib\jsp-api.jar
then, i compile the servlet:
javac FirstServlet.java
no error
and i copy the .class file into C:\tomcat-5.0\webapps\servlets-examples\WEB-INF\classes
i set the JAVA_HOME enviroment variable as below:
set JAVA_HOME=C:\Program Files\Java\jdk1.5.0_08
i start the tomcat version 5.0 and run web browser and type http://localhost:8080/servlets-examples/servlet/FirstServlet
i get the error message:
HTTP Status 404 - /servlets-examples/servlet/FirstServlet
type Status report
message /servlets-examples/servlet/FirstServlet
description The requested resource (/servlets-examples/servlet/FirstServlet) is not available.
Apache Tomcat/5.0.30
Can anybody tell me how to solve the problem. Thanks a lot.

You will have to create the servlet mapping in the Web.xml file
<servlet>
             <servlet-name>FirstServlet</servlet-name>
             <servlet-class>FirstServlet</servlet-class>
    </servlet>
<servlet-mapping>
        <servlet-name>FirstServlet</servlet-name>
        <url-pattern>/servlet/FirstServlet</url-pattern>
    </servlet-mapping>

How I set character encoding for everypage and alway?

I use Thai window 874 open the page when I select some website it contain Thai then click open new tab it change to western windows 1252. It can not display Thai. I must set character encoding to Thai windows 874 everytime.

Try this:
Prefrences -> Content -> Fonts & Color -> Advanced
At the bottom, choose your Encoding.

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to set up VLAN for DATA and VOIP on SRW248G4P switch?

Similar Messages

Maybe you are looking for