How to set user/group in BIEE11G by the information stored in DB

Hi everyone,
I'm using OBIEE11.1.1.6,
I'd like to ask are there any way to achive this requirment:
I have stored user/group information in DB,the format as follow:
ID USER GROUP
1 A G1
2 B G2
so can we obtain the information from DB,then we set these information into BIEE security?
i.e we can access BIEE by the USER stored in DB. and the GROUP can be used in BIEE security.
thank you in advance!

Hi,
I am able to open the below link.
http://www.varanasisaichand.com/2011/09/external-table-authenticationorder-of.html
Follow the steps:
Order of Authentication:
The Oracle BI Server populates session variables using the initialization blocks in the desired order that are specified by the dependency rules defined in the initialization blocks.
If the server finds the session variable USER, it performs authentication against an LDAP server or an external database table, depending on the configuration of the initialization block with which the USER variable is associated.
Authentication against the identity store configured in Oracle WebLogic Server Administration Console occurs first, and if that fails, then initialization block authentication occurs.
If you configure your external table authentication as in OBIEE 10g when the session variable USER is associated to the initialization block and LDAP server fails to get the respective user then the user's will authenticate(Identify store) over database(table).
Dont forgot to create Catalog group as we do normally in 10g
In 11g Analytics - Administration- Security - Manage Catalog groups -- (+) to add new groups and set permissions to the catalog folders w.r.t groups/users.
Please refer this link you will get more information
http://www.orastudy.com/oradoc/selfstu/fusion/bi.1111/e10543/legacy.htm
Award points it is useful.
Thanks,
satya
Edited by: Satya Ranki Reddy on May 3, 2012 12:53 PM

Similar Messages

How to manageimported users, groups, and computers in the "Magic Triangle"

How do I manage imported users, groups, and computers? Server Preferences versus Workgroup Manager? I can import users and groups with the former but it offers limited configurable options. I can view all users. groups. and computers (from active directory) in the latter, but it does not designate which accounts have been imported.
I've got a magic triangle setup, with my users, groups and computers in Windows Active Directory, and my MacOS X snow leopard server setup as a directory master, abd bound to AD as well. I wish to apply group policy like settings to my Mac OS X leopard and snow leopard clients.
Here's a summary of my goals:
1. Time Machine Storage for mac users when they logon to Mac OS X computers.
2. Automount group shares located on the Mac OS X Server.
3. Redirect user desktop and document folders to user shares either on the Mac OS X server or my Windows file server.
4. Automount a custom folder (for each user) located either on the Mac OS X server or my Windows file server.
5. Setup Mac OS X server as a printer server with quotas for all mac and windows computer users.
Goal #1 appears to be working. "need help with the rest. Thanks

I'm not sure you want to import users to use the magic triangle properly. I think importing creates 'Augmented Records' - the user icons have blue dots.
The principle is this…
Bind the server to Active Directory (AD) & create an Open Directory master (OD). This can be done from Server Admin, in the OD section, via the change button.
Then you use Workgroup Manager, set the viewing directory (tiny little globe in top left) to use LDAP records on the server - LDAPv3/127.0.0.1. Authenticate (lock on right of toolbar) add a group, then switch to to its Members tab, click + Then change the user list to show the AD records & add the AD users to the OD group. It sounds weird & wrong, but it is how it works.
You are never modifying the AD records, just assigning a group to the users in OD. It's why the clients need to bind to AD & OD.
From there you can set the Managed prefs (MCX) for the members of the OD group. It also helps to add a guest computer account to OD to assign computer prefs based on the macs that bind to the server - it's in the File menu when you select the computes list in OD.
I hope that's clear, not sure I can help with the other tasks, but they tend to fall into place once you have the complex start in place.

How to set up Group Policy without any server installed

How to set up Group Policy on Win8 without any server installed?
I have set up 50 users on LAN and want to push softwares via one common point. From google I found to deploy Software using Group Policy. But then Group Policy occurs in Servers and I don't have any server set up.

Hello,
a Domain requires at least one Windows server OS machine which has Active Directory installed.
As previous already mentioned from SenneVL this also requires that computers are added to the domain and that you create user accounts in Active Directory users and computers which stores the account information in the Active directory database.
In your case with single computers each machine has its own database(SAM) which stores passwords etc. this is different in a domain.
Each computer has a local policy which will be overwritten from centrally managed policies from the domain.
"The common point would be my PC (Admin PC) ."
This machine can not be used for your needs with software installation for 50 computers.
"How To Use the Group Policy Editor to Manage Local Computer Policy."
This is about the local machine and you cannot manage them for other computers from your Admin PC.
"DOMAIN part: By default Microsoft takes everyone on Workgroup. Is that not a default DOMAIN? or should I make one lets say "ABC" on every PC ?"
NO, this is NOT a domain.
http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to create user groups in SAP

Hello Gurus,
Can anyone let me know how to create user groups in SAP-HR Module and who will be creating the user groups.
plz provide me the steps.

Hi Stephanie,
IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
Please refer the below links:
http://scn.sap.com/thread/1653026
http://scn.sap.com/thread/1682721
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
Thanks,
Madhav.

How to set user specific Layout for executing IW38/IW39 report.

Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.

Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N

How to find user group from tcode

Hi Experts,
I have custom tcode from this i found report name as AQIDSYSTQV000001SD_RR_03======
I am unable to find Queryname in SQ01 from this.
When i saw some of the forums i understood that IDSYST is the user group for my query but i am unable to trace such user group in SQ01.
Please guide me how to find user group for my report
Thanks&Regards,
narasimha.

Hi ,
I found in table AQGQSTRUC but i didnt find the specified query
Previously 401 client is there but at present it is not there .How can you justify it that it is 401 client.
As 401 client data is moved to someother client is it the problem why i am not able to find query??
Thanks&Regards,
narasimha.
Edited by: narasimha02 on Dec 7, 2010 9:54 AM

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

How to set user quotas on a certain filesystem

Hi
It may be simple and easy question but I'm really new to this
I need to know how to set user quotas on a certain file system in details
I know it can be done easily in one step in Solaris ZFS
but how is it done in Linux ?
Thanks in Advance :)

See also:
How to set user quotas on a certain filesystem

How to set user friendly URL in ApEx with OHS 11g ?

Hi,
How to set user friendly URL in ApEx with OHS 11g ?
I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
I dont want to use iFrame solution. Please suggest any other method to acheive the same.
Thanks & Regards,
Ranu

Hi all
Iam using apex 4.0 -oracle 11g with OHS on linux os
I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
What are the settings i need to do.
If any one knows please share the solution with me
Thanks & In advance

How to set user preferred timezone in OBIEE for all objects.

How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

How to set a group by clause in ODI interface?

How to set a group by clause in ODI interface?

In ODI, group by method will be triggered automatically when any one of your mapping contains aggregate functions.
Thanks,
Saravanan Rajavel

How to Set User Status of Sales Order at item level.

How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
Thanx,
Srini
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

Mathew,
Here is a document that should help you get started on enhancing 2LIS_11*
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
Good luck!

How to create user group for EIS (Executive Information System) KCBA

Dear Experts,
How to create user group for EIS (Executive Information System)
TCode KCBA
Regards
Saurabh

Hi ,
Check the below link ,hope it will give some inputs for creating groups.
http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
Regards
udayakumar.k

Warning! task_eval_init(): unable to set User/Group baseDN

Hi,
I have installed Directory server on Unix platform.
Installation went successful. While doing the installation, I have given the userid to run the server as "admxxx" and group as "www".
After the installation, the server started properly but with a warning message that "warning: daemon is running as super-user". And I was able to open the console and do whatever I wanted.
We have created 3 more directory server instances and we imported an LDIF file into one of the instances successfully.
Now the problem is, whenever we start the admin server, we are getting the following message.
bash-2.03# ./start-admin
Info: Cache expiration set to 600 seconds
Warning! task_eval_init(): unable to set User/Group baseDN
Netscape-Administrator/4.2 B2002.057.2313
startup: listening to http://servername, port 6061 as root
warning: daemon is running as super-user
Can any one tell why I am getting the message Warning! task_eval_init(): unable to set User/Group baseDN ?
This is very urgent. We have configured this LDAP to SiteMinder server.
Thanks in Advance,
Murthy

zhangping,
I don't recognize your error. But are you using ldap for logging into SunMC ? This is not possible.

How to set a specific starting time for the falling snow code snippet

Hi everyone
I want to use the falling snow code snipet but I don't want it it to start as soon the movie starts.
So how to set a specific time to start the falling snow?
Thanks
Patricia

put the code (that's not in a function body and excluding variable declarations and import statements) in a function body and call it using the timer class.

How to set user/group in BIEE11G by the information stored in DB

Similar Messages

Maybe you are looking for