How to set user settings insap

how to set default settings

n SAP Easy Access screen System -->User Profile -->Own Data. In which, in the defaults tab you can change the change the formats for the user and save the settings
actually all time's we dont have authorizations to change those..
and SU3 tcode is alos correct
Regard points if useful
Regards
sas

Similar Messages

  • How to set user friendly URL in ApEx with OHS 11g ?

    Hi,
    How to set user friendly URL in ApEx with OHS 11g ?
    I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
    I dont want to use iFrame solution. Please suggest any other method to acheive the same.
    Thanks & Regards,
    Ranu

    Hi all
    Iam using apex 4.0 -oracle 11g with OHS on linux os
    I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
    What are the settings i need to do.
    If any one knows please share the solution with me
    Thanks & In advance

  • How to set user specific Layout for executing IW38/IW39  report.

    Dear Experts,
    We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
    After changing the setting all are getting same layout.
    Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
    Thanks in advance.

    Create Variant using SHD0 and with Group and assign to particular user's
    Here is the steps
    Creating a Variant Group
    1. Open transaction SHD0, enter the transaction code, and press enter.
    2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
    3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
    Assigning Users
    Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
    1. Return to the Standard Variants tab page, Variant Groups sub tab page.
    2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
    3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
    You can use this procedure of user assignment for all other users that you want to add to the variant group
    Hope this helps.
    Thanks
    S.N

  • How to set gprs settings in i phone 4

    Dear Sir
    How to set GPRS settings in i phone 4 pls send me the details
    Thanks

    See pages 11 and 135 of the iPhone User Manual:
    iPhone User Guide (For iOS 6.1 Software)

  • How to set user quotas on a certain filesystem

    Hi
    It may be simple and easy question but I'm really new to this
    I need to know how to set user quotas on a certain file system in details
    I know it can be done easily in one step in Solaris ZFS
    but how is it done in Linux ?
    Thanks in Advance :)

    See also:
    How to set user quotas on a certain filesystem

  • How to set user preferred timezone in OBIEE for all objects.

    How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • How to Set User Status of Sales Order at item level.

    How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
    Thanx,
    Srini
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

    Mathew,
    Here is a document that should help you get started on enhancing 2LIS_11*
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
    Good luck!

  • Firefox 4 multi user environment in linux: How to set global settings?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/826921]</blockquote><br>
    Hi,
    We used to be able to change settings in all.js file in FF 3.x.x platform, for changing settings like, proxy, authentication, etc. We installed FF 4.0.1 in linux, but, I can't find the all.js file to change any of the global settings in FF 4.0.1.
    Could you please point me how to changeglobal settings in FF 4.x version?
    thanks in advance.

    Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
    connections, and the controls to make sure only one user uses a particular
    connection at any one time. If you want to have different DBMS users, you can
    have a separate pool for each DBMS user, which may contain as many or few
    connections as you want. Some applications has a pool for the accounting
    applications, and another for the sales applications etc. Some do have a
    separate pool for john, jane, joe etc, each with one connection. Pools
    can be created and destroyed dynamically using the dynamic pool API.
    Joe
    softstar wrote:
    >
    Hi all,
    I need to know how to set Multi User Environment in the weblogic 5.1
    properties file..
    Here my question is..:)
    1) I have a database with multiple users and having different privileges
    for the users.. and i need to use all the privileges when user aceess
    the database through weblogic server connectionPool.
    2)According to the user privileges i need access the database tables
    content and gives the frontEnd(jsp).
    3)How to modify dynamically weblogic.properties file in the weblogic
    5.1.
    If anybody having idea reg. this issues pl...help me..
    Thanks in advance
    Chandu([email protected],[email protected])

  • How to disabled 'user settings' in ALV by right clicking

    Hi,
    How to disable the 'user setting' context menu and corresponding popup after right clicking in the ALV.
    I already tried parameter wddisableuserpersonalization = X but still I can do a right click and go to user settings.
    Hope you can provide the right solution/method etc.
    Thanks, John

    Hi,
    In my opinion this has nothing to do with auth settings... Has everything been transported cleanly?
    You should double check the settings on your Acceptance machine, especially considering WD_GLOBAL_SETTING. If User-Personalization is allowed here, it will overwrite everything else.
    Maybe also check WD_ANALYZE_CONFIG_USER on Acceptance machine and delete all personalizations for the user you are testing with. I once successfully messed up my Personalization with conflicting entries there...
    best regards, Lukas

  • EREC - How to disable user settings in external job board e recruitment

    Hi All,
    Is there an option to disable the user settings for External Job Boards ? The user settings where candidate can save default keywork search etc (which unfortunately stays for other candidates unless the default value is discarded.)
    Thanks
    Suman

    Hi Suman,
    Please check the following link on how to set up the WDDISABLEUSERPERSONALIZATION parameter:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/7b/fb57412df8091de10000000a155106/frameset.htm
    and then set up the parameter for the standard hrrcf_a_unreg_job_search and try to run your WD application.
    Hope it helps,
    Kind Regards
    Christine

  • How to set User-field in Plan order

    Hi
    could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
    thanks
    henry

    Hi,
    Actually these user defind fields are used/assigned in the routing.
    Initially u have to define your own user defind profile through OPEC transaction.
    Assign this profile in the routing.
    So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
    Then after executing the particular operation some amount of silver chips or silver scrap will generated .
    To keep chip/scrap qty operation and date which user defind is used.
    Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
    Regards
    Vijay

  • How to set user privilege

    i want to NEW USER excute procedure which
    is other schema!
    i want not to use prefix for execute procedure!
    how to set NEW user privilege?
    null

    Hi
    I create a user in a Database using SQL developer,
    so it is a Database User.
    Now I want to give this user access to some table in
    read , write mode and just let it to read some other
    tables.
    how i can do this ? SQL*Developer currently doesn't support security admininstration through the GUI, but you can use sqlworksheet to issue grant statements.
    grant select on mytable to otheruser1;
    grant select,insert,update,delete on mytable to otheruser2;
    It looks like that when we create a use SQL developer
    create a schema for that user , how i can make more
    users without creating Schema for each of them ?
    A schema is the collection of objects owned by a user. A user can exist without owning any objects.
    If you are using XE, you might be better off using the XE GUI to manage this.

  • How to transfer user settings from one account to another (on the same Mac)

    I'd like to create separate user accounts for "work" and "play" (so that I can do things like have separate address books, etc...). However, I already have LOTS of personalized settings (trackpad behavior, login items, etc) that I'd like to keep the same between the two accounts.
    Is there a way to transfer all of the user settings from one account to another?

    You'll need to copy your /Home/Library folder. Make sure you back up first before doing the following. Log out of both your Work and Play accounts. Log in to a third account with administrator privileges. Assuming you are copying from the account called "work" to the account called "play", enter the following in Terminal:
    sudo rm -rf ~play/Library (this deletes Play's Library folder.)
    sudo cp -R ~work/Library ~play/Library (this copies Work's Library folder to Play's folder.)
    sudo chown -R play ~play/Library (this fixes permissions of Play's new Library folder.)

  • How to set user command in module pool program

    hello expert,
    like in report: PARAMETERS: RB_SING RADIOBUTTON GROUP RAD3 DEFAULT 'X' USER-COMMAND C1.
    in module pool program, hw to set user-command in screen.
    srinivas

    PBO.
    Call subscreen <SUBSCREEN NAME> Including sy-repid(PROGRAM NAME) G_DYNNR(SCREEN NUMBER'.
    PAI
    module user_command.
    Call subscreen <subscreen name>
    Module user_command.
    case sy-ucomm.
    when 'BUT1'.
    g_dynnr = 200.
    when 'BUT2'.
    g_dynnr = 300.
    Endcase.
    end module
    REPORT demo_dynpro_tabstrip_server.
    CONTROLS mytabstrip TYPE TABSTRIP.
    DATA: ok_code TYPE sy-ucomm,
    save_ok TYPE sy-ucomm.
    DATA number TYPE sy-dynnr.
    mytabstrip-activetab = 'PUSH2'.
    number = '0120'.
    CALL SCREEN 100.
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'SCREEN_100'.
    ENDMODULE.
    MODULE cancel INPUT.
    LEAVE PROGRAM.
    ENDMODULE.
    MODULE user_command INPUT.
    save_ok = ok_code.
    CLEAR ok_code.
    IF save_ok = 'OK'.
    MESSAGE i888(sabapdocu) WITH 'MYTABSTRIP-ACTIVETAB ='
    mytabstrip-activetab.
    ELSE.
    mytabstrip-activetab = save_ok.
    CASE save_ok.
    WHEN 'PUSH1'.
    number = '0110'.
    WHEN 'PUSH2'.
    number = '0120'.
    WHEN 'PUSH3'.
    number = '0130'.
    ENDCASE.
    ENDIF.
    ENDMODULE.
    flow logic of the screen 100
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    CALL SUBSCREEN SUB.
    MODULE USER_COMMAND.
    flow logic of the screen 110
    PROCESS BEFORE OUTPUT.
    PROCESS AFTER INPUT.
    flow logic of the screen 120
    PROCESS BEFORE OUTPUT.
    PROCESS AFTER INPUT.
    flow logic of the screen 130
    PROCESS BEFORE OUTPUT.
    PROCESS AFTER INPUT.
    REGARDS
    VASU

  • How o set envoirmental settings of OAS 10g (10.1.2.0.2)?

    Hi,
    I am first time installing the OAS 10g (having OSS and OID) on OEL 5.5 x86 , and after that I will go to integrate it with EBS (12.0.6) with database 10g.
    I have 3 machines:
    1: One for oracle Application server (EBS r12 (12.0.6)) ----> Red Hat Linux 4.6 x86 ---------> Install and functioning.
    2: Second for oracle database server (oracle 10g (10.2.0.3)) ---> Red Hat Linux 4.6 x86 ---------> Install and functioning.
    3: Third for OAS 10g(10.1.2.0.2) with "OAS Infrastructure" and "OAS Middle Tier" (On same machine with different ORACLE_HOME). ------> OEL 5.5 x86 ------> Not Installed .
    So, I had installed the "OAS Infrastructure" , but not install the "OAS Middle Tier",, and I restart the OS , after that my envoirnment is not loaded and I cannot startup the OAS services.
    Please guide me about my above plan is correct or any helpful suggessions from ur side, I will appretiate in advance?
    Please also guide me how to set the envoirnmental setting for OAS?
    Thanks.

    export STAGE_PATH=............
    export INFRA_INSTANCE=............
    export BIF_INSTANCE=................
    export ORACLE_BASE=/suo1/oracle/.....
    export ORACLE_HOME=/su01oracle/infra.......
    export ORACLE_SID=iasdb
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/local/lib
    export DISPLAY=............
    PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/Apache/Apache/bin
    PATH=$PATH:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin
    export PATH

Maybe you are looking for