How to set user specific Layout for executing IW38/IW39 report.
Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.
Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N
Similar Messages
-
How to export user specific layouts to another user ID's
Dear Experts,
We saved some ALV layouts as a User Specific, now I want to export those layout to another user ID,
for example in User ID “X” I saved some ALV layouts as user specific now I want to move those ALV layouts to another user ID “Y” , but my “X” user Id is blocked how to export those layouts to another user ID, Kindly Help me out.
Thanks & regards,
AIMHi
You have to create a NOT User specific layout. This will be available for all the users depending on your security authorization. You cannot move a user specific layout from one id to another
Regards
Sanil Bhandari -
Hi Gurus,
User has created a variant for KSB1 report and its saved as user specific variant automatically. Now he want to change this as global in order to access for other users but user specific check box not able to deactivate as its greyed out(not modifialbe). Attached screen shot for clarity on the issue. Please share your inputs on from where this tab is controlling?
Thanks in AdvanceHi Jyothi,
You can create a new standard layout with name starting with /. If user specific check box is grayed out and selected by default, then that user may not have proper authorization to create standard ALV layouts. Please ask your BASIS team to give required authorization.
Thanks,
V V -
How to set user parameters in transaction MD61 through a report?
Hi,
I want to set default values for 'Requirement Type' in user parameters of transaction MD61 through a report. Please help.
Thanks in Advance.Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N -
How to set a specific time for measurement file?
Hello,
I am trying to get a sampling from a milling machine via RS-232 as
shown in the VI (milling machine). This communication is set at
4800 baud rate; however I would like to save this data to file with a
specific time (let says every second).
Can anyone please tell me how I can deal with this?
kind regards,
tao-ncl
Attachments:
Milling Machine.llb 401 KBHi JamesC
This is a file that I got from that code. As you can see, in this file
a number of sampling is relate to an execution time of the machine.
However I need to do a sampling with a specific time, like every second.
Regards,
taoncl
Attachments:
first test.xls 110 KB -
How to set the (specific) color for a Chart Series in a Flash Diagramm
Hello all,
I wonder how I can set the color (of a bar) for a Chart Series in a Flash Diagramm.
So far I found now set-screw for this.
Can someone give me a hint please.
Thanks in advance.
AndreHi,
On the Chart Attributes page for the region, change the "Color Scheme" setting to Custom. Then, in the "Custom Colors" setting, enter the colours you want for all series, separated by a comma. For example:
red,yellow,greenAndy -
How to set the default value for page item in report
Hi Gurus
I currently i have company name as page item in one of my report screen ,but it is displaying the value for company name in its drop down column ,but i want to make it "*ALL* as default after the query result ",this is user requirement ,please share ,how can i make it ,is it possible ??,thanx in advance
thanx
PratapHi,
I don't think this is possible. You can of course use a parameter to select the page item and default the parameter but then the user will have to rerun the report to see other pages items.
Rod West -
Copy user-specific layout to another user ID
Does anybody know how to copy "user layout" information
from current user ID to new user ID?
At the end of every year, my company needs to give new user ID to all users
due to security reason. For example, User ID for Y2008 is "user2008",
and provide new user ID which is "user2009" for Y2009.
The user is the same employee.
Since he is the same person, of course he wish to keep using
his user-specific layout for Y2009 continuously.
So, I copied current user ID and create new user ID from SU01.
Then, I found out that "user layout(user-specific layout)" information on FB03
was NOT copied to new user ID.Hello,
There is no need need to create a new user year.
You can extend the validity of the same user id year by year. For example, you have created a user "TRAINEE01", initially when you have created you give the validity period from 01.01.2008 to 31.12.2008. Once the year is being closed, extend the validity from 01.01.2009 to 31.12.2009. This way you can avoid lot of maintenance cost as there are no redundancy of user IDs.
There are many settings are user specific. In case if you create a new ID, the problem is that again he has to change all his / her settings. It would really cumbersome and they may not be knowing what changes made in the previous ID, as the system administrator might has stopped access to the old ID.
Regards,
Ravi -
How to set user preferred timezone in OBIEE for all objects.
How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences
Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go -
Changing Default Layout Setting - User-specific
Dear Gurus,
This is related to general ALV Layout setting. When we choose Select Layout -> Choose Layout, the default layout setting will show All, is there any way by which we can change this to User-specific Layouts by default? (may be through some parameter id?).
Many Thanks!
Best Regards,
Sree.Hi ,
Can you explain me your requirement in detail.
Regards,
Rohan. -
How to set a specific starting time for the falling snow code snippet
Hi everyone
I want to use the falling snow code snipet but I don't want it it to start as soon the movie starts.
So how to set a specific time to start the falling snow?
Thanks
Patriciaput the code (that's not in a function body and excluding variable declarations and import statements) in a function body and call it using the timer class.
-
How to set up Airport Extreme for 11ac and 11n?
I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
MichaelHow to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results. -
Hi
We are assign the specific lay out for specific user the system is not allowing to save the data the following is the error description
User-specific layouts must start with a letter (A-Z)
kinly let me know if this is the authorisation issue
the functional consultant can able to do the setting
please provide the solution
thanks in advance
Regards,
Jyothihi
thanks for solution
i am followed the same
but still the problem is same
exactly what iam doing is
once we entered the screen there is some standard layout is picking the system that is 0SAP
Than iam selecting the choose button and selectin gthe layout 3SAP
than iam saving the data
system ids giving the pop up and there iam selecting the reqired layout and selecting the check mark user specific and saving the data . removed the even after 3 in 3asp
but still the problem is same
kindly explian me the procedure if iam wrong
thanks in advance -
User specific layout in product costing
Hi gurus,
I run report KKBC_ORD and set up specific layout.
I cannot save the same as global layout. Just as user-specific.Hello there,
There is an indicator in the product cost controlling -> information
system -> control parameters (OKN0) which allows shared layouts for
PCP reports. Please check this IMG transaction to see if 'layout visibil
ity is shared. If it is shared, then you should be able to save a
variant either for one user or all users.
br, Guido -
How to set up automatic payment for the purchase order
Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advanceEither you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text
Maybe you are looking for
-
Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because noth
-
How do i back up my iPhone to iTunes without having to type in the password on my phone?
Basically i have a broken iPhone screen and the touch doesn't work, Therefore i cannot put in the password on my phone to allow iTunes to back it up on my Mac OR my Windows laptop so i don't loose everything on there, Is there a way to bypass this so
-
Will my subscription be renewed?
-
I do not know if this belongs here. Has anybody experience regarding Mac OS X 10.5.5/10.5.6 & Entourage. Every time we received an email with a pdf attachment that are created from any adobe products. The Entourage will completely freezes and hangs I
-
Once Mac address book synched from iphone and contacts deleted they won't resynch back
I have a problem and have spent hours researching but to no avail 1. I got a new iphone 4S and put in my mail info from yahoo, gmail and low and behold I had a contact list now in my phone. I thought, "I just love Apple!" 2. I spent all afternoon on