How to set userlevel permission for GFS and NFS

hi
how to set userlevel permission for GFS and NFS?
regards

hi
http://www.redhat.com/docs/manuals/enterprise/
AND
http://en.tldp.org/
probably your best bet.
regards

Similar Messages

How to set up icloud for family and one itunes account

I just got a new disk drive in my MACbook (now upgraded to Mountain Lion) so starting from scratch with itunes. With 4 IOS devices in the family and only one itunes account, I would like to figure out how to backup every device to itunes. I was able to save old itunes data on a jump drive, but did not have a Time Machine backup so I am literally starting from scratch and want to do it right.
I need to get data from IOS devices to itunes(via ICLOUD?) before I hook up device to "new" disk drive on MAC.
I am scared I will loose the data on the devices when I hook them up to the new Mac. Any help would be appreciated...
Can we each have separate Icloud IDs and still have one Apple ID we use for Itunes account?

"Can we each have separate Icloud IDs and still have one Apple ID we use for Itunes account?"
Yes, that's the suggested way of doing it.
As for starting from scratch - you need to decide which Apple ID to use for the mac. If each member of the family uses the mac, then set up a seperate account for each and use the Apple ID (the one used for iCloud) to sign into icloud. Use the common ID for itunes purchases. I'd suggest first syncing devices to icloud to get whatever data is important (contacts, events, ...) saved. When on the mac you connect to an iCloud account, the data (just synced from a device) will come down to the mac (for that account).
Tell us what "data" you want to get to the new Mac?

How to set mac shortcuts (for mac and windows OS)

i am having a bit of an issue.
i run windows 7 and mac os on the same computer on different hard drives in this computer. i also have a "mac" keyboard. i am not sure how this may be different from a "windows keyboard" but the point is i need to use this keyboard because it matches the one on my laptop which is a mac.
when i switch to windows on this machine i always end up deleting information because the CMD + X and CMD + V cut and paste shortcuts on Mac OS are not the same in windows. windows requires (currently) CTRL + X and CTRL + V. so when i got to cut and paste in windows CTRL + X (this is my habitual way of working) and then i run a CTRL + V i end up writing /over/ the text i selected with a "x" and i end up pasting /over/ the text i selected to paste over with a "v". this is because instead of running a cut and paste, this set of shortcuts in windows simply enters "x" and "y" respectively since the shortcut is not active.
does anyone know where i set these in windows OS and in mac OS?
also, does anyone know if it is possible to set how many UNDOS i can do in either of these OS's or to know how many i can in fact undo?
THANKS
long story background:
1. while i may move to a windows keyboard on the computer i am using (because the mac keyboards these days end up losing keys and they end up very wobbly) i cannot do this for the laptop machine so this may not make a lot of sense if i end up also running windows on the laptop which is my intention at some point.
2. CTRL + X is a very long stretch on the mac keyboard so rather than switching mac shortcuts to accommodate windows shortcuts i am thinking to switch windows shortcuts to mac ATM.
3. this is no small issue! i just went to copy and paste this text so i could save it for myself in order to explain to someone else and i ended up overwriting with a "c". if i had not thought fast and remembered to UNDO by hitting CTRL - X and not CMD - X i might have lost all my work.

long delay - no email of your post here
I also realise that you can use system preferences - Keyboard - modifier keys to make cmd = ctrl or vice versa
I'd surely ask/read elsewhere about altering windows, given the reach issue - but no qualms beyond confusion if switching/using other machines. You might soon find you switch layouts mentally, quite easily.
more to read:
Remap Copy and Paste shortcuts on a Mac - Super User
Remapping Keys and Buttons
Microsoft Windows Keyboard remapping
How to: Remap Apple Keyboard Command Keys to Control Keys

How to set RAW defaults for Contrast and Brightness?

When I open a RAW fole in PS Elements 8 the Brightness set to 50 and the contrast set to 25.
How to set these two values to 0 (zero) as a defaults when a RAW file opened for the first time (defaults).
Thank you for the help.
Leo

I think you can set presets in camera RAW (I'm at work now so I can't tell you the exact method), but setting contrast and brightness to zero gives you an ugly image, and you will most likely move the contrast up and the brightness up, so I'm not sure you are really gaining anything by having a default of 0 contrast and 0 brightness.
The defaults chosen by Adobe are reasonable.

How to set timer intervals for object + and a motion for entering stage

Hi, I am making a simple game but I have a couple problems/queries.
1) My game is a touch an object and you get a point game, currently the objects appear randomly over the screen, however I am trying to get it to slide into the screen similar to the Fruit Ninja game, but not limited to entering from one side, does anyone know how to set this?
2) As I mentioned above my objects appear randomly, I have set a timer when I change the timer from 800 to another number, it just makes all the objects on the screen last for 800 milliseconds all at the same time then disappear and appear somewhere else on the screen for another 800 milliseconds and it repeats, what I am trying to do is make them come at different intervals, for example:
Object 1 - constantly appears, so when the 800 millisecond is over, it comes back on a different part of the stage
Object 2 - I want it to appear every 5 seconds, so when the 800 millisecond is over it will come back on the stage in 5 seconds, but not instantly like Object 1
But I have no idea how to do this :/ anyone have the code needed for me to do this?
Sorry for the long questions, I only asked because I really am stuck, I have been trying to do this for over 2 weeks now.
Thanks very much.
My Code
[Code]
//importing tween classes
import fl.transitions.easing.*;
import fl.transitions.Tween;
import flash.utils.Timer;
//hiding the cursor
Mouse.hide();
var count:Number = 60;
var myTimer:Timer = new Timer(1000,count);
myTimer.addEventListener(TimerEvent.TIMER, countdown);
myTimer.start();
function countdown(event:TimerEvent):void {
myText_txt.text = String((count)-myTimer.currentCount);
if(myText_txt.text == "0"){
gotoAndStop(5)
//creating a new Star instance;
var star:Star = new Star();
var box:Box = new Box();
var bomb:Bomb = new Bomb();
//creating the timer
var timer:Timer = new Timer(800);
var timerbox:Timer = new Timer(850);
var timerbomb:Timer = new Timer(1000);
//we create variables for random X and Y positions
var randomX:Number;
var randomY:Number;
//variable for the alpha tween effect
var tween:Tween;
//we check if a star instance is already added to the stage
var starAdded:Boolean = false;
var boxAdded:Boolean = false;
var bombAdded:Boolean = false;
//we count the points
var points:int = 0;
//adding event handler to the timer;
timer.addEventListener(TimerEvent.TIMER, timerHandler);
//starting the timer;
timer.start();
function timerHandler(e:TimerEvent):void
          //first we need to remove the star from the stage if already added
          if (starAdded)
                    removeChild(star);
          if (boxAdded)
                    removeChild(box);
          if (bombAdded)
                    removeChild(bomb);
          //positioning the star on a random position
          randomX = Math.random() * 800;
          randomY = Math.random() * 1280;
          star.x = randomX;
          star.y = randomY;
          star.rotation = Math.random() * 360;
          box.x = Math.random() * stage.stageWidth;
          box.y = Math.random() * stage.stageHeight;
          box.rotation = Math.random() * 360;
          bomb.x = Math.random() * stage.stageWidth;
          bomb.y = Math.random() * stage.stageHeight;
          bomb.rotation = Math.random() * 360;
          //adding the star to the stage
          addChild(star);
          addChild(box);
          addChild(bomb);
          //changing our boolean value to true
          starAdded = true;
          boxAdded = true;
          bombAdded = true;
          //adding a mouse click handler to the star
          star.addEventListener(MouseEvent.CLICK, clickHandler);
          box.addEventListener(MouseEvent.CLICK, clickHandlerr);
          bomb.addEventListener(MouseEvent.CLICK, clickHandlerrr);
function clickHandlerr(e:Event):void
          //when we click/shoot a star we increment the points
          points += 5;
          //showing the result in the text field
          points_txt.text = points.toString();
                    if (boxAdded)
                    removeChild(box);
          boxAdded = false;
function clickHandler(e:Event):void
          //when we click/shoot a star we increment the points
          points++;
          //showing the result in the text field
          points_txt.text = points.toString();
          if (starAdded)
                    removeChild(star);
          starAdded = false;
function clickHandlerrr(e:Event):void
          gotoAndPlay(5);
[/Code]

The only thing that affects TopLink is the increment by, as increasing this is what allows TopLink to reduce the number of times it needs to go to the database to get additional numbers. Ie, an increment value of 1 means TopLink needs to go the database after each insert; an increment value of 50 allows it to insert 50 times before having to get a value from the sequence. The cache on the sequence object in the database affect the database access times. While it may improve the access times when the sequence number is obtained from the database, but I believe the network access to obtain the sequence is the greater concern and slow down for most applications. It all depends on the application usage and design though - an increment (and application cache) of 50 numbers seems to be the best default.
I cannot say what effect the cache vs nocache settings will have on your application, as it will depend on the database load. Only performance testing and tuning will truly be able to tell you whats best for your application.
Best Regards,
Chris

How to set up VLAN for DATA and VOIP on SRW248G4P switch?

Hi guys,
I am totally new and was given this task to complete. I really really need help.
We are using one network 192.168.1.0
Shared with data and voip.
CISCO C870, 5 switches LINKSYS SRW248G4P .
The email wrote:-
On the Linksys switch;
- create two different VLANs one for voice and one for data.
- put a firewall between the two VLANs (between voice and data) and only enable certain ports to flow to voice network (inbound tcp 8443 and ssh )
What should i do guys? I really need a dumb guide now.
I know its simple for you guys but i am not a smart IT fella. Whats the step by step?

If the switch is new or you have support on this, then you might try calling the support center. Here is a link:
https://www.myciscocommunity.com/community/smallbizsupport
On the right hand side you can find links to the support center.
Here is a link to the guide:
http://www.cisco.com/en/US/products/ps9967/prod_maintenance_guides_list.html
@ the bottom of this link you can find your switch model, you want the larger of the two. In this guide it shows you how to create a second vlan.
Will your router be the firewall between the two?
Kindest regards,
Andrew Lissitz

How to set filter criteria for month and year using in timestamp input field?

Hi,
I am using jdev 11.1.2.3,
I have one problem with Report generation,,,,,,I have one report table which is in the form of VO(query based) and i want to search this table as month and year basis
but in this table(query) that field having timestamp based value.. how to search with month name and year only.. Here i am using totally query base VO's for generating
reports........ Can any one guide me.
Thank You.

You can use a inputdate, which allows you to selecte a moth, year and a day. Once the selection is made you convert it to only allow moth and date like
        <af:inputDate label="Label 1" id="id1" autoSubmit="true" value="#{bindings.myMonthYear1.inputValue}">
          <f:convertDateTime pattern="MM/yyyy"/>
        </af:inputDate>
        <af:outputText value="Selected #{bindings.myMonthYear1.inputValue}" id="ot1" partialTriggers="id1"/>
then you have a string holding month and year only. This value you split into two variables you or pass it as a whole parameter to the query and split it there.
Another way is to add two static lovs one for month and one for year and use them to get to the filter values.
Timo

How to set default permissions for files and folders

We have mac and windows computers on a network where we use Mac OSX Server 10.4 to share files. When files are created on windows computer, no problem, all users can read/write these files. However on our 2 macs (1 10.3 and 1 10.4), other users are blocked from using the files, only the owner has "read/write", group and others are "read only". As far as I can tell, file sharing is turned on ok in Workgroup Manager for the folders we share files from. How can we establish sharing for all users on our network?

Niel's suggestion is good. You might also try posting your question in the Tiger Server forums. I'm sure Tiger Server has several ways of dealing with this.

How to set up permission for portal objects and folder

Hi All,
We are implementing EP 7.0. For creating portal objects, I have assigned "Super_admin, Content_admin, System_admin and User_admin" role to my userid and created iviews, roles and folder.
During SAP audit they asked us to open a Iview to show the permission,   the below are the value shown in permission editor.
Role Name           ====== Administrator ===== End User ======Role Assigner
Everyone             ====== Read            ======Yes        ====== No
Super_admin_role ====== Owner            =====Yes         ======Yes
SAP asked us to change the permission and said "Super_admin_role" should not be used, they asked us to create a group or role and assign. We are not clear what SAP wanted us to do.
Can any one let me know how this permission needs to be given and whether "Super Admin" role can be assigned to a userid.
Thanks in advance.
Rgards,
H.K.Hayath Basha.

Hi Michael,
I didn't create any role. I will let yo know what I have done so far.
1. Created a group called "ADMIN_GROUP".
2. Assigned "SUPER_ADMIN" role to group "ADMIN_GROUP.
3. Assigned userid "ADMIN_USER" to group "ADMIN_GROUP".
4. Opened the persmission of "PORTAL_CONTENT" folder and added group "ADMIN_GROUP" and set this group as "OWNER", "END_USER" check box is ticked and "ROLE_ASSIGNER" check box is checked.
5. Removed the role "SUPER_ADMIN" from group "ADMIN_GROUP".
6. Logged into portal using "ADMIN_USER" created a folder called "TESTING". Then opened the
    permission editor for the folder "TESTING", it showed three record
    "ADMIN_GROUP"           === OWNER === 'X' === 'X'
    "EVERY_ONE"               === READ     === 'X' === ' '
    "SUPER_ADMIN_ROLE. === OWNER === 'X' === 'X'
7. I am not able to delete "SUPER_ADMIN_ROLE" from the permission editor, as it is greyed.
With the above steps what I have achieved is I have given permission to group "ADMIN_GROUP". Is this what we need to do. Did I did anything wrong.
Regards,
H.K.Hayath Basha.

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

How to set the classpath for servlet and jsp???

i add C:\tomcat-5.0\common\lib\servlet-api+jsp-api to the class path from DOS prompt, as show below:
set CLASSPATH=%classpath%;C:\tomcat-5.0\common\lib\servlet-api.jar;C:\tomcat-5.0\common\lib\jsp-api.jar
then, i compile the servlet:
javac FirstServlet.java
no error
and i copy the .class file into C:\tomcat-5.0\webapps\servlets-examples\WEB-INF\classes
i set the JAVA_HOME enviroment variable as below:
set JAVA_HOME=C:\Program Files\Java\jdk1.5.0_08
i start the tomcat version 5.0 and run web browser and type http://localhost:8080/servlets-examples/servlet/FirstServlet
i get the error message:
HTTP Status 404 - /servlets-examples/servlet/FirstServlet
type Status report
message /servlets-examples/servlet/FirstServlet
description The requested resource (/servlets-examples/servlet/FirstServlet) is not available.
Apache Tomcat/5.0.30
Can anybody tell me how to solve the problem. Thanks a lot.

You will have to create the servlet mapping in the Web.xml file
<servlet>
             <servlet-name>FirstServlet</servlet-name>
             <servlet-class>FirstServlet</servlet-class>
    </servlet>
<servlet-mapping>
        <servlet-name>FirstServlet</servlet-name>
        <url-pattern>/servlet/FirstServlet</url-pattern>
    </servlet-mapping>

How to Set "Reply"permission for Users for a particular Category in Forum.

Dear All,
We have implemented the SDN Forum in our Portal. As a moderator how can i allow the users to reply to the threads for a particular Category.
I am facing this problem since i Moderated one Forum Category.
Also when am deleting the description for a Category & save it, still it is showing the same again.
i have tried with the Clearing the Cache also.
Please help.
Thanks & Regards
Piyush

you ask DB, he will delete every thing for you.

Help: how to set the permission for filesystem folder

I have been created a Windows FileSystem repository. and I can access it when I am Administrator. but I can not access it using another user. How can I make these user can access that folder?
thanks, best regards
George

You need to do the user mapping of the user to their windows id and password. Make sure it is in the format DOMAIN/username. Your administrator can see them because they are a special user called a system principle.
Paul

How I set character encoding for everypage and alway?

I use Thai window 874 open the page when I select some website it contain Thai then click open new tab it change to western windows 1252. It can not display Thai. I must set character encoding to Thai windows 874 everytime.

Try this:
Prefrences -> Content -> Fonts & Color -> Advanced
At the bottom, choose your Encoding.

How to set the permission of RMAN in Linux?

I have installed oracle XE in Centos, however, when I try to access to RMAN by
rman target /
it shows the error message
[root@localhost bin]# rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Oct 11 17:50:34 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ================================================
RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ========
RMAN-00571: ================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-09925: Unable to create audit trail file
Linux Error: 13: Permission denied
Additional information: 9925
ORA-01031: insufficient privileges
I would like to ask how to set the permission for root to use rman ?
Thank you very much ~!!

Check first if the directory where you save the auditing information is owned by oracle:dba.
Regards
Aron

How to set userlevel permission for GFS and NFS

Similar Messages

Maybe you are looking for