How to set Valuation type in CO production Order

Hi,
I need to create a CO production Order on a material and its valuation type.
I'm using transaction KKF1,
in Settlemnt Rule the field "Valuation Type" is grey ( inactive).
Someone can suggest me how to make this field active,
so I can insert the specific valuation type.
Thank'you in advantage.
Regard's.
Kate

Does this note apply to you? 102878

Similar Messages

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to mass set deletion flag for the production order

Hi Expert,
do you know which transcation code or program is used to mass set the deletion flag for production order?
thank you in advance!

Hi,
http://www.sap-img.com/production/how-to-delete-old-production-orders.htm
Note that CO78 is the start of the Archive process. We are not using Archiving yet but the initial process fits the bill for what we need to do as mentioned in the original note.
Decide the range of orders you want to delete. This range will be used in the program variant. Note that we will be running CO78 many times because of the number of orders involved.
Running CO78 calls program PPARCHP1 and this involves the use of a Variant where the parameters for selection etc. are set.
First of all, create the variant via SE38 for PPARCHP1.
Enter details for number range, order type, plant and set deletion flag. Flag Detailed log and set this to go to Spool when running. Save the variant. You can also force the job to run in background at this point (which I would recommend) via menu line Variant --> Attributes. Also here you can flag order number, order type and plant to be required fields.
Run CO78
Press the first button - deletion flag/deletion indicator.
Choose the variant you have just created. Press "Maintain" to update the selection range on subsequent runs. Save changes and return to initial screen.
Press Start date to set date and time for job to run as per any background job. Icon will turn Green.
Press Spool Params to set save output in Spool Q rather than print immediately. Icon will also turn Green.
Press Execute and job can be tracked via SM37.
Details of deleted orders and errors will appear in the Spool.
Rerun as many times as you need with relevant order ranges till all required orders are deleted.
Hope this will resolve your issue.
Regards,
Naveen.

How to make valuation type field not changeable in delivery tab of PO

Hai friends,
I am new to badis..please guide me to solve the issue...
how to make valuation type field not changeable in delivery tab of PO...
The field shd be in display mode only ...actually...there a badi has been used before
to get valuation type from a ztable depending on material and plant...
Now ..my requirement is that the user shd not change the default value brought from the ztable...

Hi SRINIVAS,
You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
Regards,
Manish

How to set field type choice using csom (c#)

I have a field type: Choice (menu to choose from) which is not multichoice. How do I set a value?
I have found code for multiple choice but it doesn't seem to work for single choice.

Hi,
The following code snippet for your reference:
newListItem["ChoiceFieldName"] = "ChoiceValue";
newListItem.Update();
clientContext.Load(newListItem);
clientContext.ExecuteQuery();
If you are assigning a Value which is not in the Choice Column, You need to create a choice value then assign it to the item.
More information is here:
http://sharepoint.stackexchange.com/questions/124999/how-to-set-field-type-choice-using-csom-c
Best Regards
Dennis Guo
TechNet Community Support

I download itext for convert jsp to PDF. How to set content type for PDF.

I download itext for convert jsp to PDF. How to set content type for PDF. I try
<%@ page contentType = "application/pdf;charset=TIS-620" %>
, but the page does not PDF.
Thank.

PDF files are usually binary files, JSPs are not well-suited for binary content.
(If you download the result of your JSP you'll see that it is not a valid PDF file; it will have probably a lot of whitespace and linefeeds, that will choke your PDF reader.). The first few characters must be
"%PDF-" without whitespace.
You can try using PDF files encoded as text - check if you can use text-encoded PDFs in iText.
Try using a Servlet instead.

Error messages in KO88-"Not set valuation type"

It shows many messages-
"Sender：ORD MZ000610376 RME1100SC28C6T-400-LF not set valuation type for the material 1002-00176" when executing KO88.
I do not understand what this message means.Did anyone have been encounter this message before?

Hi,
what is the 5-digit error message number for the mentioned message ? For example "KOxxx" ?
Best regards,
Andreas

How to control Inspeciton generation from Process/ Production Order

Hi SAP Gurus,
In our business place earlier we used to have Process order.The specific Process order type wouldn't generate any Lot.But once we switch to production order , we are getting inspection lot for New Production Order type.
The need is that for specific production order (which is not for main production), the system shouldn't generate 03, 04 type of inspection lot with many real process / production inspection tests.
For this purpose we tried to limit the inspection type for Production order using Order type dependent parameter.
In that we assign new inspection type (other than 03 or 04 inspection types ). The new inspection type is attached with new Usage.And New usage has got its own Group counter with limited test.
So Group counter created with new usage. New usage used in new inspection type. And new inspection type tied with production order. With this we were able to limit for not having inspection lot of 03 inspection type for this production order.
But system generate the 04 type of inspection lot , though production order has got new inspection type attached with it.
Also the new setup 04 type of inspection lots in created mode.
How to make sure that system only generate the new inspection type inspection lots.
Advance Thanks for all the detail help steps.

Hi
If you want to restrict quality inspection based on production order type, Its possible. Use exit QAAT0001. Take help from ABAPer, dont forget to set E_NO_INSPECTION based on the order type field there. VERY IMPORTANT: Put E_TQ32 = I_TQ32 in the program, otherwise you will get error "Post stock in QM only"
SDG

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

Production Order : OUTPUT Type Configuration for Production Order as EDI

Dear SDN All ,
OUTPUT Type Configuration for Production Order.
Doubt in third Point
We have found the IDoc " LOIPRO01 " for Production Order
(Please confirm that this IDoc can be used for outbound IDoc for Production Order)
And foloowing
1. Defining the Output Type for Particular Application.
 T-Code: NACE
A. Output type have created upder application "ME" description : "Inventory Management"
B. " ZEDI " created for getting output as EDI type
 ZEDI is copied from "WF01" output type. and
 Transmision mediam as "EDI"
 Program : RSNASTED
 Form Routine : EDI_PROCESSING
 (Please confirm is this for IDoc creation)
2. Partner profile creation:
A. Partner profile created under logical system and
B. and In outbound parameter declared as "LOIPRO"(This is for sending the IDoc "LOIPRO01" to XI system).
3. Customization for output type for Proction Order -- (For CO02,CO08) ---
 A. But only one functional customization is remaining to do, for getting the IDoc while saving the Production Order in T-Code "CO02" and "CO08"
 For Example:
 in sales order transaction va02 (in DBI 450 client) and select any Sales order.
 & select following menu path.
 Extras --- > Output -
> Header -
> output
 Here we can set our output type "that U defined in NACE Transaction-Code"
 Like the same way I want to set output type for CO02, CO08 transaction.
But I couldn't find the menu Item in Co02 and Co08 for setting the output.(like VA03)
Please help me out for setting the output type for Production Order Creation.
Thanks in advance,
Dhanabal T
Message was edited by: Dhanabal T

Hello.
I have a similar requirement. Did you guys find the solution?

How to select the correct routing for production order?

In table PLPO i have 4 different group numbers for a particular routing. I'm wondering how a production order, created in CO01, selects which one to use. Our base quantity is dz/hr. When I create an order for a particular material, it shows up as 290 as the base quantity. The group 1 is 400dz/hr, not 200. Why does the order choose this group number and not the group number 1.
   Here is a screen from PLPO table.
   Here is a screen showing the material master.
   This is an image of the order details within the created order.

PLPO contains operations
The planselection would be based on PLKO entries.
Please check online help to first get a better understanding on how routings are selected.
Routing Selection - Production Orders (PP-SFC) - SAP Library
Automatically Selecting a Routing - Production Orders (PP-SFC) - SAP Library
Definition of Base Quantity for Operation:
"Quantity of the material to be produced to which the standard values of the
operation refer"

How to replenish warehouse pick bins for production orders

Hi All,
Currently in WM we use LP22 to replenish the pick bins, here LP22 considers all the outbound deliveries for creating the replenishment TRu2019s
In the similar fashion how can I use LP22 to consider Production orders (raw materials and their quantities) for replenishing the pick bins? My aim is to replenish the pick bins not just for the outbound deliveries but also for the production orders
Please suggest if this can be accomplished using LP22 by running in different ways or there is different transaction.
FYI: the materials that are ordered in the outbound and production order are same
Please suggest
Thank you

Hi,
Instead of opening multiple threads in different forums, it would be better if you reply back to the suggestion provided as to whether it helped or if you need any further help.
This is the link to your same query posted in PP forum
LP22/LP21 for production order
I hope you have gone through the forum rules & would do your bit to ensure the forum is used properly.
Regards,
Vivek

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

Set Mass Deletion Flag for production orders

Hi,
I am planning to set mass deletion flag for production orders using programme PPARCHP1.
My users dont have access to SE38/SA38 and they cant run this program from directly.
I dont wnat my users to do this preprocessig using SARA or CO78 as it will give access to them for whole archiving process + it only works in background.
I am thinking to create a Z tocde for this program and use it in dialogue mode also. Do you guys see any aftereffects with this process?
Let me know if creating a Z tocde sounds a good idea?
Edited by: santosh sarda on Mar 10, 2011 3:23 AM
Edited by: santosh sarda on Mar 10, 2011 3:28 AM

The standard SAP procedure to set the archive is that
- you run COAC in background to set deletion flag and deletion indicator. It should be set as the variant and run periodically (i.e., monthly).
- The system get all orders with DLV status in the past xx days depending on your variant to set deletion flag.
- Also it will change the status DLFL to DLT based on your residence time 1.
- The orders with DLT that reside in system longer than residence time 2 then archive.
This should be done by IT department or background jobs. Not the users.
Which, in my opinion, is enough. However, if you do need the user to select by themselves which orders they want to set deletion flag (why is that?). Then you may want to explore enhancement.
For the sake of simplicity, I will recommend to use user status (normal cohv can change that, as we know; therefore no new fancy screen needed). Then develop the user exit to set deletion indicator in PPCO0002 - EXIT_SAPLCORE_001 based on user status. The rest of the procedure should remain the same.
If you want to allow user to do every steps and develop some Z* screen for users, they must have the authorization for archiving anyway. They just don't have the t-code COAC, and SARA. In my opionion, it is overkill. Plus in terms of users, I don't think they have skills enough if there is some errors during archiving (i.e., logical file error, etc.).
Hope it helps.

How to find suborders for the given production orders?

can any one give solution for finding the sub-orders for my given finished product,
prodution order?
my finished product may have the hierarchy as.....
Finished Goods-> Semi-finished goods -> Semifinished-> up to n numbers
> at last raw material.
how to find the relation ship between production orders and corres ponding
cost for this requirement?
Thanks .
Solution Rewarded.

Hello Meeta
If you are considering Reporting Manager as appraiser.
First get pernr, find out position ID from the infotype 0001, check the relationship A002 maintained for the appraisee's position (HRP1001), and finally to find out Appraiser ID check the relationship A008 (HRP1001) of the appraiser's position.
BR
Reddy

How to set Valuation type in CO production Order

Similar Messages

Maybe you are looking for