How to set waveform time duration in labview

please can anyone help me with how to set the waveform time duration in labview (for real time monitoring and measurement). i need to monitor the system in waveform chart with the time duration 10:00AM TO 4:00PM with the appropriate date. i urgently need any useful information. thanks

If you are trying to manipulate the waveform data itself, look in to the Get Waveform Subset VI.
If you are trying to alter the chart to show a specific section of the data, look in to the Chart's properties using a property node. Specific properties you want are XScale and YScale values.
And like Dennis said, please provide what you've been trying to do. This makes it easier to help.

Similar Messages

How to set the transition duration of a slide in keynote with applescript

hi
how to set the transition duration of a slide in keynote with applescript
i made an applescript script which converts a numbers file to a keynote presentation
figured out how to set the transitions but cant find how to set the time
+set appTransition of slideTransition of current slide to "apple:dissolve"+
anyone?

you can send keystrokes to invoke menu commands via shortcuts but as for transition time not sure. You've check the dictionary right? Scripting support is very limited in KN.

How to set up time capsule with BT Infinity

how to set up time capsule with BT Infinity

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

How to set current time ?

Hi,
I am in eastern time zone and my Apex sysdate shows EST. However the date picker shows four hours ahead (GMT) . The reason I found is the current_time stamp set to 00:00 instead of -04:00. (DBTIMEZONE) . Our DBA does not know much about APEX . When I made qurries about time zone and time stamp at SQL Commonds, the results are as follow:
select SESSIONTIMEZONE from dual;
SESSIONTIMEZONE
+00:00
select current_timestamp,systimestamp, localtimestamp from dual
CURRENT_TIMESTAMP SYSTIMESTAMP LOCALTIMESTAMP
10-AUG-07 01.07.40.740216 PM +00:00 10-AUG-07 09.07.40.740199 AM -04:00 10-AUG-07 01.07.40.740216 PM
when I tried the following statement,
alter session set time_zone= '-4:00';
I got
Statement processed.
but no thing has been changed.
The question is how to set the time so that in the date picker with time It will show me the correct default time. Right now it is showing four hours ahead.
Thanks for the help.

Hi Adnan,
Convert is from date to string :
String bldate=item.getBilling_Date();
                                                  String byy=bldate.substring(0,4);
                                                  String bmm=bldate.substring(4,6);
                                                  String bdd=bldate.substring(6,8);
                                                  String bdate=byy+"-"+bmm+"-"+bdd;
                                                  java.sql.Date bildate=java.sql.Date.valueOf(bdate);
elem1.setBilling_Date(bildate);
Regards
Khushboo

How to set delay time in tooltiptext

Hai,
I'm developing desktop application by using SWINGs in that app there in some text fields for that i have written mouseEntered method.
in that method i used tooltiptext. It working properly. I need it to display message upto mouseout from text field.
so any one could please help me how to set delay time for the tooltiptext.

Read the API for avax.swing.ToolTipManager. Also, you don't need to use a MouseListener, just call setToolTipText or override getToolTipText.
db

How to set default time for appointment

When I had snow leopard, the default time for length of an appointment was one hour. I upgraded to Lion and now the default time is many hours. Can't seem to find the area to change the default. Keith

Hello User,
Check this:-
Sasi Nagireddy: How to Set Default Time Zone for all Users in OBIEE?
Thanks,
Sasi Nagireddy..

How to set expiry time for cached Subjects of authenticated proxy service.

How to set expiry time for cached Subjects of authenticated proxy service in message level authentication.
Because of this, password change does not effect immediatly in proxy invocation.
I'm using Weblogic 10.3 and OSB3.0

Hi,
You can activate Time-Dependent Publishing Service on your XML form and once the Lifetime of Documents is over then the document is not visible to users.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/c87d3cf8ff3934e10000000a11405a/frameset.htm
It is only invisible but not deleted!
So to delete all expired XML Forms you should run Scheduler Tasks for Time-Dependent Publishing:
<b>TimeBasePublishingUnpublish</b>
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/frameset.htm
You can also create your own Scheduler Task which deletes/archieves all expired XML Forms.
Greetings,
Praveen Gudapati
[Points are welcome for helpful answers]

How to set snooze time

Hi ,
Please let us know how to set snooze time to 5 mintues in Iphone5. At present it is having snooze interval of 10 minutues.
We are able to see Snooze off / on but i need to reduce snooze time from 10 minutes to 5 minutes.
Appreciate your valuable inputs.
Thanks

It says in the User guide about the snooze:
"Don't want to get up just yet? When an alarm sounds, you can snooze the alarm. This pauses the alarm for a predefined length of time.
When the alarm sounds, select snooze."
My question is how can I do the predefining? It is now 10 minutes and I would like to make it shorter.
Another question was, if I can define the alarm volume separately from the other sounds of the phone? How can I set the phone mute for sleeping time, and still use the alarm to wake upp?

How to set Account Lockout Duration at 5 minutes.

please suggest how to set Account Lockout Duration at 5 minutes.?

Your question is not very clear but I assume you are referring to setting of the Account Lockout Duration for a user in weblogic realm.
Please refer to the below link for the same:-
http://docs.oracle.com/cd/E13222_01/wls/docs81/secmanage/passwords.html
-Sandeep

How to set default transition duration?

I can't believe Premiere would be so lacking in something so basic that is available in every other NLE I've used, but I can't find a way to set a default audio transition that also allows me to set half a second and not the 1 second default. I don't want to apply a lot of cross fades and then having to go to each of them and typing 15 and enter.
Also, there is an easy way to save any filter as a user preset, including combinations of filters as one preset, but the same is not possible for transitions, audio or video, am I missing something?

Sebasvideo wrote:
Jim Simon wrote:
Maybe I misunderstand but...you can. Right click any transition to set it as the default. Alan told you in post 1 how to set the duration.
So...what's the gripe?
I'm talking about saving transition presets with any duration you want, as well as different types of transitions, like having a cross dissolve that is half a second, another that is 2 seconds, a dip to black that is three, and an exponential fade that is 2 seconds, etc, all accessible in the top Presets folder, instead of having to dig inside a folder that is inside another folder in the effects tab. This is something you can do easily in every other NLE I can remember, Edius, FCP classic, and Vegas if I remember correctly, but I haven't used the last one in a while, although I remember clearly that you can set a script in it to do anything you want, including a fade in and fade out. Why isn't something so basic in Premiere, especially when you can save any filter as a preset? I understand that not all features can be implemented at once, but this is something that has been on NLEs for at least the past ten years. Isn't it about time that Premiere catches up to the rest?
I totally agree with you. Right now the way transitions works (doesn't work, actually) is completely utterly retarded.
You can only set ONE default transition. Only ONE, because there is NEVER going to be a time when you want to frequently use 2, 3, 4 different transitions. NEVER.
You have to dig into the *system preferences* menu to set the duration of that ONE transition. And you can only set ONE duration for ONE transition. There will never ever be a time anyone would ever want to have a few frequent transitions with different durations for each. No, we all only ever need ONE transition with ONE duration for EVERY SINGLE PROJECT WE DO.
Can you tell that I'm frustrated?

How to calculate the time duration on a datetime column?

Hi guys,
I've done some search on this forum and everywhere else but I can't seem to get this right, at the beggining it sounded like something very simple to accomplish, for the instance with Excel but I'm struggling to get it to work with Crystal Reports on Microsoft Visual Studio 2008.
I have a datetime column (SQL Server 2000) that I wanted to calculate the the time duration on the report group footer, unfortunatelly the built-in SUM function cannot be applied and I've tried several formulas that I've found on the internet without any luck. I'm using a datetime column to store only the time because I'm stuck with SQL Server 2000 which doesn't have a time data type.
Would you guys know how to do it by any chance?
Some sample code I've tried: http://www.minisolve.com/TipsAddUpTime.htm
Thanks a lot,
Paul
Edited by: Paul Doe on Dec 12, 2009 5:41 PM
Some sample data:
EMPLOYEE     WORK HOURS
=========     =================
JOHN DOE      1900-01-01 01:00:05
JOHN DOE      1900-01-01 00:20:00
JOHN DOE      1900-01-01 01:30:15
=========     =================
HOURS WORKED: 02:50:20
Edited by: Paul Doe on Dec 12, 2009 5:42 PM
Edited by: Paul Doe on Dec 12, 2009 5:45 PM

Guess what, by further testing the code on the website mentioned above I got it working.
Pus, I needed to change the grouping on the code, so I had to come up with a way to update the formulas based on the groupping field.
Considering "call_date" is the field that you are groupping by on the designer use the following code to update the formula:
CrystalReportObj = new ReportDocument();
CrystalReportObj.Load("C:\\reportfile.rpt");
FieldDefinition FieldDef;
//Get formula
FormulaFieldDefinition FormulaDef1;
FormulaDef1 = CrystalReportObj.DataDefinition.FormulaFields["SubHours"];
//Get formula
FormulaFieldDefinition FormulaDef2;
FormulaDef2 = CrystalReportObj.DataDefinition.FormulaFields["subMinSec"];
//Update the formula to work with the new grouping field,
//this must be called first else will throw an exception
FormulaDef1.Text = FormulaDef1.Text.Replace("call_date", "call_extension");
FormulaDef2.Text = FormulaDef2.Text.Replace("call_date", "call_extension");
//Get the new field we are grouping by
FieldDef = CrystalReportObj.Database.Tables[0].Fields["call_extension"];
//Replace current grouping field with the new one,
//considering there only one group in the report, index 0
CrystalReportObj.DataDefinition.Groups[0].ConditionField = FieldDef;
Have fun.
Edited by: Paul Doe on Dec 12, 2009 8:43 PM
Edited by: Paul Doe on Dec 12, 2009 8:53 PM

How to set up time capsule with router

I have a router N 300 and would like to buy time capsule but I did not find any information how to set up bouth devises. Thanks

You can always bridge the Time Capsule.. it is easy. Once bridged the time capsule will no longer route. All routing is then handled by the original router.. N300 (which could be belkin or netgear and maybe other people call then N300). It will still work as a wireless access point.. unless you turn it off, a switch with WAN now allocated to LAN, and a network drive.
Just look up bridge.
But there are other ways to do things. You could replace the N300, unless it is a modem.. in which case you can bridge that and use pppoe client on the TC (if you ISP does pppoe).

How to set system time from Terminal while booted from 10.6.3 server install disk?

I'm installing from a 10.6.3 server install disc onto a Mac Mini. However, the battery on this Mac Mini is pretty much dead, forcing the system time back to 1/1/2001. Through some research, this has created a problem in that I cannot move beyond the Welcome screen during setup of OS X server. It looks like the binary has issues with the system time being older.
But I'm stuck in that I don't know how to adjust the system time from the Terminal Utility on the boot CD. Can anyone help?

Hey, i just run in to something similar, tonight while trying to fix a computer.
The user set the time and date on his computer to 1998 and computer locked everything including time and date in system preferences, and his user account basicly making him from administrator to guest. he could not almost any program properly that required administrator privilages.
to fix this we used this comand in terminal " sudo date 201703162014 " todays time and date
20:17 03/16 2014
we tryed everything and this fixed in 2 seconds
ps: when you type sudo in terminal it whil give you a warning the improper use of this command is bad.... click continue.otherwhise you will not be able to execute the command.
thanks again for this post and have a great day

How to set a time zone in Agentry.ini

Hi All,
I am working on Syclo - MRS integration. We assign a service order in MRS which is in (UTC+03:00) Kuwait, Riyadh .
When the Syclo client downloads the service order it is in a different time zone and it displays the time according to their time zone.
Which creates a mismatch in the assignments.
I have modified the time zone in Agentry.ini to pick the time (UTC+03:00) Kuwait, Riyadh. but this is not working.
Can you please check the Agentry.ini or suggest how to set this.
[Configuration]
developmentServer=False
[TimeZoneAlias]
ABST=(UTC+03:00) Kuwait, Riyadh
[HTTPXML-2]
authenticationCertificateStore=MY
authenticationCertificateStorePassword=
authenticationCertificateStorePasswordEncoded=false
autoDequote=true
baseURL=http://localhost:8282
basicAuthenticationPassword=
basicAuthenticationPasswordEncoded=false
basicAuthenticationUserID=
constantsFile=httpxml_sd.ini
enableAuthentication=false
enablePreviousUserAuthentication=false
httpConnectTimeout=60
httpReceiveTimeout=300
httpResolveTimeout=60
httpSendTimeout=300
listenOn=8282
name=HTTP-XML Back End
timeZoneName=(UTC+03:00) Kuwait, Riyadh
timeout=300
useSSL=false
xmlAllowXSLTScript=true
xmlNamespaces=
xmlResolveExternals=true
xmlValidateOnParse=true
[Java-1]
classPath=./ini4j.jar;./sapjco3.jar;./Java/Agentry-v5.jar;./Java;./Java/SAPCRMSM-4.1.0.0.jar;./Java/SAPCRMSM_CSS.jar
constantsFile=
deleteSource=True
enableAuthentication=True
enablePreviousUserAuthentication=True
initialHeapSize=256
maxHeapSize=512
name=Java Back End
timeZoneName=(UTC+03:00) Kuwait, Riyadh
nonStandardJavaOptions=
outputDirectory=.
performCompile=False
printBusinessLogicStackTrace=False
printStackTrace=False
reduceOSSignalUse=True
scriptsPath=
serverClass=com/syclo/sap/crm/Server
sourceDirectory=.
[System Connections]
1=ag3javabe.dll
2=ag3httpxmlbe.dll
Thanks
Neha

Hi Neha,
The [TimeZoneAlias] section should have all the mobile device time zone in it. The spelling has to be exactly what is seen on the mobile device. The Mobile Device timezone transmits to the Agentry Server , it maps based on what the server understands, then transmit back to the Backend.
Eg:
[TimeZoneAlias]
Australian Eastern Standard Time=(UTC+10:00) Canberra, Melbourne, Sydney
India Standard Time = (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi"
Note: Agentry server while adjusting the timezone gets the list of timezones from Windows registry. It was found that some of the timezone settings may not be recognized by the Windows OS in the server. Please verify the same.
Modify your Agentry.ini to include the exact spelling of your mobile device time zone alias plus the corresponding equivalent as understood by the Agentry Server. I am also attaching the official KBA note tied to Time Zone Alias.
http://wiki.scn.sap.com/wiki/display/SAPMOB/Set+Up+Time+Zone+Alias+in+Agentry.ini+Configuration+File
https://support.wdf.sap.corp/sap/support/notes/1813025
Additional discussion (Thread): Syclo - Client Time Zone error message
Thanks
Resmi

How to set correct time

My time stardard set to HARDWARECLOCK="UTC" and TIMEZONE="Asia/Shanghai" in /etc/rc.conf,and code:hwclock --set --date;date;hwclock --systohc/--hctosys,etc. but can not get the correct time when restart mechine second day.
Output of my mechine:
$date
Thu Jan 14 12:17:22 CST 2010
$hwclock --show
Thu 14 Jan 2010 12:19:12 PM CST -0.588858 seconds
How can I get correct time?Thanks a lot.

Primoz wrote:It's not that hard to set and once you set it, you never need to worry again (, well only if you're reinstalling...)
or when booting windows on your other partition. somehow windows changes my time when I boot it. I read about this problem somewhere but forgot the elegant fix for this (I don't really care since I rarely boot windows) so I use ntp to set my time again.

How to set waveform time duration in labview

Similar Messages

Maybe you are looking for