How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie  never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them. 
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do. 
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features. 
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings. 
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful! 

Similar Messages

  • How to Set up Print As Image Registry Default.

    This is a response to the archived post at:
    martin hrubes, "How to customize printing by registry - print as image" #, 6 Nov 2007 2:28 am
    I was trying to find out how to set the "Print As Image" advanced setting to be enabled by default. Here is what I discovered through trial and error.
    1. The setting is stored per user and per printer. (i.e. it has to be set for each printer for each user.)
    2. The registry setting is stored in the following key:
    [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\8.0\General\cPrintAsImage]
    3. In this key, each printer has a separate binary value named s0, s1, s2, etc. The number increments by 1 for each printer added. If you open the value data, you will see it contains the name of the printer encoded in hex. (ex. hex coded for \\Server\Printer1)
    My recomendation is to open a pdf file in reader, go to File -> Print ->Select Desired Printer -> Click "Advanced" Options -> Enable "Print As Image" -> Click OK - Click OK again. Repeat for each printer you want to
    change.
    **NOTE** If you don't click OK both times (i.e. cancel the print dialog), the change will not be saved. You have to actually print something to the printer. If you don't want to print something, make sure the printer is offline or not accessible (unplug the network, usb, parallel, serial cable) first. Once the printer has been changed, it will keep the setting until to you change it.
    After you have set-up all of the desired printers, open RegEdit and navigate to the above key. Right click on it, and export it. Note the file name and location you are saving to. Close RegEdit. "Edit" (Right Click) the file just exported ("Opening" the file will just import it back into the registry.). Once opened, highlight and copy the registry key and all of the registry values. Paste the key and values at the end of the file. In one of the keys change "HKEY_CURRENT_USER\" to "HKEY_USERS\.DEFAULT\". Save and exit the file.
    When imported this file will enable the "Print As Image" setting for the currently logged in user plus add the setting to the default users profile so any new users to the machine will have it enabled by default also. However, it will not add it to any other user profiles that already exist on the computer. To do this, either use a login script for domain computers or add the reg file to the "All Users Startup" folder.
    It would be nice to have a setting in the deployment custimazation wizard to handle this, but for now we're stuck with enabling it the hard way.

    Yes Spyla, please see this link http://www.404techsupport.com/2008/09/09/make-adobe-reader-and-adobe-acrobat-use-print-as- image-setting-by-default-2/comment-page-1/#comment-3112.
    Allan, many thanks for your post, it certainly helped point me in the right direction.  what I found though is that you do not need to tick the print as image box at any point during the setting up of this.  All you need to do is add the registry key for whichever version of Adobe you are using for this to work.  So basically. what you are saying for each instance of Adobe is regardless of whether or not the print as image is selected, the registry key is saying always print as image for the printer as specified by the hex code. I have found that for network printers, you have to include the full path i.e. \\<servername>\<printername> e.g \\testserver\printer1 and convert all of that to hex. With later versions (9 up over), they have allowed for the string name of the printer so that it is just plain text which also makes life easier.
    What I do is apply this registry entry via Group Policy on a per room basis so that we only ever need to add one printer to the list.  you could do this globally by adding all printers sequentially using s0, s1, s2 or t0, t1, t2 etc depending on which version you are using.  The screenshot shows the registry key for 1 printer for Adobe Reader 8.
    The value data is the binary code for the actual full printer name
    This works a treat.
    Hope this helps
    Thanks

  • How to set default print orientation in oracle reports 6i?

    Can anyone please help how to set default print orientation of Oracle Reports 6i? Currently document is printed in Portrait orientation, but I need to print it in Landscape orientation. Is this possible?

    It is solved now. Go to Layout Model -> Main Section, Press F4. In the property pallet select the Orientation that is required to be selected when print is taken for that report.

  • How to set up printer from ipad?

    how to set up printer from ipad?
    Johs.

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • How do I set up my airport express to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

    how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

    I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!

  • How To Generate And Print Reports In PDF Format From EBS With The UTF8 Char

    Hi,
    I want to know How To Generate And Print Reports In PDF Format From EBS With The UTF8 Character Set in R12.0.4.
    Regards

    Refer to Note: 239196.1 - PASTA 3.0 Release Information
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=239196.1
    Or, you can use XML Publisher.
    Note: 551591.1 - Need Latest XML Publisher / BI Publisher Patches For R12
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=551591.1

  • HT1893 How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3?

    How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3? I cannot get the drivers to work?

    bdmorgan wrote:
    Thank you once again Matthew. I understand the importance of being thourough and followed your instruction exactly. I really thought that this would solve it and was ready to click 'This solved my question'. However I still have the same print options as before, no 'A1 on the roll'.
    Although, when I copied:
    'sudo pkgutil --forget org.linuxprinting.foomatic-rip'
    into Terminal it did say somehting along the lines of 'nothing found' (sorry I didnt copy the text). Could this be part of the issue?
    In this case the instructions were incorrect.  I forgot that the uninstaller would run that command.  The reason for that command was to let the system know that foomatic-rip 4.0.6 had been removed.  I am sure that you were able to then install foomatic-rip version 3.43.2.15.  There are two ways to confirm that the older version is now installed.  First, if you can print at all, it is present.  You could also copy and paste the following command in the Terminal.  It should respond with the version that is installed:
    pkgutil --pkg-info org.linuxprinting.foomatic-rip | grep version
    Do I need to change the PPD at all?
    There is no need to change the PPD.  PPDs are reflective of the software (drivers) that are called from the PPD.  You can put anything you want in the PPD.  If that capability is not in the driver, having it in the PPD won't make it work.
    Setting a job to print from A1 Roll Paper is a two step process.  First you select the Paper Size which is A1.
    Then look under the pop up menu below Paper Size for an item called Paper Feed.
    Select Paper Feed.  Then you will be able to select where/how the paper is being fed to the printer.  This is where you can choose Roll Paper (Cut) or Roll Paper (No Cut) among other choices.
    Other drivers may have A1 Roll Paper listed under Paper Size.  Perhaps that is how the HP driver was.  There would still have had to be a place, then to check whether or not you wanted the paper to be cut and/or whether you were feeding sheets of paper from one of the other paths.
    Let us know if you can find all the options now and that you are able to keep your normal workflow.

  • How to set up Airport Express in Bridge mode for hotel use

    Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

    +"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
    AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
    If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
    http://support.apple.com/downloads/#airport

  • Bought print central app have an impact Lexmark s300 series wireless printer can't get it to work with my I pad , help

    I bought the print central app have a Lexmark s300 wireless printer can't get it to work with my I pad any suggestions

    To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
    Hope this helps.

  • How to set the transition duration of a slide in keynote with applescript

    hi
    how to set the transition duration of a slide in keynote with applescript
    i made an applescript script which converts a numbers file to a keynote presentation
    figured out how to set the transitions but cant find how to set the time
    +set appTransition of slideTransition of current slide to "apple:dissolve"+
    anyone?

    you can send keystrokes to invoke menu commands via shortcuts but as for transition time not sure. You've check the dictionary right? Scripting support is very limited in KN.

  • How to disable the printer's color management in Photoshop CS5 with Mavericks?

    Hi there, does anyone know how to disable the printer's color management in Photoshop CS5 with Mavericks? There doesn't seem to be an option. Could you help? Many thanks

    Just select Photoshop Manages Color, and the printer driver color options should be disabled.

  • If I buy an HP wireless printer, what do I need to do with my Ipad2 to print?

    If I buy an HP wireless printer, what do I need to do with my Ipad2 to print?

    I'm not sure what your question has to do with networking on the AirPort Express, AirPort Extreme, or Time Capsule....but if you buy an AirPrint compatible printer, it will work with the iPad2.
    http://support.apple.com/kb/HT4356
    Suggest that you post in the iPad support area for more details
    iPad

  • How to setting the printing option in javafx 2.1 or later?

    Hi,
    We need to printing pdf document in our project, it's can use the open source to do it now, but it's has some problem when running the program in other pc.
    Step 1, It's setting the program with full screen in our program.
    Step 2, In the button event, we call JDK swing print dialog to setting the page option.
    They will not bring the swing frame to front, and the Javafx program unable to response cause by the swing printdialog.
    If anybody know how to deal with the paper option setting by Javafx, Please help me, thanks a lot.

    Vibhor - You are developing using the Oracle Application Express facility running on Oracle Database 10g Express Edition. You can export applications you develop there for use on Oracle Application Express versions 2.0 and higher which can be used with Oracle Database server versions 9.2.0.3 and higher.
    Electing to install an application as Run Application Only will prevent the editing of the application definition by the end user. This can be useful if you assume that the end user will have access to the Application Builder in his database, which is likely if the end user's database is Oracle Database 10g Express Edition (XE). However, there is no way to prevent an XE user from having complete control over applications installed into those databases. If the end user's database is not XE, then only an Oracle Application Express site administrator will be able to change the application's Run Application Only setting to Run and Build Application but all developers with developer accounts in the Application Builder will be able to view and edit the application definition.
    Further, when you say "he can easily access my code", remember that the application definition is contained completely within the export file that you distribute but you may have in mind your PL/SQL source code as well. PL/SQL can be wrapped using a utility to make it more difficult to see in clear text.
    Scott

  • How to set default printing in black only

    Greetings,
    I'd like to set my default printing with Firefox at black ink only, which I can do individually prior to printing a page, but it reverts to color after that printing. But if I set the size at, say, 80%, that becomes the default setting, or if I set portrait/landscape for a single printing, that becomes the default setting. Why can't the desired black-ink only setting default like the size/portrait/landscape setting? What I want to do is set the printing permanently at black only, and the size at 100%, but allow one-time printing at landscape or portrait, or sizes less than 100% without those settings becoming the default. How can I do this? Thanks for any help
    Best wishes, Tom
    I've tried the help solutions on the website to no avail....

    Greeting ideato,
    Thanks so much for your reply. I've clicked on the Firefox button at upper left, then Print, then Properties, then Advanced, under which is listed Printer Features (I have only 1 printer), below which is a line with Print in Grayscale, clicking on which has has 3 options: Off (apparently default), High quality Grayscale, and Black Ink Only. I click on the latter, and click on OK for this window and others in the sequence, and it'll print in black only for the present printing, but will revert to color for the next printing, 'though like I said, if I change the size to 80% or from portrait to landscape, those settings will remain. I can't figure it out. Again, thanks for any help.
    Regards, Tom

  • How to set the printer setting in VBscript

    i have a folder which is containing 20 pdf files ,i want to print only 2nd page with 2 copies in all 20 PDF files.
    i have VBscript 
    TargetFolder = "file path"
    Set objShell = CreateObject("Shell.Application")
    Set objFolder = objShell.Namespace(TargetFolder) 
    Set colItems = objFolder.Items
    For Each objItem in colItems
        objItem.InvokeVerbEx("Print")
    Next
    here all files are printing all page but how to set 2nd page with 2 copies in 20 pdf files

    You don't mention what SDK you're using.
    If you're running a Nokia SDK, for instance, you need to explicitly set the proxy URI somewhere else. Try running your MIDlet with Default Color Phone and see if it works.
    Unfortunately, proxies do not use exactly the same HTTP request method as normal Web clients (i.e., browsers). Most caches are smart enough to try to be transparent, however. It might be worthwhile to ensure that your proxy is set up as a transparent one.
    Worst case scenario, you can always host the files on a server inside your LAN, so it doesn't have to breach the proxy (or, indeed, on a little Web server running on the same machine as the emulator).
    Jouster

Maybe you are looking for