How to set WNDR4000 as an access point using Linksys EA8500

New member.I have looked through the messages and found quite a few on access points but either I don't understand them or the topic is not the same.I had a Netgear R7000 which died and I now have a Linksys EA8500. I am getting good speed through it and am on Comcast cable.The WDNR4000 was set up as a access point on my Netgear and worked fine. It is hard wired to my router through a switch.I can see it on my Linksys network but can't understand how to allow it as an access point / internet access. I can connect a device to the WNDR4000 but there is no internet.I have the MAC address for the WNDR4000. Thanks in advance to the group. rick

Thanks again.Here are more details.My Linksys router's IP is 192.168.1.1. No problem logging in to it.IP range is 192.168.1.100 192.168.1.14950 max connectionsNo static DNSNetgear AP is 192.168.1.100 and it is static.(I can change the range per other reply to start at 101) NAT is enabledDynamic routing not enabledNo static routingVLan off Internet settingsDHCP auto configOptional Name: badMTU > AutoMac Address Clone: not enabled Cable info:Linksys router - port 4 connected to my Airlink 101 1000M switch. Airlink 101 > plugged into port 15 x 10/100/1000Mbps Auto MDI/MDI-X Gigabit Ethernet portNetgear WNDR400 > plugged into Internet port When I try to connect to the Netgear using 192.3168.1.100 it cannot connect.Not Found > Web Server at airlink101.comI may need to connect the netgear directly to my laptop and try to access its UI. As I mentioned it shows up in my Network on the Linksys. I was able to connect a laptop wirelessly to it but it has no internet. I hope this helps.thanks againrick  

Similar Messages

  • Scale out file server client access point using public nic

    Thoughts on this one.
    I have a Scale Out File Server cluster with a Client Access Point. Whenever i talk to the Client Access Point it uses the public nics.
    If i talk to the Scale Out File Server directly it uses the private like i want it to. How can i get the Client Access Point using the private nics?

    Hi JustusIV,
    Could you tell us why you want to modify the CAP use the “private” network, the CAP is used for client access, your clients may can’t access your cluster if modify your CAP
    use private network, if you want know how to modify the CAP of a cluster you can refer the following KB:
    Modify Network Settings for a Failover Cluster
    http://technet.microsoft.com/en-us/library/cc725775.aspx
    More information:
    Understanding Access Points (Names and IP Addresses) in a Failover Cluster
    http://technet.microsoft.com/en-us/library/cc732536.aspx
    Windows Server 2008 Failover Clusters: Networking (Part 4)
    http://blogs.technet.com/b/askcore/archive/2010/04/15/windows-server-2008-failover-clusters-networking-part-4.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • How do I set the transition between access points would be fine?

    Hello everyone,
    We have an organization Wirless controller 2504 with 20 aironet access-point (700 series)
    Once I defined  all the access points I noticed that the transition between them is not working fine...
    I mean that clients can not walk around in our organization without having to connect to any access point separately.
    How do I set the transition between access points would be fine?
    Thanks a lot (:

    HI Omri,
    which software version you have on WLC ?
    Is the site survey done propely ?
    Remember: It is the client that decides when to roam and which AP to connect to based on what it perceives the signal to be.
    If your site survey design is perfect and still have problems while roaming then:
    Disable your lower data rates on the 2.4ghz and or 5ghz radio and your clients will roam better. Try to disable everything below 11mbps. and give that a try.May be old device will work in this case.
    Regards
    Dont forget to rate helpful posts

  • How to set sourceURL for MS Access database in other computer?

    How to set sourceURL for MS Access database in other computer?
    getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess");
    How do you determine the port for the MS Access?
    Thank you very much.

    How to set sourceURL for MS Access database in other computer?You don't.
    How do you determine the port for the MS Access?You don't.
    Databases like Oracle and MS SQL Server have 'server' software which runs on a server computer. Requests talk to that server software. MS Access does not have a server, so there is nothing to talk to.
    You either must use a DSN or create you own server. For the DSN each client must have a mapped driver to the computer with the database. For your own server search the Sun site for JDBC drivers or use RmiJdbc (http://www.objectweb.org/)

  • How do i ensure the new access point is joined the controller or not

    How do i ensure the new access point is joined the controller or not

    To Verifying that Access Points Join the Controller or not there are two ways as below.
    Please go through the step by step to find the APs joined state
    When replacing a controller, you need to make sure that access points join the new controller.
    Using the GUI to Verify that Access Points Join the Controller
    Follow these steps to ensure that access points join the new controller.
    Step 1 Follow these steps to configure the new controller as a master controller.
    a. Click Controller > Advanced > Master Controller Mode to open the Master Controller Configuration page.
    b. Check the Master Controller Mode check box.
    c. Click Apply to commit your changes.
    d. Click Save Configuration to save your changes.
    Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
    Step 3 Restart the access points.
    Step 4 Once all the access points have joined the new controller, configure the controller not to be a master controller by unchecking the Master Controller Mode check box on the Master Controller Configuration page.
    Using the CLI to Verify that Access Points Join the Controller
    Follow these steps to ensure that access points join the new controller.
    Step 1 To configure the new controller as a master controller, enter this command:
    config network master-base enable
    Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
    Step 3 Restart the access points.

  • How to set up the airport express with a linksys wireless-g broadband router

    I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

    If that is all that is done, the Express would not provide more wireless coverage.  Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area.  As per my above comment, one Express connects via Ethernet to the Linksys.  The second Express provides the extension.
    You must have misunderstood what I was saying.
    Linksys is providing a wireless network.
    The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
    The Express is located on the other side of the house, for example.
    The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
    The Express is configured in Bridge Mode
    This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
    Although this is an "extended" network, it is technically known as a "roaming" network.
    This is what I was suggesting as a possible alternative without having to buy more hardware.

  • How to set fetchsize of sql Query when using Database Adapter.

    Hi All,
    I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
    Thanks
    Chandra

    I talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
    hth clemens

  • How to set a variable in portal session using web dynpro java.

    Hi,
    I have created a web dynpro application, which is running inside portal. I have created a role called "R1". Inside role R1, i have created 3 workset W1, W2 and W3. and inside each workset i have some pages and iviews.
    My requirement is when user logins to the portal , and when he clicks on role R1 for the first time, a login page should come (so that we can do revalidation), and when he enters his password again in that login page , then only workset W1, W2 and W3 should be visible/accessible to him and after successful revalidation, if he clicks again on role R1, in that particular portal session, than that login page should not come.
    for this, i thought i will set a variable in portal session, whenever user successfully revalidated himself, and if after successful revalidation he clicks again on role R1, i will check in doinit method of webdynpro whether variable is set or not (which i already set on successful revalidation), and if it is set then i will do Donavigation else i will present login page to the user.
    Can anyone tells me how to set a variable in portal session using web dynpro java.
    thanks
    Arush

    Hi,
    Try this:
    WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE, key, value)
    WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE, key)
    Ex:
    WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE,"Key1","Value1");
    String value1=WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE,"Key1").toString();
    /people/william.cui/blog/2007/02/12/sharing-session-context-between-parent-and-external-windows-running-on-same-host
    Regards,
    Charan

  • How to set value for trim and bleed using jsx script?

    I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
    Following is the code I am trying with:
    var _saveName = new File ( root_path +_strFileName+".pdf");
        var _saveOpts = new PDFSaveOptions();
        _saveOpts.printerResolution = 300; 
        var bleedarray = new Array();
         bleedarray[0] =9.00;
         bleedarray[1]=9.00;
         bleedarray[2]=9.00;
         bleedarray[3]=9.00;    
        _saveOpts.bleedOffsetRect = bleedarray;

    I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
    var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
    Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

  • How to set request number of info package using start routine

    Hi All,
    I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
    Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
    Thanks
    Sangita

    You'll probably want to do this in a start routine.  It is probably not advisable to hard-code the technical name of the InfoPak.  They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
    I would do a SQL select like this in a start routine, and then filter based on the results of the SQL.  You'll probably want to sort the results by date and time, both descending.  Or do a MAX in the SQL.
    Please let me know if this isn't clear.
    select q~rnr q~logdpid q~tdatum q~tuzeit
    from rsreqdone as q
      inner join rsldpio as p
        on p~logdpid = q~logdpid
    where p~objvers = 'A'
    and p~logdpid like 'ZPAK%'
    and p~source = 'your data source'

  • How to set default value of a table using sequence number

    Dear all,
    Does any body know that how to set default value of a table
    using sequence number.
    But I don't want to use trigger to do that.
    Please help!!!!
    Eldon

    Andrew is essentially correct. You can get around the trigger,
    but not the sequence, if (and this may be a very big if) you can
    guarantee that every time an insert is done into the table, from
    whatever source, the statement looks something like
    INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

  • HT2534 I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    Follow the steps on this page when creating a new account http://support.apple.com/kb/HT2534
    e.g. if using a computer's iTunes : https://discussions.apple.com/message/24321860
    If you've already created an account and are being prompted to review it when trying to see it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054

  • How do i set up a wireless access point with ny time capsule

    I am using a new Airport Extreme and want to utilize my older TC to create a wireless access point or maybe an aditional router using the same newtwork.  What are the steps to set this up?
    Thanks
    Alamo

    You will first need to perform a Factory Default Reset on the Time Capsule.
    Resetting an AirPort Base Station or Time Capsule FAQ
    Then, temporarily locate it in close proximity (same room or nearby) to the AirPort Extreme.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click the tab in the upper left hand corner of the AirPort Utility window that reads Other AirPort Base Stations (1), then click the Time Capsule
    AirPort Utility will take a moment or two to analyze your network, then announce that the TC will be configured to extend your wireless network.
    Enter a name for the TC (you can use the same device name that you used before if you wish) and click Next.
    AirPort Utility will take a another minute or two to configure the TC and then tell you that the setup is complete. Click Done
    At this point, power down the TC and move it to a location that is approximately half the distance from the AirPort Extreme and the area that needs more wireless coverage.....to give the TC a good strong signal to "extend"
    Power up the TC and wait for the green light and then you are all set.

  • Set E1000 as an Access Point

    I am wanting to setup my E1000 as an access point to an internet connected wired network so I can access the computers on the wired network and the internet. I attempted to use the Linksys "Guide Me" support, but it directed me to how to on another type of router using a different firmware. Does anyone have any suggestions?
    Thank you,
    Eric

    Note that below when I say router I mean the modem/router
    Assuming you wanted to know what the DHCP was assigning, it should be assigning the lower half of the 100s (it assigned 192.168.1.101).  Gateway and DNS are set to the router itself.
    Messing some more with it, it seems like it might actually be the E1000 blocking on it's LAN switch.  Something connected behind it won't get DHCP, but if I manually assign it an address then I can hit both the E1000 and the router, but no DNS.  Right now I'm thinking the E1000 is blocking DNS and DHCP requests.  I'd tried turning off the firewall and unchecking everything as well, but no dice.

Maybe you are looking for