How to set your timed access default to no access?

Hi,
I deleted my default no access entry on timed access tab on my router, and now i can't add another default no access, since it requires a Mac address to save it.
what do i do?
how do i set the default to no acceess again to prevent unwated access?
thanks,
Ben

I am not sure what you did, but I cannot figure out how to duplicate it. You cannot "delete" the default rule, but you can change it from Unlimited, No Access, Everyday Between, etc.
If you cannot get things back to a starting point, you are going to need to perform a Factory Default Reset to get the AirPort back to default settings, then reconfigure it again.  This will bring the default rule back to Unlimited access, where it belongs.
Then, you can add the "exceptions" or "rules" for each device that you want to control by timeframe each day.
If you need to start all over and perform a Factory Default Reset......
Power off the AirPort Extreme
Wait a minute or two
Hold in the reset button first, and keep holding it for an additional 7-8 seconds while you simultaneously plug the power back in to the AirPort
Release the reset button after the hold period and allow a full minute for the AirPort to restart to a slow, blinking amber light.
Now you can set up the AirPort again and adjust Timed Access as needed.

Similar Messages

  • My HP Officejet Pro 8600 Plus prints emails as landscape only; how to set to A4 as default?

    All of a sudden my printer has set to landscape printing of emails; how to set it portrait as default for printing?

    Hi there @OB1214 , welcome to the forums
    I understand your emails are printing in landscape. If the issue is only when printing emails, there may be a setting within your email settings to change the print settings.
    If all of your programs are printing in landscape, check the print settings on your computer.
    Changing Print Settings in Mac OS X
    Changing Print Settings in Windows 7
    I hope that helps!
    If the problem continues, please let me know the details and also which OS you are running.
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to set a platform's default character encoding

    Hi,
    Does anybody know how to set how to set a platform's default character encoding in Java? Thank you.
    Yugang
    [email protected]

    You do 0mean for Java, not from Java? (The latter would make absolutely no sense at all.) If so, pass it to the runtime using the -D switch (you've got SUN's java, right?):
    java -Dfile.encoding=the-encoding-i-like the.name.of.YourClass

  • [LENOVO Y50-70] How To Set NVIDIA Card as Default Graphic Adapter

    I have just bought Lenovo Y50-70. But i wonder how to set NVIDIA Card as default Graphic Adapter instead using Intel Card. Thanks

    hi monx,
    Welcome to the Forums.
    The Y50-70 uses Nvidia Optimus Technology to automatically switch between the Intel GPU (for power saving) and Nvida GPU (for maximum performance).
    To manually set the default graphics adapter, you will need to set this inside the Nvidia Control Panel > Manage 3D Settings.
       - Sample image
    More info:
    http://support.lenovo.com/us/en/documents/ht071337
    Regards

  • How to set up the Time Capsule as an access point

    Hi there,
    I have home office and am having wifi-connectivity issues due to the layout of my home.
    I'm getting the electrician to set up ethernet outlets in various rooms in my house so that I can get wired connections in several rooms. What I want to do is connect my Time Capsule to one of those ethernet ports (see the diagram below) so that I can still broadcast a wi-fi signal in my house while having wired connections elsewhere.
    |->
    Lan Port 1
    Home Office (Laptop)
    |
    |->
    Lan Port 2
    Living Room (TV)
    Modem
    ->
    Wired Router
    |
    |->
    Lan Port 3
    2nd Bedroom (Xbox)
    |
    |->
    Lan Port 4
    Dining Room (Time Capsule)
    In my research in how to set this up, I've come across documentation that shows how to convert an old Netgear/Linksys wifi router to an access point. Here's an example of the documentation I've run across: http://www.smallnetbuilder.com/wireless/wireless-basics/30338-how-to-convert-a-w ireless-router-into-an-access-point. What I haven't encountered is how to do this with a Time Capsule.
    Here are my questions:
    Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
    I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
    all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
    I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
    Thanks a ton for any help or advice. It's much appreciated.

    Excellent.. great to see people doing the job properly and wiring ethernet.
    Here are my questions:
    Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
    Apple system is slightly different.. although the AP method would work the TC has a programmed state for placing it in AP mode.
    And Apple even documented it.
    http://support.apple.com/kb/HT4260
    The difference in your system, is you are not using an Apple primary router (I presume) but otherwise the same.
    Any router setup as WAP, you bridge the router part.. and you use Same wireless name.. same security setting (WPA2 Personal is WPA2 AES and the only one suitable). Same passkey..
    I would add one difference to the apple insstructions.. they depend on auto wireless channels working. IMHO, auto anything in wireless is akin to voodoo black arts and has more to do with beads and rattles than science. It works fine in some case.. terrible in others.. lock it down. Set the wireless yourself.. at 2.4ghz there are only 3 non overlapping channels.. 1, 6, 11 .. if you use 300mbit N on the main router, it will use 2 of those channels.. choose the third for the TC.
    Of course the TC can also use 5ghz.. and I lock it down as well but that is more my control freak nature.. and strong skeptism of anything auto in the wireless world.
    I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
    all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
    I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
    Your number auto changed.. fun isn't it when i edit it shows correctly but when I post it changes the format.
    On the new setup the printer will still be available to all clients .. whether wireless or wired.
    And to second part, yes, all file access is not going to change.. well I don't predict any.. IP of the system might change around but overall you are creating a single flat network. And that will work fine.

  • I am on itunes on my iphone, i bought a ringtone but i cant figure out how to set it as my default.

    I bought a ringtone using my itues store on my iphone, and bought a rigntone. How can I set it as my default. I cannot find the option to get it set up

    Hey kashaenaparisi,
    Thanks for the question. The following resource outlines how to change your default ringtone for all calls:
    Change your ringtone - Phone - iPhone Basics - Apple Support
    http://support.apple.com/kb/TI8
    If you wish to have a ringtone for a specific contact, see this resource:
    Set a special ringtone for a contact - Phone - iPhone Basics - Apple Support
    http://support.apple.com/kb/TI16
    Thanks,
    Matt M.

  • Can't put IE Metro into full kiosk mode Win 8.1 Enterprise or set IE desktop as default in Assigned Access

    I have searched everywhere for this answer.  Kiosk mode/assigned access is excellent.  But it appears that you can only use IE Modern (Metro) for assigned access and the problem with that is I have found no way to completely lock down IE Modern. 
    I can only partially lock it down but users can still get to the address bar and settings very easily.
    I either need some advice on setting IE to complete lockdown or how to set IE desktop for Assigned  Access.

    I am afraid there is no such feature in metro IE. Maybe you could submit a feedback to
    IE connect
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SQ01 (How to set Global Area as default)

    Hi All
    In SQ01, i find 2 environments in Query Areas - Global Area & Standard Area. Everytime i execute SQ01 transaction, it takes me to Standard Area, then i have to change it to Global Area & then select the user group. I would like to know how i can set Global Area as default & also a particular user group, so that everytime i run SQ01, it directly takes me to Global Area & the particular user group, so i can execute my query directly instead of having to change it each time.
    Hope my problem is clear, await inputs.
    Vivek

    Hello Vivek,
    You need to maintian some default parameters in your User master record.
    Parameter ID :
    AQB for User Group
    AQW for Query Area.
    Select the AQB from the drop-down and give your default user group in the parameter value.
    Regards,
    Naimesh Patel

  • How to set local help as default in ID CS5?

    Just received a replacement laptop w/CS5 installed & cannot figure out how to disable/turn off community help...I want it to default to local help whether connected to the net or not.
    Thanks
    Update Info:
    Or, if setting local help as default is not possible, what about turning off or disabling internet sensing by the program?  This will be used in the field and sometimes slow connections are the only thing available.  Testing it on a dial-up connection, it just set there trying to access community help without allowing access to the local help until the dial-up connection was closed.

    Thanks Peter...I'd already found that, but when I first found it, the last section was not in that screen and in playing around, I found that Air was not installed proprly, uninstalled & re-installed that & that last section with the 2 ticks showed up & selected local help.
    Next, I get a message that there is no PDF reader installed...but a working copy of AR7 is & it works...I'm thinking that CS5 should be uninstalled & re-installed, however, that will have to wait until I can get the laptop back to the company we're working for.
    The community help window indicated the local help file to be 40Meg, but a search found no PDF that large on this machine.
    Is this PDF available for direct download & I'll just access it outside of the help screen if necessary.
    Laptop/program owner is in Canada, I'm visiting in Georgia & have an overseas flight on Wednesday...

  • HT1637 How to set gmail as my default email program?

    Hi, I have attempted to follow the instructions to change my default email program. However, when I open "mail" and go to general preferences, it gives me the options of selecting from an application downloaded on my computer. I want to use gmail as my default email program. But it isn't an ap on my computer, it's online. So how do I set gmail as my default email program? Thanks very much!

    If you mean set it in your browser, you can't As you already pointed out, gmail is not a program on your computer it is a web site. You need to get your gmail account into an email client, such as Mail, on your computer. Then set your default email client to Mail, which in effect will be the same as using gmail since Mail is set up with your gmail account.

  • How to set the user's Default joboptions directory?

    Hello Experts,
    When we installed Acrobat Pro 8.x on our Win XP Pro systems our systems were NOT in a Windows Domain.  At that time the default location for user-created/customized joboptions files was:
    C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
    where <Username> is the name of the LOCAL Windows user.
    A few years ago we migrated to a Windows Domain and converted our LOCAL users to domain users and disabled, but did not delete, the LOCAL user's account.  We did not remove the LOCAL user's Documents and Settings directory structure either.
    Our users now log into a DOMAIN rather than the LOCAL account.
    As a result of that process the user's Documents and Settings directory structure changed to;
      C:\Documents and Settings\<Username.DOMAINNAME>
    where DOMAINNAME is, of course, our Windows Domain Name.
    Now we are beginning to use Acrobat Distiller joboptions and I notice that when Acrobat/Distiller goes to save a user-created/customized joboptions file the default location has remained;
      C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
    which is NOT the user who is logged in
    Acrobat/Distiller should use the Documents and Settings directory of the user who is actually logged in which is;
      C:\Documents and Settings\<Username.DOMAINNAME>\Application Data\Adobe\Adobe PDF\Settings
    This anomaly has created some confusion and appears to have created a dependency of the old LOCAL user's Documents and Settings directory preventing us from deleting it.
    Question:
    How can we force Acrobat/Distiller to use the Documents and Settings directory of the logged in user (eg: the Domain user)?
    In other words, how do we set the user's default joboptions directory?
    Pointers/tips/and tricks are most welcome.

    if the user is the one running the program, you can always get the home directory using System.getProperties ("user.home");
    If you are trying to get the properties of another user, you could try using setProperties to change the user name first, before getiting the home directory, but it probably won't work because of the security manager. You could read the /etc/passwd file and parse the path out, but once again, the user of the code would have to have appropriate permission.

  • How to set group name as default value in People Picker in Infopath 2010

    How to set group name (shareoint Groupname)  as default value in People Picker in Infopath 2010

    Under the Developer tab in Infopath you can manage Loading Events, unfortunetly i dont have Visual Studio on this PC so i cant laborate, but i believe it's rather simple to figure out.
    Edit: Found a easier way, through Data > Default Values.

  • HT2506 How to set outlook as the default mail client for Preview

    When I try to us Preview to email PDFs the Apple Mail client is the default mail client that opens. I use Lion and would like to set Outlook as my default. Does anyone know how to do this? It has been suggested that you click command-P, select PDF and add Outlook there but there are no options to do this. I am stuck and would like some help. I am using outlook:mac2011 version 14.1.4 and Preview 5.5.1
    Cheers

    I did not find a way to change the target application for the "New Email with Attchment" service for files and folders. However, you can follow this instruction here to create ANOTHER service, that will use Outlook: http://www.officeformachelp.com/2010/11/create-a-service-to-attach-files-to-a-ne w-outlook-for-mac-mail-message/
    Hope this helps. Sebastian.

  • How to set Permissions for Mac HD from "No Access" to "Read only"

    Hi everyone! My friend's having a problem with her MacBook Pro. She accidentally changed the value of the Macintosh HD's privilege for everyone from Read only to No access. (See attached image for reference/guide). Seconds after, her Mac crashed. She rebooted her laptop, the Apple logo shows up with the usual scrolling week. Afterwards, the scrolling wheel disappears but the Apple logo is still there and it no longer proceeds to her login/desktop screen anymore.
    We already tried Repairing Disk Permissions (by pressing Command +R on bootup) and Repair Disks, rebooted, but it's still up to nothing. Unfortunately, she doesn't have a Time Machine backup.
    Is there a way to revert the changes even though the login/desktop screen can't be accessed? Is having the value "No access" on your Macintosh HD unsafe and will make you locked out of your system?
    I am looking forward to your fast and favorable feedback. :-)
    Thanks in advance!

    Is there a way to revert the changes even though the login/desktop screen can't be accessed? Is having the value "No access" on your Macintosh HD unsafe and will make you locked out of your system?
    There is currently no way to access the disk, no access means no access.
    Others may know better but I would backup the data on the drive, erase and reinstall.

  • How do you set your time/date default preference in pages?

    I am trying to set my default settings, anyone know how you change the default setting on pages?

    It gets it from the System.
    Otherwise you have to individually right click on the Inserted date in Pages to set it to what you want.
    Another alternative is once you have the Date the way you want it, to copy and paste it.
    Peter

Maybe you are looking for