HOW to Setting IP manually Nokia C7 WLAN ?

I have problem about to setting IP addres manually in NOKIA C7....
HOW to Setting IP manually Nokia C7 WLAN ?

Here are the steps:
settings>connectivity>settings>destinations>access point (add new ac. pt.)
automatically check for available access points? > yes
available access points> WLAN 1 network avail, Packet data available
select WLAN>belkin
asks for pre-shared key for WLAN> enter key
select destinations> Internet
Result: adds a new access point with the wlan name detected in the internet access point list.
The settings for this access point can be edited. In the advanced settings:
IPv4 settings > Phone IP addess and DNS addresses are automatic
IPv6 settings> DNS automatic
Proxy server address> none
Proxy port number > 0

Similar Messages

How to Setting IP manually Nokia 500 WLAN

HOW to Setting IP manually Nokia 500 WLAN ?
Moderator's notes: Moved to own thread.

Hi masmuhay,
Thank you for your post and welcome to the forums!
You can set up WLAN manually by following these instructions:
Go to Menu > Settings > Connectivity > Settings > Network destinations
If you have not yet set up your WLAN, select Access point to add a new access point. Give the set up wizard all the information it requires. Otherwise, just select Internet
Select your WLAN connection in the list (under Internet) and Options > Advanced settings > IPv4 (or IPv6 depending on your connection) to set up your IP and DNS address manually
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

How to Set/Configure Manual GPRS Setting with Asha...

Can any one help me with to set manual GPRS setting for Nokia Asha 200.
I want to change the GPRS setting, But there is no option for "Edit" or "New" (Configuration)
Thanks
Ricky

Hi framor,
Welcome to Nokia discussions board!
In order to set up an internet access point for your Nokia Asha 200, please follow the steps below:
Menu
Settings
Configuration
Personal Settings
Add (or add new)
Internet
Edit account name > input operator’s settings
Select “No” in use “preferred access point”
Access point settings
Bearer settings
Edit “packet data access point” > input operator’s settings
Back 4 X
Default config. Settings: select “personal configuration”, and click on “by default”
By default in apps: select “yes”
Please ask your operator to send you an SMS for automatic set up. If you have an issue connecting to the internet, you may set up the access point manually as described above.
For further support on internet acces on your device, please contact your operator.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
Astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

How to set Volume for Nokia N95(8GB)

Hey,
I own a Nokia N95 (8GB)
works rather well...
Some how i have managed to damage the Volume Buttons on the side of the phone and my volume for my music is set to the default "Volume Level"...(Which isn't very loud)
I need some help 'how to higher the volume without using those buttons on the side'
Please,
thanks Brad

Doh!
You're right! Connect the remote (Like the AD-54) and use the remote to control the volume.
Message Edited by el_loco on 03-Jun-2008 12:43 AM
640K Should be enough for everybody
El_Loco Nokia Video Blog

How to set to manual network selection

How do I switch to manual network selection

You choose it in the Settings.
See this page for step by step: http://www.apple.com/support/iphone/assistant/wifi/

How to set apn manually on i phone 4s

i need to set up apn settings manually on i phone 4s. please help

Note that APN settings will only appear if your carrier supports changing APN settings.

How do I set a manual IP address and manual DNS servers for my HP Photosmart 7525 Printer?

Cannot print. Had difficulty when printer was initially set up. Assstance from "happytohelp01" resolved the issue by advising me; a manual IP address andmanual DNS servers for the printer. I did not write down the information and now my printer is not working (it did work for about a month), now nada. I initially had problems connecting to the web server - now its doing the same thing, but I don't know what IP adderss and DNS to use. Please help if you can.
This question was solved.
View Solution.

Hi @LaceyNo1,
Welcome to the HP Forums!
I understand that you are wondering, how to set a manual IP address, and manual DNS servers for your HP Photosmart 7525 Printer. I am happy to look into this for you!
After some searching, I believe I have found the post, that my colleague @happytohelp01, helped you with. Located at this post, Re: Photosmart 7525.
Hope this is what you were looking for, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do I create an ACR custom lens profile if camera exposure can't be set to manual?

How do I create an ACR custom lens profile if camera exposure can't be set to manual?
I ask this question for the Nokia 808 PureView 41MP camera. It produces stunning image quality but exposure can only be controlled via EV +/- compensation. I need a lens profile to correct for vignetting to get even skies in panorama (which turn out stunningly otherwise). There is no profile for the Nokia 808 PureView I am aware of and I'd like to produce one.
Is the Adobe profile creator able to correct for varying exposure using EXIF or overlapping parts of the chart or background?
Or would the Adobe profile creator ignore EXIF if I use studio flash to enforce a constant lightning situation, even if shutter speed would vary (aperture is constant and ISO can be set constant, just not the shutter speed)?
Or did Adobe produce a profile internally they can share?
Thanks.

If you read the first post, this is the camera-app of a 41MP Nokia Pureview 808 camera-phone, so maybe someone could write a new camera app but the phone is Symbian OS which is dead, making that unlikely.
http://www.digitaltrends.com/mobile/the-skeptics-guide-to-nokias-808-pureview-five-reasons -41-megapixels-are-not-a-gimmick/
http://www.digitaltrends.com/mobile/the-nokia-lumia-820-and-lumia-920-too-little-too-late/
It would probably be easier for Adobe to rewrite the LPC to allow vignetting to be computed from a single shot of a blank wall without a target in the shot, than to have someone rewrite a camera app that allows manual exposure.
Another idea about how to get the phone to keep a constant exposure would be to experiment with putting darker and lighter objects in the field-of-view away from the target area to make the camera metering adjust things so it’s exposure is the same from one shot to the next. This would take some doing but should work, unless the LPC uses the part of the frame that doesn’t contain the checkboard target in its computations.
You’re basically varying the scene around the target so the camera takes the same exposure of the target each time.

How to set group contacts in nokia asha 305

how to set group contacts in nokia asha 305....thank u......

Can Some one Tell same group contact creation for ASHA 308 too?

How To Set The Nokia Music Player Media Equaliser?...

Hi, I am currently using nokia 6300 and I wish to know if anyone knew how to set the media equaliser settings to boost the music effect and sound quality. Plz help if you know, thank you...

14-Oct-2008 09:36 AM
icu44 wrote:
Hi, I am currently using nokia 6300 and I wish to know if anyone knew how to set the media equaliser settings to boost the music effect and sound quality. Plz help if you know, thank you...
Hi,
Go to Media> Equaliser and set your desired settings
You could also enable the stereo widening effect to widen sound effects.
=)

Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

If your ipod is set for manual update, how do you add playlists?

If your ipod is set for manual update, how do you create and add playlists to the ipod?

Thanks! I have several ipod books and they told me about manually updating songs but not playlists. That tutorial is VERY helpful. I assume that if you manually update the playlist, all the songs contained in it would have had to been previously manually updated to the ipod....to say it another way, updating the playlist does not transfer any songs. Am I correct?

Setting equalizer manually in nokia asha 305

Please tell me how to set equalizer in asha 305 music player manually?

There's no option to do it manually.. You can only use the presets provided.
Maybe you'll see it included in the next software update. Not possible as of now.

How can I sync a (one) song from my computer to my iPad without syncing the entire library even though i have my iPad set to manually manage music?

Whenever I try to move just one song from my iTunes library to my iPad, it will start syncing like 300 other songs randomly so I cancel everything. I have my iPad set to manually manage music but it still does that. And what's worse, I never get that one song I chose in the first place. The same thing with photos. I'll sync a photo and it starts syncing music as well. But at least I get the photo just fine.

Easy solution when on itunes simply go to the music tab and press on music library then browse what file which contains the music you want to be added same with photos

How to set the servlet context path manually in Tomcat web server.

I tested some servlets by putting them in the folder , which the tomcats examples application uses (ie Tomcat 4.1\webapps\examples\WEB-INF\classes\) and it appeared to be working fine.
I was calling the servlet like this : http://localhost:2006/examples/servlet/TestServlet
But when I installed my own WAR file in the server , the servlet is not working now. now the new location of my servlets is : Tomcat 4.1\webapps\MyApp\WEB-INF\classes\
and I'm trying to call the servlet like this : http://localhost:2006/MyApp/servlet/TestServlet
The error , what i'm getting is :
description :The requested resource (/MyApp/servlet/TestServlet) is not available.
Some body please tell where I'm making the mistake ? I believe this may have something to do with the servlet context path setting. If anybody has any idea , how to set the path..will be much appreciated.

Thanx for your reply , at first I was not using any web.xml(since not mandatory) but even after using the web.xml file the error is coming . Please have a look into the contents of the web.xml file and let me know if you find any problem...
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>TestServlet</servlet-name>
<servlet-class>TestServlet</servlet-class>
</servlet>
</web-app>
one more thing I would like to tell you here. I was just looking into the configuration of Iplanet web server..I found that , there are options to set the servlet container path (like : - Prefix: /servlet
Servlet Directory: /ecomm/iplanet/nes60/product/docs/container )
so from here I came to know that "container " is the folder where we should put our servlets and it has URI as "servlet" but yet I'm not able to find any option in the Tomcat Web server to set the servlet container to any different directory.
If you have any idea please let me know.

HOW to Setting IP manually Nokia C7 WLAN ?

Similar Messages

Maybe you are looking for