How to settle the expenses after AUC has been capitalised.

Hi All,
I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
Can you tell me how to create a new settlement rule in this case. It is Urgent
Regards
VK

Hi Vijay,
This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
You can then settle using CJ8G or CJ88 but CJ88 is a better option.
I think, I have answered the same query.
Regards
Bharat

Similar Messages

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

HT1212 how to enable my iphone after it has been disenabled?

How to enable my iphone after it has been disabled?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

How to reuse the process chain which has been deleted?

hi
guys
how to reuse the process chain which has been deleted?
your regards
suresh

if you want to "recover" the deleted process chain, try to check DEV / QAS / PRD. Maybe there is a copy still available
Or check the following tables in SE11: RSPCCHAIN / RSPCCHAINATTR
Good luck !

My computer does not eject the disc after it has been burned.

I understand that my computer is supposed to automatically eject a disc after it has been burned. Mine doesn't. Instead, I hear a "Plonk," which I assume is announcing that the burning process has been completed.
First of all, is it true that the disc is supposed to be ejected after the burn has been completed? Secondly, how can I restore that function?

Diane Wordsmith wrote:
To clarify...are you importing songs from a CD into iTunes, or are you burning songs from iTunes onto a blank CD? If it's the former, iTunes won't eject it...you'll just hear a chime or noise when it's done. If it's the latter it should eject.
For the second poster, it sounds you are importing. In which case, you will just hear the sound when importing is finished and you eject the CD yourself.
Just to make sure that I understand you correctly, here's what I did: Imported songs from website. They were in RealPlayer format. I then converted the song files into MP3 format, and put them into my iTunes music library. Finally, I put the songs in a New Smart Playlist, and burned them into a blank disc.
Given this situation, should I expect the disc to automatically eject when the burning is competed? If so, what do I have to do to get it to work properly?

HT201274 how to erase iphone 4s after service has been terminated

how to erase iPhone 4s content after service has been terminated

Man I don't know what else you can do.
you can log into icloud.com, but you can't erase the phone, because you aren't connected to wifi or cellular data.

How to check the sales order that has been PGI from a range of dates.

Hi SAP Gurus,
I have a query on how can I check the sales order that has been PGI from a range of dates in SAP?
Thanks,
Madelyn

Dear Madelyn
Go to VA05, give the date range and execute. List of sale orders will be generated. There you can see a tab "Status" in which, the status would be like
- Not delivered
- Partially delivered
So based on this, you can decide whether the order is still open or completed.
thanks
G. Lakshmipathi

How to get the times a document has been opened

Does somebody know if exists any kind of property attached to documents that can tell who many times a document has been opened? Or there is a way to know this in a different way?
Thank you in advanced.

Hi Pablo,
To obtain such statistical information wecan implement KM apis.. in the sense create repository services That can count the actual number of times a document is accessed
see this link for repository services
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to develop with the repository framework apis.pdf
Also refer to the following forum Looking for way to count a specific document hits(Not with Activity Report) for further assistance.
Hope this helps,
Regards,
Uma.

How to count the number of signals has been passed

Dear Sir,
I am developing an application to send a defined number of square waveform to DAQMx card. If the number reaches the given value, the generator stops sending, the application will do something else.
For example the attached code will generate a square wave has freq=1 and dutycycle=50%. If I want to send 3 waveforms to daqmx, in principle I can stop the loop after 3 sec. I was trying to use Elapsed time function to count time elapsed, for low freq, it sort of worked, but didn’t work at high freq. I think it should have easy way to handle it. I would very appreciate somebody can tell me.
Thanks.
Guang
Attachments:
waveformtest.vi ‏16 KB

Hi Guang,
In your example code, why are you setting the sampling rate to 20000 and the number of samples to be generated to 5000?
If you want 1 complete period of the square wave to correspond to one cycle of the loop, then the number of samples generated needs to be equal to sampling rate when the frequency is 1 hertz (as in your code).
Basically, 1 hertz = 1 cycle / second. So if the signal is being generated at 1 cycle (period) per second, and you wish to generate exactly 1 period per loop, the number of samples generated needs to be equal to the number of samples generated per second, such that samples are only generated for one second.
Does that answer your question?
Eric V
National Instruments
Applications Engineer
Certified LabVIEW Associate Developer
"I'm a Ramblin' Wreck from Georgia Tech and a helluva (NI Applications) Engineer!"

How to restore Browsing History after it has been deleted.

I need to restore the Browsing History of my computer. Once the history has been deleted, is it possible to find the information anywhere else on the computer?

Hi.
After create_column method you have to create cl_salv_wd_uie_text_view object:
data:
    " Variables para configurar los ALVs.
    lr_alv_config_table type ref to cl_salv_wd_config_table,
    lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
    lr_wd_table          TYPE REF TO iwci_salv_wd_table,
    lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
    lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
    lr_column            TYPE REF TO cl_salv_wd_column,
    lr_text              type ref to cl_salv_wd_uie_text_view,
    lr_header type ref to cl_salv_wd_column_header.
" Initialize variables
lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
if lr_lr_wd_table_usage->has_active_component( ) is initial.
    lr_lr_wd_table_usage->create_component( ).
endif.
lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
lr_alv_config_table = lr_wd_table->get_model( ).
lr_column_settings ?= lr_alv_config_table.
lr_table_settings ?= lr_alv_config_table.
" Delete Column.
lr_column_settings->delete_column( 'OBJID' ).
" Create column.
lr_column = lr_column_settings->create_column( 'OBJID' ).
create object lr_text.
lr_text->set_text_fieldname( 'OBJID' ).
lr_column->set_cell_editor( lr_text ).
" Change the header of the column.
lr_column->GET_HEADER( receiving value = lr_header ).
if lr_header is bound.
    lr_column->delete_HEADER( receiving value = lr_header ).
endif.
lr_column->create_HEADER( receiving value = lr_header ).
lr_header->SET_TEXT( exporting value = 'Objid Field' ).

How to view the income invoice which has been enter.

Hi all:
there is an income invoice which has been entered, how I can view it ? which T-code should I use?
Thank you very much

Hi,tcode mir4

ALV , How to add a Field after it has been deleted

Hi,
I am formating a ABAP Webdynpro ALV: I remove a field by using :
    l_value->if_salv_wd_column_settings~delete_column( lv_field_name).
How will I be able to add the field again ?
I tried the following :
    l_value->if_salv_wd_column_settings~CREATE_COLUMN( lv_field_name).
but getting a 'null' object reference in the following standard code :
if ls_column-r_column->r_cell_editor->visible_fieldname is initial.
Regards

Hi.
After create_column method you have to create cl_salv_wd_uie_text_view object:
data:
    " Variables para configurar los ALVs.
    lr_alv_config_table type ref to cl_salv_wd_config_table,
    lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
    lr_wd_table          TYPE REF TO iwci_salv_wd_table,
    lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
    lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
    lr_column            TYPE REF TO cl_salv_wd_column,
    lr_text              type ref to cl_salv_wd_uie_text_view,
    lr_header type ref to cl_salv_wd_column_header.
" Initialize variables
lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
if lr_lr_wd_table_usage->has_active_component( ) is initial.
    lr_lr_wd_table_usage->create_component( ).
endif.
lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
lr_alv_config_table = lr_wd_table->get_model( ).
lr_column_settings ?= lr_alv_config_table.
lr_table_settings ?= lr_alv_config_table.
" Delete Column.
lr_column_settings->delete_column( 'OBJID' ).
" Create column.
lr_column = lr_column_settings->create_column( 'OBJID' ).
create object lr_text.
lr_text->set_text_fieldname( 'OBJID' ).
lr_column->set_cell_editor( lr_text ).
" Change the header of the column.
lr_column->GET_HEADER( receiving value = lr_header ).
if lr_header is bound.
    lr_column->delete_HEADER( receiving value = lr_header ).
endif.
lr_column->create_HEADER( receiving value = lr_header ).
lr_header->SET_TEXT( exporting value = 'Objid Field' ).

Unable to open the database after it has been mounted. XE 10G

I am on Windows XP running Oracle 10G XE Edition.
After running a defrag & cleanup process, I have not been able to access any of the objects on the database.
A quick check
set lines110
col strtd hea 'STARTED'
col instance_name for a8 hea 'INSTANCE'
col host_name for a15 hea 'HOSTNAME'
col version for a10
select instance_name, version, host_name, status
, database_status, to_char(startup_time,'DD-MON-YYYY HH:MI:SS') strtd
from v$instance;
returns this
INSTANCE VERSION HOSTNAME STATUS DATABASE_STATUS STARTED
xe 10.2.0.1.0 DT8775C MOUNTED ACTIVE 03-DEC-2010 11:38:00If I use this command, it throws the following error.
SQL> ALTER DATABASE OPEN;
ALTER DATABASE OPEN
*ERROR at line 1:*
ORA-16014: log 2 sequence# 679 not archived, no available destinations
ORA-00312: online log 2 thread 1:
'D:\ORACLEEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_4JD5RZC0_.LOG'How can I fix this situation?
There are zero files in the
"D:\ORACLEEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\" folder.

Hi,
Check this out...
http://www.beyondoracle.com/2008/10/11/archivelog-ora-16014-log-sequence-not-archived/
Regards,
Levi Pereira

How to get a report after blocks has been removed in MRBR

Hi,
After removing the blocks manually in MRBR. We can see the invoices with X mark which had blocked for (price, qty or date) block in MRBR report.
But when we remove the block automatically (i.e release block automatically), if we again go and check in MRBR their won't be any blocks (which shows "X" mark) in MRBR report.
Can anyone suggest me is there any report which shows the invoices which got automatically released and the blocked reason (price / qty / date block).
Thank you,
Vinay

I'm 99.9% sure there is no such report or even possibility.
Regards,
Nick

Can someone tell me how to retrieve the itunes once it has been downloaded. By the way, the icon didn't appear on the desktop, Can someone tell me how to retrieve the itunes once it has been downloaded. By the way, the icon didn't appear on the desktop

is it possible to download itunes several times and it not be on the computer? if it is, can someone tell me how to retrieve it, please.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also, you should be able to redownload via iTunes on the computer. See that method included here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to settle the expenses after AUC has been capitalised.

Similar Messages

Maybe you are looking for