How to setup 30 ipads with apple configurator

I need to configure more than 30 ipads with same setting,
i try to use apple configurator to configure all ipads.
but it seems that not all the ipads restore as same as the reference one.
Anythings that we need to concern ?
Thanks

What gets changed?  Do some ipads restore correctly?
Robert

Similar Messages

  • Setting/keeping a static IP on iPad with Apple Configurator?

    Hey there
    We are just getting some iPads into our school and I have been configuring them with Apple Configurator which has gone pretty well so far.
    The problem I am having is that each of our iPads has to be assigned a Static IP address (for web filtering reasons) and each time I plug the iPad back in for a refresh or for a new install of an app the iPad switches back to DHCP and I have to manually type the static IP back in.
    This is rapidly become a pain the more iPads we get in, is there a way to set Configurator to either leave the IP settings alone or to set it so that it pre-fills the static IP settings?  I've looked through all the profile options and nothing jumps out!
    Any help would be greatly appreciated
    Neal

    Configuration profiles do not allow you to apply a static IP address to a device.
    Instead, it would be highly recommended to configure static IP addressing within the DHCP server itself. This would accomplish what you want without worrying about which proifle goes on what device, etc. Configurator can also export the MAC addresses to make life easier in setting this up.
    Right click the 'All Devices' in the Supervise tab, click Export Info > Device Information > WiFi MAC Address.

  • How to synchronize iPad with Apple TV

    Just got the Apple TV, can you synchronize the iPad with the Apple TV in order to stream the music and movies from the iPad to the TV?  Thanks for your help.

    Hi Audiotinker,
    Welcome to the Support Communities!
    The links below will show you how to setup your Apple TV using your iPad (with the iOS 7 software),
    Apple TV (3rd generation): Using an iOS device to set up your Apple TV
    http://support.apple.com/kb/HT5900
    And how to use Airplay to share the information on your iPad with the Apple TV:
    Apple TV - AirPlay - Play content from iOS devices on Apple TV.
    iOS: Using AirPlay
    http://support.apple.com/kb/HT4437
    iOS: How to use AirPlay Mirroring
    http://support.apple.com/kb/ht5209
    Cheers,
    - Judy

  • Should a 5GB back-up take 3 hours to sync to an ipad with Apple Configurator

    I'm setting up a cart of 22 iPads for my school.  I created an master and backup using Apple Configurator.  The size of the backup is between 5 and 6GB.  Had no issues creating the backup.  Supervised all the other iPads then began resorting them from the 5GB backup.  I'm on my 3rd hour of syncing.  Should it take this long?

    It's quite possible.  I haven't run into your exact situation, but have regularly been syncing about 1 GB to anywhere from 12-60 iPads at a time.  And the major time difference seems to be related more to the amount of data that is being synced instead of how many devices.
    With 1 GB it takes me about an hour.  So taking 3+ hours to sync 5 GB to 22 devices sounds reasonable to me.

  • HI, Problem when prparing Ipad with Apple Configurator

    Hi,
    I'm trying to use Apple configurator for my enterprise.
    But when trying toconfigure my first ipad, IOS correctly installed, but "Error with activation, please use itunes"
    Any Idea?
    Regards
    Bertrand

    Configuration profiles do not allow you to apply a static IP address to a device.
    Instead, it would be highly recommended to configure static IP addressing within the DHCP server itself. This would accomplish what you want without worrying about which proifle goes on what device, etc. Configurator can also export the MAC addresses to make life easier in setting this up.
    Right click the 'All Devices' in the Supervise tab, click Export Info > Device Information > WiFi MAC Address.

  • Resetting Disabled iPads with Apple Configurator...

    I'm having an issue trying to get iPads reset via Apple Configurator that have been disabled because the student has forgotten their passcode. Apple Configurator just says I need to unlock the iPad before I can reset it. What do I need to do as I work around? I have 5-10 iPads having this same issue.

    Have they logged into an iTunes account, or an iCloud account? If they have logged into an iCloud account, there is nothing you can do personally, you'd need to contact Apple.
    Here is some information I found previously about calling Apple and removing Activation Lock from an iPad
    "Streamlined email process for removing activation lock
    AppleCare has announced a new process to assist institutions with returned devices which may be activated locked.  For customers who experience this for the first time please call AppleCare at 800-800-2775 so that the process and needed documentation can be explained.  After the initial call customers can email with the required documentation for all Activation Lock Removal requests."

  • Restoring iPad with Apple Configurator

    I have been using Apple configurator to maintain a classroom set of 30 iPads.  We just finished our first use in a class where we had to manually download courses and books onto each iPad (these are being loaned out to different classes).  While I know configurator is unable to put on iBooks, restoring to a clean backup (with all iBooks and Courses deleted) doesn't get rid of the books and associated data (like highlights).  Is there a way to completely wipe the iPad to factory settings?  Or does the ibook/iTunes U course data need to be deleted on each device?   Any ideas?

    create and deploy a backup that doesnt have epub metadata in it.
    if you have a restore image with the same UDID as the device and the one of its previous backups, the problem is you have itunes checked to sync books when you imported the backup into config'erater.
    if you import a backup of a device with no .epub location data, then cant put them on there
    you may also be able to go into itunes and delete the appdatastore content for ibooks, ensure the sync option for ibooks is unchecked, construct clean backup, import, deploy.
    sent from my ex_spy_guy

  • How to setup iPad with HP3056A

    I just purchased new iPad and want to set up HP 3056A printer. According to HP this printer has AirPrint capabilities. I do not have a working computer. I have wireless Internet in my home. Can someone please give me some direction of where to start. Also not sure what operating system it is using.  It is the latest edition iPad with cellular 16 storage. This is my first iPad.

    Thank you but the link has a list of HP AirPrint printers and it does not included mine, I knew that already. But the HP specs page says it is good for AirPrint??? My main question is how to install this or any printer for my iPad without a computer. I may return this printer model and purchase one on the list but if I can't install any printer without using a computer I need to know so I don't waste my time buying another printer. I may just return the iPad and buy a windows laptop.

  • Setting up iPads with Apple Configurator

    Hi. A building shall buy several iPads for the new owners of the apartments. This building shall have a proper domotics app and surveillance apps.
    I want to set up these iPads, which the owners shall keep for them, but these apps should not be deleted... The point is: Could the owners keep and use their iPads and install the apps they want plus the apps of the building not to be deleted? Or me, as the "Installer", do I have to allow them to do so?
    Thank you!

    There are three ownership models:
        *     Personal
        *     Institution
        *     Layered. combines personal & institution.
    Watch this apple video on layered ownership.  It education based, but that's OK.
    http://www.apple.com/education/resources/videos/#ios-layered-ownership
    "Apple Configurator makes it easy for anyone to mass configure and deploy iPhone, iPad, and iPod touch in a school, business, or institution."  Limited to Macs
    http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
    http://www.jamfsoftware.com/
    MDM  -- moble device management 
    MDMs
    Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
    For a comparison see this page:
    http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
    Airwatch
      http://www.air-watch.com/
    Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
      http://www.meraki.com/products/systems-manager/
      https://discussions.apple.com/thread/4067210?tstart=0
      Good howto by Sergio Sosa.
      https://discussions.apple.com/thread/2594001?start=15&tstart=0
    MobileIron
      http://www.mobileiron.com/
    Profile Manager by Apple
    Zenprise
      http://www.zenprise.com/

  • How to use iPad with apple tv (1st gen) mirroring

    Can appletv 1st generation be configured with ipad2 to do mirroring??
    I can't seem to figure out where to set that up..
    Any help would be appreciated.

    Disregard...just realized I need to buy an appletv 2 in order to do mirroring.....that really *****!
    I like the 1st gen and really didn't need to upgrade to a new one.
    If there is some other way to do mirroring from my ipad2, please let me know before I drop more $$ on Apple product.
    Thanks

  • How to pair ipad with apple tv?

    I just want play my music and videos on apple tv but for some reasons apple tv don't recognize the ipad from 5ft away. please help me to pair them.    thanks

    Assuming they are both connected to the same network, you should be able to stream videos just using the AirPlay icon. Just start playing the video on the iPad and tap the AirPlay icon, as pictured. Keep in mind this is a networking feature, not a bluetooth option. In fact you may have to turn off bluetooth.
    http://www.apple.com/ipad/features/airplay.html
    If no luck, follow the troubleshooting in this guide.
    http://support.apple.com/kb/HT4437

  • How can I import photos from iPod that is supervised with Apple Configurator?

    I have configured a set of iPod Touches (and iPads) with Apple Configurator. User can take photos. But when the iPods are attached to a PC or Mac (including the Mac they were configured on), no pictures are visible or downloadable. The photos are visible in the Photos app on the iPod. What's happening?

    Anthony,
    I have found a workaround that just worked for me with iPads,
    Connect the iPad to the computer that supervises it, take screen shots (home key and off key pressed together) of the photos as they are displayed in Photos on your iPad and then they will be seen when you launch iPhoto on the host computer.
    It takes some time, but may be worth it, I just took screen shots of about 70 photos and they are now in iPhoto so I can export them now and use them.
    It took me 15 minutes.
    Hope this helps, Darryl

  • HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

    HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/  Thanks

    Sorry but I don't know anything about this.  But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

  • Can I reconfigure iPads using Apple Configurator after previously being setup with iTunes?

    Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes?
    Will VPP Codes be able to be reused? Can I restore to a backup made in iTunes?

    Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes?  Yes.
    Will VPP Codes be able to be reused?  From iTunes - No.
    Can I restore to a backup made in iTunes?  You can back up an iPad that was set up in iTunes in Configurator and use that as back up in Configurator.

  • Apple Configurator 1.3.1 crashes.  I haven't been able to prepare any IPad with the configurator.

    New to this process and we are setting up bays for IPads in an education environment.  I'm able to load a profile (unsupervised) onto an IPad but as soon as I choose supervise and prepare the IPad the Apple Configurator crashes with the error message below.  I'm not sure how to proceed from this - running OSX 10.7.5 and configurator 1.3.1.  The Mac book pro was bought to supervise the IPads and not used for anything else.  Have reinstalled configurator without any luck. Any help would be appreciated. 
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    274
    *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'ACUUnpackFirmwareOperation cannot fail the operation and without setting an error'
    *** First throw call stack:
              0   CoreFoundation                      0x00007fff82091f56 __exceptionPreprocess + 198
              1   libobjc.A.dylib                     0x00007fff8e4f1d5e objc_exception_throw + 43
              2   CoreFoundation                      0x00007fff82091d8a +[NSException raise:format:arguments:] + 106
              3   Foundation                          0x00007fff8971a71f -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 169
              4   Apple Configurator                  0x0000000105795563 _mh_execute_header + 701795
              5   Apple Configurator                  0x000000010579678b _mh_execute_header + 706443
              6   Apple Configurator                  0x0000000105756707 _mh_execute_header + 444167
              7   Apple Configurator                  0x0000000105757904 _mh_execute_header + 448772
              8   Foundation                          0x00007fff896aa912 ____NSOQSchedule_block_invoke_2 + 124
              9   libdispatch.dylib                   0x00007fff8a60da82 _dispatch_call_block_and_release + 18
              10  libdispatch.dylib                   0x00007fff8a60e961 _dispatch_worker_thread2 + 255
              11  libsystem_c.dylib                   0x00007fff87bd33da _pthread_wqthread + 316
              12  libsystem_c.dylib                   0x00007fff87bd4b85 start_wqthread + 13
    objc[179]: garbage collection is OFF
    abort() called
    terminate called throwing an exception

    Boy, I sure hope you found a solution to this.  THe exact same thing happened top me, yesterday.  I thought it was the updates to the iTunes store and the release of iOS 7.  However, today, it is still happening.  I was partway through setting up iPads for a 1:1 initiative.  The first 11 worked fine, then the strangeness started.    Most of it seemed to relate to the iTunes store, but the worst part is exactly as you describe, and I have the same setup.   MacBook Pro specifically to manage the iPads.  Configurator crashes whenever a device is hooked up to "supervise" even if it is fresh out of the box.  The details on the crash also show the "Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'ACUUnpackFirmwareOperation cannot fail the operation and without setting an error'"
    Oh, did I mention I have to have the iPads set up next week?
    HELP!

Maybe you are looking for