How to setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1

How do I setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1?
I see screenshots where there are boxes to 'enable' guest network but these simply do not apear on the Wireless tab in AirPort Utility

I now have a guest account, thanks to you!
I did the factory reset and was able to set up the guest account.
There were 3 problems, all of which I was able to solve.
The first problem was connect to Ethernet, which I selected by WAN port, as shown in the first screen shot. This page used to read just Ethernet and the Bridge Mode.
The second problem was whether to share a range of addresses or share a public IP address. I selected share a public IP address as shown in the first screen shot. I had tried the range of IP addresses in my earlier attempts, the ones that failed. Hopefully this will have no effect.
I have forgotten what the third problem was - only excuse is a few too many flavored drinks. I didn't have any problems solving it though.
What is really weird is I can log on to Guest and use on my iPad (first generation), my wife's iPod Touch (third generation), and my wife's 2011 MacBook Pro. I can't log onto Guest on my 2008 iMac, even after a restart. I get the image below.
Since I don't lug my iMac around a lot and it is connected by Ethernet, while my little make it right brain says figure this out, I am not going to worry about it.
Thank you again for your time and patience in helping me solve this.
Eric Root

Similar Messages

  • How can I use Guest network when my internal server provides the DNS?

    How can I use guest network when my internal server provides the DNS? The help article TS4505 tells me to enter an external DNS server, but I believe I can not configure my network that way...

    Apple assumes that you will be connecting the Time Capsule to a simple modem....and.....that the Time Capsule is configured as a router to provide DHCP and NAT services for the network.
    The Guest Network cannot be enabled correctly unless the Time Capsule is in charge of DHCP and NAT services on the network.
    Another way of saying the same thing is that the Guest Network will not operate correctly if the  Time Capsule is configured in Bridge Mode or DHCP Only.

  • How can I retrieve my password when the retrials email was not recoverable? I also can't use or pass the othere menace of recovery? Not being able to pass or answer the security questions?

    How can I retrieve my password when the retrials email was not recoverable either? I also can't use or pass the othere means of recovery? Not being able to pass or answer the security questions?
    I created a new ID but never being able to update the iTunes that were purchased/saved using the old id?
    I can't also delete.

    Hi Kazmania89,
    Welcome to the Support Communities!
    If you require additional assistance with this, click on the link below for guidance:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Once you are able to gain access to the old Apple ID, this article may be helpful:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device?

    First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
    Mac:  iTunes for Mac: How to copy purchases between computers
    PC:  iTunes for Windows: How to copy purchases between computers
    Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch. 
    Cheers,
    - Judy

  • Customizing Slideshows - how do I add an image in the text box that only shows up for a specific ima

    Customizing Slideshows - how do I add an image in the text box that only shows up for a specific image and not in every text box?

    Can you maybe provide a screen shot to further explain your question?
    Julia

  • How to upgrade to aperture 3.5 when the app store does not show the update. I did buy aperture 3 on DVD not thru the app store. what to do?

    I can not open aperture databases anymore as osx10.9 keeps telling me i have opened it with a newer version, which i have not but i understand from other discussions that thru the upgrade of iphoto osx automatically thinks that you have opened with aperture 3.5. the app store does not show me the update as i have not purchased the program thru the app store but on dvd. what to do?

    If you are running MacOS X 10.9 and Aperture is installed in your Applications folder and simply called Aperture, not Apertre 3 or something, the AppStore should be showing you the update.
    Have you already updated to Aperture 3.4.5 from the Support page  Aperture 3.4.5?
    Try to update manually to 3.4.5 and then reboot and sign again into the AppStore with your AppleID and look at the Update page.
    For some forum members it helped to set the main system language to English U.S. to make the update finally show.
    Léonie

  • What does it mean when the dialogue box that pops up when you want to bookmark a site says " Remove 3 bookmarks?"

    Using Firefox 17.0. When I click on "Bookmark a Page" under the star in the dialogue box that appears it may say "Remove Bookmark" or "Remove 3 bookmarks." What does it mean - will it really remove three bookmarks?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Hi. Does anyone know how to delete my guest network from the list of network choices that everyone in the neighborhood sees when picking a network?  Followed helpful suggestions on this site to delete the netwk but it still appears.  Appreciate any help!

    Hi.  I'm trying to make my guest network disappear from the list of network choices that appears to everyone in the neighborhood.  Even though I followed the great suggestions on how to delete the network, it's still appearing in the list that everyone sees.  It has my name and would prefer to get rid of it.
    Please help!  Many thanks!

    Thank you for not only the tip but also especially the research showing that for anybody other that those using Wi-Fi for the first time the network wouldn't disappear.  I wanted it to disappear for everyone so.....I finally solved it by resetting the Airport Extreme to the factory settings and starting over from scratch!  It worked! Yay!!!!!
    So, for everyone that has had this problem (and I've read many of the same complaints in different places on the Internet), you must go into Airport Utility and check the box stating that you want to reset it to the factory settings.  Do not do it with a paper clip and the reset button on the box; I tried that first and it did not work.  You must reset it via the Airport Utility.  Then just start over and you will have the choice to NOT check the box to Enable Guests.  If you want to enable guests, just be sure not to use your name or you're back to the same problem. Apple is so great with everything...wouldn't it have been so easy for them to just put this in the manual somewhere?????  Thanks for all your help.    Hope this helps others!

  • How to setup a guest network on an airport extreme?

    I just bought the new airport extreme and I havent been able to find the prompt that allows me to create a guest wifi network.  Can anyone help?
    Thanks,
    Javier Vazquez

    I just bought the new airport extreme and I havent been able to find the prompt that allows me to create a guest wifi network.
    The article that hanuolaohu posted is interesting, but it never tells you that the AirPort Extreme must be connected to a simple modem to allow the Guest Network feature to be enabled.
    If you have a "gateway" or "modem/router" device, this acts as another router on the network....not as a simple modem...so the Guest Network tab will not appear when you try to setup the device.
    So, first we need to check on the device that you call your "modem". What is the make and model number of this device?

  • HT5132 The pop up appears when I open aperture, I do not have a mobil me account with photos and the sync never seems to start and the dialogue box will not go away. How do I get rid of it?

    When I open aperture a pop up appears that tells me that my mobil me photos will be moved. When I click OK, nothing happens and I have left it for hours. I can not get rid of the pop up and I can not get out of aperture. I have to force the computer to shut down. Any thoughts?

    Quit Aperture - force quit if necessary (or try this:
    If Aperture is unresponsive, how to avoid force quitting?
    Launch Aperture again. When the panel appears, press the "Learn more" button, not o.k.
    Then use the "File > Web Accounts > Manage Web Accounts" menu entry from Aperture's main menu bar and remove "MobileMe" from the list of accounts in the accounts pane by pressing "-".
    If the above does not work, disconnect the internet (Wi-fi, Ethernet, whatever you have), before you launch Aperture again. Now the panel should no longer appear.
    Also sign out of MobileMe in the System Preferences Mobile Me tab, to stop the panel to appear again.
    Good luck
    Léonie

  • How to remove credit card information when the none button is not available?

    The None button doesn't show up when I edit my billing information. Help?

    Maybe:
    How do I remove my credit card...: Apple Support Communities
    How to remove credit card details?...: Apple Support Communities
    Some uses have said they could not.

  • How do you add a device when the sync box dosn't have the ADD DEVICE button?

    I have a new laptop running windows 7, I downloaded firefox7 and on my old laptop, running windoes XP, I went to the sync box. there it told me how to transfer all my info to my new laptop. but on firefox 7 there is no ADD DEVICE button in the sync box.
    so how can I sync my laptops?

    You can enter the account name (email address) and password and the Sync key.
    * Open "Tools > Options > Sync" or "Firefox > Set Up Sync"
    * Click "Set Up Firefox Sync" to go to "Firefox Sync Setup"
    * Click "I already have a Firefox Sync account" : Connect
    * Click "I don't have the device with me" at the bottom

  • Family Sharing setup on both phones but the purchased songs do not show on member's device

    So I set everything up with both my phone and my wife's iPhone.  All the devices are updated to iOS8.  I set up Family Sharing, my wife accepted it.  The family calendar works perfectly.  BUT the music in (iTunes Purchased) that are listed on my phone do not show up in the my wife's phone. Everything is accepted but when I go to Music in her phone, I do not see the items I have purchased. I can see the 155 songs she has purchased, but I do not see my 255 songs that I have purchased and appear on my phone.  Seems like I'm missing something here.    Any thoughts ?

    Also, when I go to Purchased in the iTunes Store I do not see any family member (wife) for me to browse their collection.

  • On the network tab the override box is not checked to override automatic cache to 1024mb is it better to check the box or not?

    if i check the empty box to override the cache to 1024mb would the internet run faster or what would it do?

    I was having the same problem and was looking for solutions when I came across this posting. Disabling GoodSearch solved the problem for me. Hopefully GoodSearch will update soon and resolve the issue permanently so I can use it again.

  • Older airport express not showing up in airport utility - want to extend network

    I just bought a new Airport Extreme so that I could use my older Airport Express to extend my wireless network. The Extreme is working fine. Set up was easy.  Airport Utility isn't finding my express - no matter what I do - and I'm at a total loss. Please help me find it and then extend my network. Thanks!

    If you decide to keep the new AirPort Extreme, you will need  a newer "n" version of the AirPort Express if you want to try to extend the network using wireless only.
    A "refurbished" Model A1264 would work, but it will only extend one band from your dual band AirPort Extreme.
    A "new" Express, Model A1394 would be recommended since it will extend both bands.
    You do have the option to use the old AirPort Express, but that would involve using a permanent wired Ethernet connection between the AirPort Extreme and AirPort Express.
    Unfortunately, it is not possible to predict wireless performance in advance when the signal must pass through numerous walls and or a ceiling. For that reason, it would be a good idea to understand the store's return policy in advance if you want to try a new or refurbished Express.

  • The click boxes are not showing up right

    The click boxes such as on surveys or any thing is not showing correctly and therefore some sites says the I think intuit is not working. I'm not sure if that is correct as I forgot to write it down.
    Thank you for your help.

    Hello SAPPHIRE49,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    thank you

Maybe you are looking for

  • Is it possible to extract the DN from a certificate?

    Is it possible to extract the DN from a certificate? During the SSL Handshaking process, does ORACLE read the certificate, write the certificate properties to some V$ table or enviroment variable?

  • Creating AIR/Web Apps. with XML & E4X using AS3

    Needing tips using AS3 with XML/E4X to make my project work over the server: 1) Here I'm having trouble trying to create a component with a 'GOOGLE MAP' with the user being able to input their location for directions with once submitting the get dire

  • To Display the Sales docoment Number(VBAk-VBELN) in Business Workplace

    Hi, I want to display the sales document number(ie VBAK-VBELN) of Credit blocks orders in the Business Workplace inbox. I am able to display the message called "Sales Order Block for Credit Checks ".  I have done the following customizing. 1. Partner

  • It is not possible to verify the connection with the instance OID

    The infrastructure is already installed. The access to the site of administration of the APPLICATION SERVER are usually working. Now, i am installing COLLAB STORAGE INFORMATION. In the window ORACLE INTERNET DIRECTORY, he requests the information: HO

  • RFBILA00 Alternative account number Missing

    Dear All, I  assigned operating general ledger accounts to financial statement version, and in GL master data, i have already assigned alternative account number to them.  but when i run RFBILA00 report, i turn on "accounts with zero balance" " ALV g