How to setup a HA service for RAC?

I have a RAC. It has 2 nodes: node1 and node2.
I want to setup a service and make this service only based on node1
only node1 is damaged, then this service will failover to node2
I checked related knowledge at internet. All the information is related to load balance, not for high available.
For example, below service is load balance:
srvctl add service -d HIC -s CMTLB -r 'HIC1' -a 'HIC2' -P PRECONNECT -e SELECT -x TRUE -j SHORT -B SERVICE_TIME -m BASIC -z 180 -w 5
Now I want to setup a high available service, how to do?
one more question, I should run "srvctl add service" by user "oracle" or "grid"?

user8710670 wrote:
Thanks a lot for your information.
Yes, I think my command is good to setup a service.
But this service is a load balance service.
Through this service, all the connections will be put at both nodes.
Currently, my requirement is that I need a service
Through this service, all the connections will only be put at one node,
until this node damaged,
then the connections are put at another node
Do we have a way for this case?
Your service will not run on both nodes. It will run on one and failover to the other. However, a better way would be to define it as a policy manged service, which may be what you are thinking of.

Similar Messages

How can i config Oracle Services for Microsoft Transaction Server in 9.2

how can i config Oracle Services for Microsoft Transaction Server in 9.2

There's nothing to configure on the client side. On the database side you just need to run a script once to setup an ORAMTS admin account and some other infrastructure.

How can I get a service for new powerbook 15" 1.67 screen?

I would like to know how I can get a service for my brand new PB15" screen.
Today I have read an message on the Korean apple forum that New unit of 15" 1.67 doesn't have any line problem.
So, I really want to know whether it is true or not.
If it is, Can I get an exchange for my new 15" 1.67 in India?
Could you help me Apple?
I bought it in Korea 15,Nov, 2005 and Now I am in Mumbai India.
There is a apple international Mumbai in India.
I have a 1 year world worranty.
If the new unit doesn't have any line problem, It means that mine has a problem.
Now I am falling in love with powerbook 15" 1.67 which is my first Mac in my life except line problem.
How can I get a service for it.
Please Help me.

Yes I have read of other reports from people saying theirs are fine. I am really looking forward to purchashing one but I do not want to take a 2000 dollar chance that I might end up with a bad screen. I am still waiting for apple to make an announcement. I have also begun seing reports on some "news like" websites but not really the major ones.

How to setup a company code for material management

Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DIL

Hello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri

How to setup a global artwork for a TV Show

Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks.
ie. when watching the Tv Shows (library on iTunes) I would like to see the global artwork of the Tv Show that is different of the other 45s episodes contained.
Bye, Roberto.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to setup the Airport Extreme for PSP?

Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
PowerBook G4 Mac OS X (10.4.3)

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

How to setup the airport extreme for window xp

How to setup the airport extreme for window xp

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

How can I show icon Services for Object in PA30 Infotype 0019

Hi guy.
How can I show icon Services for Object in PA30 Infotype 0019 ?
This icon display in some infotype example infotype 0024(Qualifications).But I wanna use in Infotype 0019.
I don't wanna use menu "Assign facsimile".
Best regards.
Chutima.

Sorry - should have said I'm using JDev 10.1.3.0.4 with JSF & ADF BC.

How to setup gmail push notification for my iphone 5?

I'm using gmail. Prompt respond for mails is very urgent for me.
How to setup gmail push notification for my iphone 5?

I switched from a BB to an iPhone a few days ago and I knew I was going to miss the QWERTY keyboard but then I also discovered that my GMail doesn't 'push' to my iPhone. I was used to 'push' for all mail accounts on the BB. I also missed being able to personalize text, email, and phone tones for individuals.
I tried the Gmail app for iOS and it does deliver Gmail to the iPhone app quickly but the text is tiny and when it is a web page it's almost impossible to read.
So, I have worked out a kludge to get around these problems.
I added my exisiting Gmail account to the iPhone.
Hotmail does push to iOS 7 so I created a Outlook account (could be hotmail or Live) using the web browser.
I added the hotmail account to the iPhone. I basically use this to give fast notification of important emails on my iPhone.
On my macbook email client I created a rule that 'redirects' incoming mail to the hotmail account. The 'Redirect' is important since the email will show up in the hotmail account on the iPhone as coming from the original sender and you can then respond to the original sender from the iPhone, though the sender will see it as coming from the hotmail account.
The other downside is that you will get a second copy of the email in the gmail inbox on the iPhone, probably 15 minutes later.
If you don't want all of the mail being redirected you can create a 'redirect' group in the Address book and then adjust the rule in Apple mail to only redirect the mail to the hotmail account if the sender is in the redirect group. You can add and delete contacts from this group depending upon which ones you consider to be important. You will still get two copies of the email on the iPhone, one in the hotmail inbox and one in the gmail inbox.
You can prevent this from happening temporarily by turning off, but not deleting, the gmail account on the iPhone. You could then edit the emails on the Apple email client before turning the gmail back on in the iPhone.
And finally if you use the VIP feature in email on the iPhone you can create a list of VIP contacts and then assign a different notification sound for the VIP's. So in effect important contacts mail will be redirect to the iPhone for quick notification and very, very important contacts will have a different notification sound.
I'm basically using the Hotmail account as a notification tool and basically delete all the emails in it since the original copy will be in the gmail account.
And best of all it's all free, except for the bandwidth.

How can setup the outgoing email for ipad2?

How can setup the outgoing email for ipad2?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

How to setup the IM app for google talk 5800

How to setup the builb-in IM app for gtalk?

The Build-In IM can be used only with your Mobile Operator's IM service. You can use Fring (www.fring.com) or Slick (http://www.lonelycatgames.com/?app=slick) for Google Talk.
Nokia 5800 Xpress Music + 8 Gb Nokia microSD class 6

How to setup IOS DHCP server for redundancy?

Hi
The customer has 2 core (cat6). Plan to enable DHCP service on them for IP phones.
How to setup them so there is a redundancy for DHCP service?
Thanks in advance!

Setup two routers and have them split the range of addresses that they lease out. The pools should be non overlapping.

How to setup a HA service for RAC?

Similar Messages

Maybe you are looking for