How to setup a one-time vs. monthly condition type for billing?
Hi SD Gurus,
Our customer contracts invovle a fixed monthly charge that needs to be billed every month for the duration of the contract.
I've set this up successfully through a condition type. My condition type is setup as periodic billing.
Our customer contracts also involve a fixed one-time charge (e.g. setup fees).
My requirement stipulates that when our sales department creates a sales order, the system should automatically populate the one-time charge along with the the monthly charges.
I'm having trouble with this requirement. I would like to know how I can configure the system so that the condition type shows up only for the first month. In my configuration, the one-time fee shows up for all the months.
Thanks!
Edited by: Jamal Kazmi on Jun 4, 2009 9:55 AM
user8710670 wrote:
Thanks a lot for your information.
Yes, I think my command is good to setup a service.
But this service is a load balance service.
Through this service, all the connections will be put at both nodes.
Currently, my requirement is that I need a service
Through this service, all the connections will only be put at one node,
until this node damaged,
then the connections are put at another node
Do we have a way for this case?
Your service will not run on both nodes. It will run on one and failover to the other. However, a better way would be to define it as a policy manged service, which may be what you are thinking of.
Similar Messages
-
so i got a new ipod touch 4th generation and about three days after the internal speaker stopped working. i was dumb and didn't return it because it worked again for about a month and then stopped. and i was pass the 90 day return time. so i am screwed and now the speaker will work for about 10 minutes every two months so it isnt that handy to me. i know it isn't blown because it will randomly work and when it does i hope it doesn't turn off. i have seen allot of things about this and i think that it is a apple ipod think because allot of other people have this problem. so i think it is great that apple has made these products it is just sad that u pay 200$ for something that breaks after two months. i think they should do a free replacement for any product that has a malfunction because it isn't my fault it is broken and then they expect u to pay another 75$ so they can take it just to give u a refurbished one that will do the same thing.
Walk it into the nearest Apple Store, politely describe your issue and see what they say there.
-
How should I do if I paid monthly payment twice for a month. One is by Auto payment and the other is by hand... Is it possible to get refund? don't I need to pay for it next time?
I know a couple others that waited for two billing cycles but it will come back as a credit on that account.
-
I need to know how to do a "one time reprieve"
I logged onto my friends account with them on my computer, and accidentally authorized it with my computer. I can't download anything from my account for 90 days. Help me!!! Please someone tell me how to do the "one time reprieve"
THANKS!You can't do that yourself. Click here and ask the iTunes Store staff for assistance.
(126627) -
How to identify a One time Customer in Oracle Apps AR
Hello,
How to identify a One time Customer In Oracle APps AR?
Is it possible to find out how many number of transactions a Customer does so that, if the number of transactions is 1, then that customer is a one time customer. or else he is not?
Thank you
BobHi Bob,
to my knowledge, i cannot recollect a seeded report from oracle that could meet your requirement. You can try running the Transaction Register report from your Go live date till now, so that system would generate a list of all the Invoices along with the Customer Name, then you could export this to excel and perform a sort, filter and groupby to get the desired result ....
However if you are a person with technical expertise, check the table RA_CUSTOMER_TRX_ALL this stores all the transaction related information ..... you can select TRX_NUMBER, BILL_TO_CUSTOMER_ID from this table and perform a count by customer...(I am not sure on the syntax and usage of sql functions) you can get the desired results ...
Also in future, while creating a new customer if you know well in advance that this customer is going to be an ONE TIME CUSTOMER, there you could capture that information in any unused field on the customer configuration or can enable a DFF and capture this information, so it becomes very easy to identify such customers or have a report built based on it...
I assume there is an objecive behind trying to find One time customers or customers with a single transaction history ... are you planning to disable/end date/inactivate such customers ....?
Regards,
Ivruksha -
How do we create One-Time Material?
Hi all
I want to know how to create a One-time material, i.e. with out material master.
Actually we sell services (not physical goods) so every time the sevice description is created as a one time material. They say it is possible to create a One-time material on the VA01 screen itself just like we create sold-to party and choose an item category for the item in the same screen. Please help
Best RegardsHi,
I got carried away with your indication for a one-time mtl.
may be you can create a service material and use it every time to create these orders. In the Material description field, you can still change it in the SO, while creating the SO. However, you need to take the help of your technical team to modify the Billing form attached to your output type to pick up the material description from the underlying document and not from master data. I think this is possible and hopefully, will reolve your problem.(?)
pls update us with your effort,
Thanks,
Siva -
How to setup a variant to do full repair request for 0Material?
How to setup a variant to do full repair request for 0Material?
Thanks
YorkHi,
Do you mean to set up a varinat in process chain?
Regards
Srini -
How long should an initial time machine backup of tack for 675 GB?s with a USB external hard drive?
Not much faster than 40 GBs-60GBs per hour. So, minimally, around 12 hours.
-
How to stop this multiple entry against same condition type in pricing
My client is using manual condition type for the basic price "ZBPR". Now system allowing multiple entry against this condition type in the pricing screen during order creation i.e in the first line if we put ZBPR 00 , in the second line system allowing to put another value against same ZBPR say for example 2000 & doing all subsequent calculations on the basis of 3000 .which is not at all acceptable by my client .Please suggest how to stop this multiple entry against same condition type
You have to make the condition type as Mandatory and not manual.
If you are entering many condition records of the ZPR0 then the latest entry will be taken for further processing for subtotal rebate and total price.
For all the other entered condition records will have yellow traffic signal which is not active.
you can assign a routine with the help pf your abaper...
In the Transaction VOFM define a requirement such that
you condition type takes value only one at the time of order entry.
regards,
Amlan Sarkar -
Labview How to specify 1d array of clusters as data types for variant to data
Hi, I'm new to labview. Can anyone tell me how to specify 1d array of clusters as data types for variant to data?
First of all, you should be sure that there is such a data type within the variant; otherwise, you will run into errors.
I recommend you to create the cluster and create a type definition from it. Then drop an array shell from the array palette and drop the cluster type into that array.
Connect that constant to the data type input of the Variant To Data function.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
How to find condition type for a particular material document no.
hiiiiii
How to find condition type for a particular material document no.Hi
Condition types are maintained at PO level
Take the EKKO-KNUMV and pass to
KONV-KNUMV field and take the different condition types values from KONV
Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
see the table T685 for different condition types.
<b>Reward points for useful Answers</b>
Regards
Anji -
How to find condition type for a material???
How to find condition type for a material??
Hi Suman.
Refer the following
tcodes:http://www.tcodesearch.com/sap-tables/search?q=condition+types
and http://wiki.scn.sap.com/wiki/display/Snippets/Get?original_fqdn=wiki.sdn.sap.com
Please search for condition type with pricing condition/pricing procedure.
Regards,
Kannan -
How can i get different Condition Type for third-party Purchase Order?
Hi, experts,
for standard PO my Schema works well. now I want to get a different condition type for third-party purchase order. I try to extend field catalog (Pricing Purchasing). The Field PSTYP exists already. However, it is not provided in the field catalog.
How could i do?
Thanks
ReneHi Rene,
If you are seeing fields in the field catalog but are not seeing this field when creating the condition table then the field probably does not exist in the KOMG structure for allowed fields for condition structures. KOMG represents the total of KOMK and KOMP which are the pricing communication structures. If your field is not there then you need to append it to item data in INCLUDE KOMPAZ in KOMP since this is an item level field. If it were a header level field you would append it to include KOMKAZ in KOMK. The inclusion of new fields in KOMK or KOMP automatically means that they are also included in KOMG.
After doing this you will see the field when creating a table. There is further documentation on this process in the IMG under SPRO-> Materials Management-> Purchasing-> Conditions-> Define Price determination Process -> System Enhancements - View the documentation associated to this node in the IMG
Hope this helps,
Matt -
How to get condition type for invoice
How to get the condition type for invoice.
i want tables and corresponding fieldsSunil,
KONV ,T685T and the following are related tablesVBAK,VBRP,VBAP,VBFA.
K.Kiran. -
How to setup the timeout time about container mangement transaction?
hi
i want to modify the time-out time about cantainer management transaction.
but i don't know where and how to setup it....
please tell me how to do it, thanks a lot.
JoeWe haven't been using the session pool, just the direct Jolt classes, but
the only way we've found to set the timeout is via a transaction time, it
seems to be the only one that has any effect.
hth
Mike
Maybe you are looking for
-
Macbook Pro to Toshiba LCD via HDMI screen shuts off
I have a mid 2010 model Macbook pro hooked up to a 46'' Toshiba LCD tv using the moshi connector and an HDMI cable. Every 25-30 minutes the screen goes black for 2-3 seconds as well the sound turns off. The picture then comes back, usually to shut of
-
Pdf form keeps overwriting it's text boxes
I'm able to enter characters in a text box, but the same characters go in to all the text box fields in my pdf. Meaning my name is in 10 different form boxes. And as soon as i move to another text box all that was previously written is overwritten -
-
Why do I get a blinking folder with a question mark after remote locking my Macbook?
Hi, I wanted to try the remote lock feature of iCloud. I remotely locked my 17 inch Mid 2009 MacBook Pro. I received the confirmation email stating that the machine had indeed been locked. When I went to the machine to unlock it, I was surprised to s
-
Ethernet default over wireless connection.
when I boot up I want my network to default to the ethernet which is connected to the Dynadock U3.0 before the wireless in the Lenovo x220 laptop. The ethernet is much faster. is there any way I can have this occur automatically - rather than me havi
-
Enormous data overages / not sure how
Hi- I was billed nearly $1000 for data overages in one month - my normal bill is around $100. This has never happened before and I have no idea how it happened. In the past, I got several texts every single time we were about to go over. We only got