How to setup a Provider topology using OSPF as IGRP for P and PE routers

Hi,
I am trying to create a typical provider topology in GNS3.
I would like to know what IOS to use for the:
- P routers
- PE routers
Also the minimum Hardware to use for:
- P routers
- PE routers
I am also going to use OSPF for the IGRP on the MPLS devices.
From what I am reading so far you would need 4 routers for the P routers, 4 routers for the PE routers and 2 CE's pointing to the 2 PE's
                              ce
                           pe     pe
                            |        |
                           p--------p
                            |        |
                           p--------p
                            |        |
                           pe       pe
                               ce
Kindly help send a link if there is any.
Thanks,

Hi Reynaldo,
There is no clear answer for your questions.
I would like to know what IOS to use for the:
It depends on what features do you need.
Also the minimum Hardware to use for:
It depends on size/traffic load/number of devices in your network
From what I am reading so far you would need 4 routers for the P routers, 4 routers for the PE routers and 2 CE's pointing to the 2 PE's
It depends on your topology how much redundancy do you need, how big is your budget. If you can not afford big spending, you don't have to implement any P routers. So for certain traffic your core routers will be P routers and for another type of traffic will be PE routers. 
My answers probably won't help you, but I am afraid that for these types of general questions there are not any other answers.
Best Regards
Please rate all helpful posts and close solved questions

Similar Messages

  • Can I setup my Browser to use my DSL line for downloads and T1 line for uploading

    Hi,
    i would like to setup my browser to use my DSL internet connection to open my emails from google and when i am sending it to use my T1 line. Please let me know if its even possible in a browser.
    Thanks

    The Operating System is what controls the incoming and outgoing connections, so that is really a Windows support issue.
    The only thing that I can think of is to ask in one of the Satellite forums over here, for some ideas on how you might accomplish that:
    http://www.dslreports.com/forum/
    Satellite internet works similar to that, the download comes by Satellite, and the upload goes out by dial-up or other land connection.

  • How to setup Adobe CC to use Firefox instead of Internet Explorer

    How to setup Adobe CC to use Firefox instead of Internet Explorer

    Hi mOmO,
    Please chage the default browser to Firefox: http://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default.
    Regards,
    Romit Sinha

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

  • HT204053 I am using my Apple ID for me and for my wife. when I sync. the phones i lost all my wife contact. how do i recover the contact from i cloud?

    I am using my Apple ID for me and for my wife. when I sync. the phones i lost all my wife contact. how do i recover the contact from i cloud?

    While I have a few ideas, I think you'd have better luck troubleshooting this in the iCloud forum.

  • How to setup a variant to do full repair request for 0Material?

    How to setup a variant to do full repair request for 0Material?
    Thanks
    York

    Hi,
    Do you mean to set up a varinat in process chain?
    Regards
    Srini

  • How to setup my iPad to sync automatically not only the movies and songs I have bought but also the tv shows?

    How to setup my iPad to sync automatically not only the movies and songs I have bought but also the tv shows?

    Chris Bui wrote:
    Thank you Diavonex......... This is not a joke and please do respect when people really need help.
    Diavonex was not treating this as a joke. He was giving you the answer to your question in a perfectly polite and respectful way. Without the Apple ID credentials to which the iPad is locked or proof that you are the original purchaser, there's nothing you can do. The device is useless to you.

  • How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

    How to get accurate photo printouts using  FlexScan S1932 screen, Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

    You need to work with the calibration parameters to get a good match from screen to print. There are no fixed values - basically whatever settings produce a match are the right ones.
    First, set the white point - luminance and color - so that screen white is a visual equivalent to paper white. You can be very specific about this, with a viewing booth right next to the display and a particular paper as target. Or you can take a more generalistic approach. That too will usually work well, as long as you keep the aim in sight: screen white = paper white.
    Don't trust the white point presets. You will usually have to adjust to compensate for your working environment. Make sure you can adjust both along the blue/yellow Kelvin scale and the green/magenta axis. Any given Kelvin value may well be wrong on the green/magenta axis.
    Next set a realistic black point. This is important. Monitor manufacturers throw about completely unrealistic contrast ranges that you will never see on paper. A good glossy inkjet paper will be in the vicinity of 250-300:1, or a black point around 0.4 - 0.5 cd/m² if your white point is at 120. If you have a monitor that goes down to, say, 0.2, which most monitors today will, you're in for an unpleasant surprise.
    Leave gamma at 2.2. Gamma is remapped from profile to profile and is "invisible" - the net result is always linear. You just want to stay close to native so that the monitor behaves at its best.
    If you have a wide gamut monitor soft proofing in Photoshop can be useful. With a standard gamut monitor it's mostly a waste of time since monitor gamut is the limiting one.
    Oh, and let Photoshop manage color. Make sure you have the right paper/ink profile and also make sure you have the right paper selected in the printer driver. This controls the total amount of ink.

  • How do I preserve the embedded hyperlinks when printing to .pdf?   I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it's just the flick of the right button – I just need help finding that

    How do I preserve the embedded hyperlinks when printing to .pdf? 
    I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it’s just the flick of the right button – I just need help finding that button. 
    Can you help?  Thanks!

    How:  MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
    I didn't have this problem at all on prior versions of Adobe on my PC.   This isn't a Mac attack, is it?

  • My iPhone 4 was stolen, how do i lock it permanently using a serial number for instance so nobody can use it or access my personal information, knowing that the thief knows my personal passcode.. Please help, Thanx

    My iPhone 4 was stolen, how do i lock it permanently using a serial number for instance so nobody can use it or access my personal information, knowing that the thief knows my personal passcode.. Please help, Thanx

    You cannot lock it by the serial number. Report it to your carrier and the police. You said that the thief knows your pass code. Does that mean that the thief was a personal friend who would be close enough to you to know what your code was? If that is the case, ask your friend to return your phone.

  • How is the performance of Mac Pro if i use it as host for windows and linux virtual machines.

    How is the performance of Mac Pro if i use it as host for windows and linux virtual machines.
    I am planning to buy a high performance PC to run my Windows and Linux servers as vitrual machines for my testing purposes.
    Initially i planned to build my own computer with recommended configurations but considering space constaints and cooling factors i think Mac Pro can be a choice. But need some inputs if Mac pro (Intel Xeon E5, 12 GB RAM) is good for running virtual Machines.

    You could even run Windows natively and still run your VM servers.
    I have seen reports and such on MacRumors and elsewhere - run Windows natively as well as VMs (can also do testing and run Mavericks in a VM under Mavericks)
    The fast internal PCIe-SSD, plus 6 or 8 cores, and 32-64GB RAM. Of course for $5,000 for 8-core, some Thunderbolt storage and 32GB/64GB RAM you can buy some serious hardware.

  • My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

    My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

    Use different email address (gmail?) just for FaceTime and Messages.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • How does the system knows age or seniority is crossed for so and so... EE

    Hi Experts,
    In my project we have configured some Health plans based on ages and seniority,
    Employee can enroll in to the plan when they reach the age or seniority,
    my question is how does the system knows  age or seniority is crossed for so and so... EE, where exactly we do this setups
    Pleae let me know your valuable answers
    Regards
    Sreeni

    hr_entry_date and you can use various
    fm to calculate this, It reads 0019, 0041 or Hdate feature
    3QP8                           Time related calculation function mod.
    HR_AUPBS_SENIORITY             Calculate the whole length of service of employee
    3RP3A                          Leave schem proration modules
    SGPS_LS_SENIORITY_CALCULATION  Function for seniority calculation for Singapore Leave Scheme
    HRDO
    HR_DE_PBS_SENIORITY_PERIODS
    HRFPBS4AV0
    HR_PSF_AV_ANC_INPUT_SENIORITY
    HRF_METADATA_IT
    HRF_READ_SENIORITY_IT

  • How we will know whether RFC destinations have been created for sender and

    Hi,
        How we will know whether RFC destinations have been created for sender and XI system.
    Thanks,
    dhanush.

    Hi Dhanush,
    you can check using the TCODE SM59.
    Regards
      Kenny

Maybe you are looking for

  • Portrait and landscape in the same document.

    Hi there. I'm trying to print a portfolio that has both portrait and landscape pages in it. I understand that I can change printing propoerties to print in either portrait or landscape, but is there any way to configure settings so that both are pres

  • I can't reset an Apple ID - Apple site down?

    I can get the email confirmation; but when i click on the reset link, it should take me to the password reset page, but it does not; the screen is just blank like a dead link

  • Library filter keyword search odd results for containing keywords

    I have a keyword tree Family>Smith>Peter.  I used the library filter keyword containing "family". This produced a large list of images and in the keyword tag box I saw the word "Family" with an asterix. I deleted the family keyword from the list and

  • Getting an error - group function not allowed here

    Below is the merge statement... getting an error - group function not allowed here WHY???? merge into summary using (select a.user_id, min(a.start_time_utc), max(a.end_time_utc), sum(a.duration_seconds), /*total_upload total_download total_traffic,*/

  • Does Firefox 4 have the same cache policy as 3.6 ?

    Hi, FF4 doesn't seem to cache all SWF files, like 3.6 used to. For instance, check it out for yourself on this 6.7 MB file... http://pantheondev.dyndns.org/dummy.swf No matter how many times you view the SWF file, it always loads from the server and