How to setup a Proxy Server for SSL

Hello,
We have a proxy server that uses the same port for http and https. How can I setup a proxy server in OSB (10gR3) for my business services to use with same port for both http and https?
Thanks,
Mike.

Hi Mike,
The problem is OSB doesn't seem to let me set the same port for both http and https on a proxy.Can you please let us know the exact problem you are facing? I hope you would have referred below links as well -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/eclipsehelp/ui_ref.html#wp1347580
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#systemadminProxyAdding
You may set the proxy server at JVM level as well (workaround).
Regards,
Anuj

Similar Messages

How to setup a Proxy server

Hi all,
I have an airpot extreme router and I want to setup a proxy server to navigate Internet. I don't see any possible setup in the menus. Is it possible to do it?
Thank you

There are a number of different types of proxy servers. The AirPort, like most Internet routers, perform as a very basic tunneling proxy or gateway by providing NAT services.
What are you trying to use a proxy server for? Are you planning on setting up a dedicated proxy server device or use a router for some proxy functions like monitoring or scanning traffic inbound/outbound of your network?

How to set a Proxy Server for appletv

The network I'm on requires that I set a Proxy server to get out to the internet.
Is there anyway to specify a Proxy server for AppleTV?

Hi Red-Baron,
The Apple TV does not support Proxy Server configuration (http://docs.info.apple.com/article.html?artnum=305010). An alternative is to enable internet sharing on a computer and have the Apple TV connect to that computer.
Regards,
John

How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaena

As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp

CRM 2013 - How to set a Proxy server for plugins to run with?

We have several plugins that need to query web services on the Internet, and I need them to go through a specific proxy server. How do I set this without hard coding the proxy into the plugins? I've tried adding the proxy to the machine.config,
I've updated the web.config in the CRMWeb folder, I've even added the proxy to IE under the users used by the App Pool Identity then used netsh winhttp to make this a system proxy. None of these have allowed my registered plugins to access the internet.
Any thoughts? Thanks.

The way I'd do it is to not rely on .config files, but instead set it programmatically in the plugin, and either store the proxy configuration data in the configuration string for the plugin registration step, or store it in some custom configuration entity
in CRM
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

How to setup IOS DHCP server for redundancy?

Hi
The customer has 2 core (cat6). Plan to enable DHCP service on them for IP phones.
How to setup them so there is a redundancy for DHCP service?
Thanks in advance!

Setup two routers and have them split the range of addresses that they lease out. The pools should be non overlapping.

PAP2T - how to setup SIP proxy and codec on PAP2T

Hello
How to setup SIP Proxy server IP addres and codec settings on PAP2T ?

Your question here appears related to or a continuation of this previous question — is this the case?
Based on the previous posting, whatever information you're receiving from the vendor support folks appears rather garbled or confused, particularly based on that "The vendor mentioned that we need to route the DNS and get it working (forwarded) on port 80 and I'd tend to avoid them." comment over there.
I'd ask the vendor for documentation and details (as on its face, a requirement for this proxy seems, well, somewhat questionable), but yes, you're probably in the Apache config files here, and probably using overrides and .htaccess if the site is low-volume, as that'll keep the changes isolated for testing.
Out of curiousity, is this proxy project part of an attempt to get this package to accessible, but without the vendor actually having the package running on port 80? (Got a pointer to the package? We can check the docs, and see if we can translate the installation requirements into something useful on OS X Server.)
Are you running 10.5 or 10.6? Both are pretty old releases.

How to setup Adobe Media Server Professional x 2 run as cluster for load balance?

How to setup Adobe Media Server Professional x 2 run as cluster for load balance?

Hi,
Welcome to adobe forums,
Please refer to these help files in order to setup AMS as a cluster : https://helpx.adobe.com/adobe-media-server/config-admin/load-balancing.html
https://helpx.adobe.com/adobe-media-server/tech-overview/scaling-server.html
Let me know if you need any help.
Regards,
Puspendra

How to setup the SMTP server in Oracle apps?

Hi,
How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
Thanks,
Bijoy
Edited by: user12070886 on Feb 6, 2013 4:26 AM
Edited by: user12070886 on Feb 6, 2013 4:27 AM

How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? No, it is not mandatory. Also please note that the mails are sent out from concurrent manager mode. Not from the database node.
Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
>
It depends on the operating system you are using. If you are using *nix then sendmail needs to be configured.
Thanks

How to size a proxy server

Can anyone provide insight into how to size a proxy server? We would be using SUN hardware... Most importantly, type of server to buy, memory, number and configuration of cache disks.
For specifics.... we would have about 4000 users, and would spread the load across at least two machines.
Thanks

Hi
Please check out the following guide
http://docs.sun.com/db/coll/S1-webproxysrvrguides
Thanks
regards
maneesh.

How to set the proxy server in MIDP?

I will establish an HttpConnertion and use it to contact a website.
I use a simulators to test the HttpConnertion program by JBuilder,I can't contact the outside website. how to specify the proxy for a MIDlet application

[huangs_07],
This depends on the CLDC/MIDP implementation of the device e.g. the Palm's CLDC/kVM Java Application Manager software contains a menu for a Palm user to input the http proxy server for all the MIDlets to use when making a http connection.
What emulator are using to test your MIDlet that is making the http connection?
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How to setup a company code for material management

Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DIL

Hello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri

How to setup a global artwork for a TV Show

Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks.
ie. when watching the Tv Shows (library on iTunes) I would like to see the global artwork of the Tv Show that is different of the other 45s episodes contained.
Bye, Roberto.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

How to setup a Proxy Server for SSL

Similar Messages

Maybe you are looking for